Bush Hog SM 60 manual Reversing Blade Rotation, Parking

Page 13

WARNING

KEEP CLEAR OF MACHINE WHEN RAISING AND LOWERING THE CUTTER HEAD.

D. Place cutter deck in desired working position. E. Engage PTO drive with tractor at idle speed.

Allow 2-3 minutes for hydraulic fluid to warm up.

DANGER

KEEP HANDS AND FEET FROM UNDER CUT- TER AT ALL TIMES TO AVOID SERIOUS INJURY.

F. Set tractor throttle for tractor/implement PTO speed rating (540 or 1000 rpm).

WARNING

IT IS RECOMMENDED THAT TRACTOR BE EQUIPPED WITH ROLLOVER PROTECTIVE SYSTEM (ROPS) AND THAT A SEAT BELT BE USED BY THE OPERATOR FOR ALL MOWING OPERATIONS.

G. Place tractor in gear and begin cutting. Do not exceed 3 mph forward speed. Use caution when working along a ditch. If cutter contacts ground, encounters thick brush, or hits an obstacle, it may cause tractor front wheels to slide into ditch. For this reason it is recommended, when cutting in a ditch where obstacles (i.e. stumps, rocks) cannot be seen, that the cutter deck be adjusted 2-3 inches above normal cutting height. Do not stall cutter repeated- ly or operate in stalled position as overheating will occur.

IMPORTANT

WHEN USED ON TRACTORS WEIGHING MORE THAN 10,000 LBS. (4536 KG), CARE MUST BE USED TO PREVENT BENDING THE SLIDE ASSEMBLY IF CUTTER DECK STRIKES AN IMMOVABLE OBJECT.

The cutter deck pivot cylinder is a single-acting cylinder having hydraulic pressure only for rais- ing the cutter deck. When working on steep banks with the cutter on the uphill side of tractor, the cutter deck can be raised high enough to go over the cen- ter of gravity. If this happens, the tractor will have to be driven to more level ground to lower deck. This condition should be avoided if possible.

Always be aware that cutter deck and counter- weight box may extend beyond tractor. This is especially important when working along roads and traveling through gates and around buildings. A slow moving vehicle (SMV) sign and tractor warning lights are recommended for working along highways. A bracket is provided on weight box for SMV sign.

WARNING

ALL ROTARY CUTTERS HAVE THE ABILITY TO DISCHARGE OBJECTS AT HIGH SPEEDS, WHICH COULD RESULT IN SERIOUS INJURY TO BYSTANDERS OR PASSERS-BY.

THEREFORE, THIS CUTTER IS NOT TO BE OPERATED ALONG HIGHWAYS OR IN ANY AREA WHERE PEOPLE MAY BE PRESENT UNLESS ALL SIDES OF THE UNIT ARE ENCLOSED BY PERMANENT BANDS, SAFE- TY CHAINS, OR OTHER FACTORY APPROVED SAFETY SHIELDS THAT ARE IN GOOD REPAIR.

3-3 REVERSING BLADE ROTATION

Some cutting operations may require a counter- clockwise blade rotation. This may be achieved by replumbing the reversible motor. Replumbing pro- cedures are given in paragraph 4-9.

WARNING

DO NOT OPERATE CUTTER WITH COUNTER- CLOCKWISE BLADE ROTATION UNLESS CUT- TER DECK IS EQUIPPED WITH SAFETY CHAINS AND THE OPERATOR WEAR SAFETY GLASSES AND SAFETY (HARD) HAT. SAFETY CHAINS WILL REDUCE AMOUNT OF DEBRIS THROWN TOWARD OPERATOR. IT IS HIGHLY RECOM- MENDED THAT OPERATOR BE PROTECTED WITH ROLLOVER PROTECTIVE SYSTEM (ROPS) ENCLOSED CAB AND THAT SEAT BELT BE USED FOR ALL MOWING OPERATIONS.

3-4 PARKING

A. Apply tractor parking brake. B. Disengage PTO drive.

C. Slide cutter deck in.

D. After all blade motion has stopped, raise and pin cutter deck in the travel position. (Fig. 2-3)

WARNING

KEEP CLEAR OF MACHINE WHEN RAISING AND LOWERING THE CUTTER HEAD.

E. Pin stand in the down position. (Fig. 3-1) F. Lower implement to rest on ground.

G. Shut down tractor.

Figure 3-1 Parking Stand

Stand In Down (Parked) Position

10

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Bush HOG Congratulations Retail CUSTOMER’S Responsibility Under the Bush HOG Warranty Table of ContentsDisclaimer of Implied Warranties & Consequential Damages This Limited Warranty Shall not ApplySM60 Rotary Cutter Dealer Preparation Check ListImportant Safety Precautions Important Safety Precautions Employee Tractor Operating Instructions EMPLOYERS, Employees and OperationsThis Act Seeks Osha RegulationsIntroduction SectionDescription For Cast Iron Pump & Motor Only Mounting Cutter on TractorSM160R Driveline Modification Operation Tractor Requirements and RecommendationsRecommendations Parking Reversing Blade RotationMaintenance Check List Maintenance Check ListStorage Lubrication Refer to FigYearly Recommended Hydraulic OilsBlade Replacement Blade Holder InstallationCable Adjustment Adjusting Hydraulic PressureList of Recommended Hydraulic Oils Manufacturer TroubleshootingTrouble Probable Cause Remedy General TroubleshootingSection Assembly Hydraulic Valve Kit Basic Machine AssemblyBelting Installation Optional Safety Chain InstallationOptional Sidewheel Installation Adjustment Optional Tailwheel InstallationSafety Decals 83374 83373 83377 82617 83375 Recommended Torque in Foot Pounds Newton Meters Torque Specifications

SM 60 specifications

The Bush Hog SM 60 is a versatile and durable rotary mower designed primarily for use in agricultural and landscaping applications. Known for its robust construction and exceptional performance, this machine is ideal for managing grass, brush, and overgrown vegetation, making it a valuable asset for farmers, ranchers, and landowners alike.

One of the main features of the Bush Hog SM 60 is its cutting width, which measures 60 inches. This allows for efficient mowing of large areas, reducing the time spent on maintenance tasks. The mower is equipped with a heavy-duty gearbox that provides reliable power transmission while enhancing its overall durability. This ensures that the SM 60 can handle tough mowing conditions with ease.

The design of the Bush Hog SM 60 incorporates a sturdy frame made from high-quality materials, which provides stability and strength. The mower is built to withstand harsh environments and frequent use, ensuring long-lasting performance. Additionally, the SM 60 features a reinforced deck that helps to prevent soil buildup and maintains clean, efficient cutting.

Technologically, the Bush Hog SM 60 is equipped with a set of three high-lift blades that are designed for superior cutting performance. These blades facilitate efficient grass distribution, resulting in a clean cut that promotes healthy regrowth. Furthermore, the blade design reduces the risk of clumping, which is especially crucial in wet conditions.

Another noteworthy characteristic of the SM 60 is its adjustable cutting height. Users can easily modify the height of the mower to achieve the desired level of cut, providing flexibility for different mowing conditions and types of vegetation. This feature is particularly beneficial when transitioning between various terrains, ensuring optimal performance no matter the situation.

The Bush Hog SM 60 is designed to be compatible with a variety of tractors, making it a versatile tool for any operator. Its ease of attachment and operation allows users to quickly switch from one implement to another, enhancing overall productivity.

In summary, the Bush Hog SM 60 is a powerful rotary mower that combines durability with efficiency. Its impressive features, including a wide cutting deck, robust construction, and high-performance blades, make it an exceptional choice for anyone in need of a reliable mowing solution. Whether it's for maintaining pastureland, managing brush, or enhancing landscape aesthetics, the Bush Hog SM 60 stands out as a top-tier option in the rotary mower market.
Top Page Image Contents