Bush Hog 865H, 665H, 765H manual Attaching KIT Instructions For 965H

Page 30

Figure 21
								207																								213
																					207
(965H)
(965H)																			217

																								210					220
																								210					220



																										221
																										221										216


										210


																																	210

																																					203

									208
						206			208

	205
																						200
																						200
																																								204

			210
			210

														219


													210			209
													210			209											207



																																						203

207

218

210

210

202

			215

					214
212					214
212


	211

ATTACHING KIT INSTRUCTIONS (For 965H)

3-POINT HITCH LINKAGE & HYDRAULIC HOOK-UP

TO TRACTOR HYDRAULIC SYSTEMS

General Description

Mounting and hydraulic kits include two hoses which can be used in connecting the backhoe control valve to the tractor hydraulic system. Additional hydraulic components or kits will be required to complete the hook-up to the tractor hydraulic system. Refer to “Hydraulic Hook-Up” section for further information. Pump and reservoir kits are available as options.

The backhoe is mounted on the tractor lower link arms and an adjustable upper link is supplied to replace the tractor upper link. A set of stabilizer arms are included. They bolt from the adjustable upper

link to the backhoe mainframe, locking the hoe rigid- ly in one position.

IMPORTANT- Tractor lower links must be kept free of lifting forces at all times, after installation of the attaching kit, by keeping tractor quadrant lever in the lowered position.

IMPORTANT: If the 3-Point Kit is to be used with a PTO & Reservoir Kit, the Reservoir Tank and it’s fit- tings should be installed before proceeding with the 3-Point installation.

28

Image 30

Contents Bush HOG Congratulations Backhoes This Limited Warranty Shall not Apply Disclaimer of Implied Warranties & Consequential DamagesDealer Preparation Check List 665H 765H 865H 965H BackhoesTractor BackhoeAdjustments and Inspection TransportationAvoid HIGH-PRESSURE Fluids Safety Decals Osha Regulations Employee Tractor Operating InstructionsThis Act Seeks Child Labor Under 16 Years OldKeep bystanders a safe distance away Engine SpeedControls Page Transporting the Backhoe When Transporting Placing the StabilizersFilling the Bucket Dumping the BucketFinishing Straight Walls Side Slope Excavating or TrenchingMiscellaneous BackfillingHydraulic System Hoses Beginning of SeasonBleeding Backhoe Hydraulic System Hydraulic System ReservoirTooth Replacement Tightening Nuts and BoltsLubrication Install the swing safety lock pin as shown in Figures 1 Removal from Tractor StorageHydraulic Trouble Shooting Stabilizer Pads 765H, 865H and 965HCauses and Corrections Replace Center Section Assemblies Replacing Spool SealsAssembly Do not cut any strapping that fastens the back Be sure hoist Used is suitable, has suffiCient capacity and is in the proper position. Do Hoe mainframe and swing frame to the skid atAssembly Refer to Figures 13 Attaching KIT Instructions For 865H General DescriptionAssembly Hydraulic Hook-Up Closed Center System 665H &765H Hook-Up Requirements Hook-Up DiagramHydraulic Hook-Up 865H & 965H Backhoe OperationAttaching KIT Instructions For 965H Assembly Refer to For Tractors with OPEN-CENTER Hydraulic Systems Tractor PreparationBackhoe Preparation Assembly of a Bush HOG Backhoe to a Bush HOG Loader Valve Bush HOG Backhoe & Bush HOG Loader Valve Assembly Outlet Or 8 GPM PTO Pump KIT Assembly10 .5 GPM PTO Pump KIT 11 .5 GPM PTO Pump KITGPM Pump KIT Pump Plate PositionsSeries Models 665H and 765H Models 865H Shown 965H Page Bush HOG, L.L.C

Related manuals

Manual 1 pages 22.78 Kb