Bush Hog SM 60 manual Recommended Hydraulic Oils, Yearly

Page 15

Figure 4-1 Lubrication

Replace Yearly

Check Before Each Use

40 Hours

40 Hours

 

 

 

 

 

40 Hours

 

150 Hours

 

 

 

 

 

 

 

 

 

 

Figure 4-2 Driveline Universal Joint

Before Each Use

To Remove Yoke Shield: Press all three tabs with screwdriver and slide cover back.

EVERY 150 HOURS

1.Cables - Wearing gloves, wipe cables with an oil soaked rag.

YEARLY

1.Hydraulic Tank - Drain hydraulic tank while oil is warm.Clean suction strainer and filler strainer with compressed air. Replace return line filter. Refill tank with hydraulic oil. Filter oil to 10 microns before filling tank. See paragraph 4-3 for recommended hydraulic oils. Tank capacity is 35 gal. (132.5l.).

NOTE

The suction strainer and filler strainer are located inside the hydraulic tank. They are accessible by

20 Hours

Before Each Use

removing the tank lid secured by eight self-tapping screws. A gasket is required for reassembly.

2.Spindle Assembly - Drain spindle housing. Refill with EP80W-90 gear oil. Capacity is 26 fl. oz.

4-3 RECOMMENDED HYDRAULIC OILS

Recommended hydraulic oils are listed in Table 4-3 (page 13). Other brands may be used provided they are equivalent. Approved hydraulic oils may be mixed provided that anti-wear oils are mixed with anti-wear oils. All hydraulic oils listed in Table 4-3 are anti-wear oils. Do not use motor oil or trans- mission oil.

12

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Bush HOG Congratulations Retail CUSTOMER’S Responsibility Under the Bush HOG Warranty Table of ContentsDisclaimer of Implied Warranties & Consequential Damages This Limited Warranty Shall not ApplySM60 Rotary Cutter Dealer Preparation Check ListImportant Safety Precautions Important Safety Precautions Osha Regulations EMPLOYERS, Employees and OperationsEmployee Tractor Operating Instructions This Act SeeksSection IntroductionDescription Mounting Cutter on Tractor For Cast Iron Pump & Motor OnlySM160R Driveline Modification Tractor Requirements and Recommendations OperationRecommendations Parking Reversing Blade RotationLubrication Refer to Fig Maintenance Check ListMaintenance Check List StorageYearly Recommended Hydraulic OilsAdjusting Hydraulic Pressure Blade Holder InstallationBlade Replacement Cable AdjustmentList of Recommended Hydraulic Oils Manufacturer TroubleshootingTrouble Probable Cause Remedy General TroubleshootingSection Assembly Hydraulic Valve Kit Basic Machine AssemblyOptional Safety Chain Installation Belting InstallationOptional Sidewheel Installation Adjustment Optional Tailwheel InstallationSafety Decals 83374 83373 83377 82617 83375 Recommended Torque in Foot Pounds Newton Meters Torque Specifications

SM 60 specifications

The Bush Hog SM 60 is a versatile and durable rotary mower designed primarily for use in agricultural and landscaping applications. Known for its robust construction and exceptional performance, this machine is ideal for managing grass, brush, and overgrown vegetation, making it a valuable asset for farmers, ranchers, and landowners alike.

One of the main features of the Bush Hog SM 60 is its cutting width, which measures 60 inches. This allows for efficient mowing of large areas, reducing the time spent on maintenance tasks. The mower is equipped with a heavy-duty gearbox that provides reliable power transmission while enhancing its overall durability. This ensures that the SM 60 can handle tough mowing conditions with ease.

The design of the Bush Hog SM 60 incorporates a sturdy frame made from high-quality materials, which provides stability and strength. The mower is built to withstand harsh environments and frequent use, ensuring long-lasting performance. Additionally, the SM 60 features a reinforced deck that helps to prevent soil buildup and maintains clean, efficient cutting.

Technologically, the Bush Hog SM 60 is equipped with a set of three high-lift blades that are designed for superior cutting performance. These blades facilitate efficient grass distribution, resulting in a clean cut that promotes healthy regrowth. Furthermore, the blade design reduces the risk of clumping, which is especially crucial in wet conditions.

Another noteworthy characteristic of the SM 60 is its adjustable cutting height. Users can easily modify the height of the mower to achieve the desired level of cut, providing flexibility for different mowing conditions and types of vegetation. This feature is particularly beneficial when transitioning between various terrains, ensuring optimal performance no matter the situation.

The Bush Hog SM 60 is designed to be compatible with a variety of tractors, making it a versatile tool for any operator. Its ease of attachment and operation allows users to quickly switch from one implement to another, enhancing overall productivity.

In summary, the Bush Hog SM 60 is a powerful rotary mower that combines durability with efficiency. Its impressive features, including a wide cutting deck, robust construction, and high-performance blades, make it an exceptional choice for anyone in need of a reliable mowing solution. Whether it's for maintaining pastureland, managing brush, or enhancing landscape aesthetics, the Bush Hog SM 60 stands out as a top-tier option in the rotary mower market.
Top Page Image Contents