Bush Hog SM 60 manual Optional Safety Chain Installation, Belting Installation

Page 21

CAUTON

USE OF THIS MACHINE ON TOO SMALL A TRACTOR CAN CAUSE TRACTOR UPSET. DO NOT USE THIS MACHINE ON A TRACTOR WEIGHING LESS THAN 6000 LBS. (2722 kg),

NOT INCLUDING BALLAST. IT IS RECOM- MENDED THAT FRONT BALLAST BE USED FOR ADDED STEERING STABILITY. THIS MACHINE REQUIRES 50 PTO HORSEPOWER.

5-2 OPTIONAL SAFETY CHAIN INSTALLATION

A. Place cutter deck in the travel (stored) position. Insert transport lock pin.

B. Remove the skid shoes from the side bands.

C. Position chain guard assembly so that mount- ing holes align with holes in deck.

D.Fasten using 3/8 x 1-1/4” bolts, flatwashers, lockwashers, and nuts. (Fig. 5-3)

E.Align skid shoes with holes in chain guard assembly and side bands.

F.Fasten skids into position with 3/8 x 1-1/4” clipped share bolts, flatwasher, lockwashers and nuts.

G.If chain assemblies are used on the front and rear of the cutter deck, skid fillers should be installed between the front and rear skid shoes. (Fig. 4-3)

5-3 BELTING INSTALLATION

A. Align belting with holes in lip of cutter deck.

B. Fasten with 3/8 x 1-1/4” bolts, flatwashers and locknuts. (Fig. 5-4)

5-4 OPTIONAL SIDEWHEEL INSTALLATION

A. Position sidewheel on cutter deck as shown (Fig. 5-5)

B. Fasten sidewheel assembly to cutter deck using 3/8 x 3” bolts and locknuts through deck braces and 3/8 x 1-1/4” bolts and locknuts through side band.

The sidewheel is adjustable in one inch increments for a cutting height of 1-6 inches. To adjust, remove bolts securing wheel assembly to mounting brackets. Reassemble installing bolts in holes corresponding to desired cutting height.

When cutter is equipped with both sidewheel and tailwheel, the adjustment of one can affect adjust- ment of the other. When cutting a ditch or bank, sidewheel and tailwheel can be adjusted indepen- dently as needed.

Figure 5-3

Side Band

Chain Guard Assy.

Skid Shoe

 

 

Figure 5-4

Cutter Deck Lip

Belting

Figure 5-5

 

Mounting

 

Bracket

Deck Brace

 

Side Band

Side wheel Assembly

 

 

 

 

 

18

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Bush HOG Congratulations Retail CUSTOMER’S Responsibility Under the Bush HOG Warranty Table of ContentsDisclaimer of Implied Warranties & Consequential Damages This Limited Warranty Shall not ApplySM60 Rotary Cutter Dealer Preparation Check ListImportant Safety Precautions Important Safety Precautions Employee Tractor Operating Instructions EMPLOYERS, Employees and OperationsThis Act Seeks Osha RegulationsSection IntroductionDescription Mounting Cutter on Tractor For Cast Iron Pump & Motor OnlySM160R Driveline Modification Tractor Requirements and Recommendations OperationRecommendations Parking Reversing Blade RotationMaintenance Check List Maintenance Check ListStorage Lubrication Refer to FigYearly Recommended Hydraulic OilsBlade Replacement Blade Holder InstallationCable Adjustment Adjusting Hydraulic PressureList of Recommended Hydraulic Oils Manufacturer TroubleshootingTrouble Probable Cause Remedy General TroubleshootingSection Assembly Hydraulic Valve Kit Basic Machine AssemblyOptional Safety Chain Installation Belting InstallationOptional Sidewheel Installation Adjustment Optional Tailwheel InstallationSafety Decals 83374 83373 83377 82617 83375 Recommended Torque in Foot Pounds Newton Meters Torque Specifications

SM 60 specifications

The Bush Hog SM 60 is a versatile and durable rotary mower designed primarily for use in agricultural and landscaping applications. Known for its robust construction and exceptional performance, this machine is ideal for managing grass, brush, and overgrown vegetation, making it a valuable asset for farmers, ranchers, and landowners alike.

One of the main features of the Bush Hog SM 60 is its cutting width, which measures 60 inches. This allows for efficient mowing of large areas, reducing the time spent on maintenance tasks. The mower is equipped with a heavy-duty gearbox that provides reliable power transmission while enhancing its overall durability. This ensures that the SM 60 can handle tough mowing conditions with ease.

The design of the Bush Hog SM 60 incorporates a sturdy frame made from high-quality materials, which provides stability and strength. The mower is built to withstand harsh environments and frequent use, ensuring long-lasting performance. Additionally, the SM 60 features a reinforced deck that helps to prevent soil buildup and maintains clean, efficient cutting.

Technologically, the Bush Hog SM 60 is equipped with a set of three high-lift blades that are designed for superior cutting performance. These blades facilitate efficient grass distribution, resulting in a clean cut that promotes healthy regrowth. Furthermore, the blade design reduces the risk of clumping, which is especially crucial in wet conditions.

Another noteworthy characteristic of the SM 60 is its adjustable cutting height. Users can easily modify the height of the mower to achieve the desired level of cut, providing flexibility for different mowing conditions and types of vegetation. This feature is particularly beneficial when transitioning between various terrains, ensuring optimal performance no matter the situation.

The Bush Hog SM 60 is designed to be compatible with a variety of tractors, making it a versatile tool for any operator. Its ease of attachment and operation allows users to quickly switch from one implement to another, enhancing overall productivity.

In summary, the Bush Hog SM 60 is a powerful rotary mower that combines durability with efficiency. Its impressive features, including a wide cutting deck, robust construction, and high-performance blades, make it an exceptional choice for anyone in need of a reliable mowing solution. Whether it's for maintaining pastureland, managing brush, or enhancing landscape aesthetics, the Bush Hog SM 60 stands out as a top-tier option in the rotary mower market.
Top Page Image Contents