Bush Hog 5045 manual External Loader AND/OR TRAC- TOR Valve, Neutral Position, Float Position

Page 16

3-4 EXTERNAL LOADER AND/OR TRAC- TOR VALVE.

NOTE

When properly installed, the tractor remote valve or external valve control lever/levers will control the loader hydraulic circuits as described below. Refer to tractor Operator’s Manual for further explanation of tractor remote control lever/levers.

IMPORTANT

Contaminants in hydraulic fluid can cause valve spools to stick. BE ALERT when operating loader and follow your tractor Operator’s Manual hydraulic fluid maintenance schedule.

3-5 LOADER MOUNTED CONTROL VALVE EQUIPPED WITH SINGLE LEVER CONTROL HANDLE OR TRACTOR REMOTE VALVE EQUIPPED WITH SIN- GLE LEVER CONTROL HANDLE

If your loader utilizes a loader control valve equipped with single lever control handle or tractor remote valve equipped with single lever control handle, it will function as shown in Figure 3-1.

Figure 3-1

3-6 LOADER MOUNTED SERIES CON- TROL VALVE EQUIPPED WITH SINGLE LEVER CONTROL HANDLE

If your loader utilizes a loader mounted series con- trol valve equipped with single lever control handle, it will function as shown in Figure 3-2.

Figure 3-2

3-7 NEUTRAL POSITION

The loader external valve provided by Bush Hog has a “neutral position” which prevents movement of the loader or attachment. When the control handle is manually released from the work position, the valve spool will return to the neutral position.

3-8 FLOAT POSITION

The loader external valve provided by Bush Hog has a “float position” incorporated into the lift cylinder cir- cuit which allows the loader to float. This float fea- ture is important for satisfactory operation when scraping, sweeping, leveling, or any job where it is necessary to follow the contour of the surface. To activate the float position, lower the bucket or attach- ment and push the control handle all the way for- ward into detent. The valve will stay in float detent position until the operator manually pulls the control handle out of detent position to deactivate float.

3-9 REGENERATIVE VALVE POSITION

When the handle is pushed all the way to the right, it will go past the dump detent position into the regenerative position. This position requires the operator to hold it in place. This feature enhances the performance and speed of the dump procedure.

3-10 LOAD SENSE LOADER VALVE

IMPORTANT

If your loader is equipped with a load sense type control valve it may demonstrate the following operation characteristic. Attempting to raise the boom by finely feathering the control lever may actually allow the boom to lower very slowly. To prevent this from happening, move the control lever far enough to ensure that the boom raises.

3-11 LOADER OPERATION

Before operating the loader, fully raise and lower the boom three or four times. Then raise the loader bucket approximately four (4) feet above the ground and cycle the bucket two or three times. Lower the bucket or attachment to the ground. Check the trac- tor hydraulic fluid level and fill as required. Refer to the tractor Operator’s Manual for the proper hydraulic fluid and the correct hydraulic fluid level.

14

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Bush HOG Congratulations Table of Contents 3545 / 4045 / 5045This Limited Warranty Shall not Apply Disclaimer of Implied Warranties & Consequential DamagesDealer Preparation Check List Safety Alert Symbol Tractor Important Safety PrecautionsLoader Safety Precautions Operating the LoaderEMPLOYERS, Employees and Operations Employee Tractor Operating InstructionsSection Introduction and Description IntroductionTechnical Specifications Preparing Tractor Section Loader Mounting and DismountingMounting Loader Pin In Operating Position Dismounting Loader 10 Hydraulic Hoses Quick CouplersGeneral Safety Section Operating InstructionsPRE-OPERATION Initial Loader OperationExternal Loader AND/OR TRAC- TOR Valve Neutral PositionFloat Position Regenerative Valve PositionRemoving AIR from Hydraulic System Bucket Level Indicator RODHose Identification Lifting the Load Not this Do this Dump Lower Leverrollback Controlsraise Operating with Float Control Do this Not this Bale Spear Operation Soil PileFork Lift Operation TransportingSkid Steer Quick Hitch Operation Section Maintenance Maintenance Check ListTroubleshooting Hydraulic System Pressure RequirementsTroubleshooting Procedures Problem Possible Cause Remedy Section V Assembly Tractor PreparationTractor Ballast InstallationHydraulic Hookup Fork Lift Option Bale Spear OptionDigging Teeth Optional Bucket Items Assembly Spill Guard AttachmentTine Teeth Side Cutting Edges Torque Specifications AmericanSafety Decals DecalsBush HOG L.L.C Walvoil Valve Mounting Instructions Walvoil Valve Mounting Instructions Valve Stand Assembly Instructions Single Handle Valve KIT Attaching Handle MOUNT, Control Handle Cables to Tractor Support Mount to Front of Tractor Attaching Valve to Loader Frame Connecting Hydraulics Refer to and Fig Adjust the cables so the control handle operates as follows Cable Control Valve KIT Installation Instructions For 24H46343 Power Beyond KIT Cable Control Walvoil Valve Assembly Standard Walvoil Valve Assembly Sept Instruction Sheet No H46344 ~ Assembly Instructions ~ Page Front Description Bush HOG Bush HOG 24H49871 Grapple Attachment
Related manuals
Manual 1 pages 38.86 Kb

5045 specifications

The Bush Hog 5045 represents a versatile and robust solution for agricultural needs, particularly for those requiring a reliable utility vehicle. This machine stands out for its combination of power, efficiency, and ease of use. Tailored for farm operations, landscaping tasks, and various outdoor chores, the 5045 has earned a reputation for its dependability and performance.

One of the main features of the Bush Hog 5045 is its powerful engine. Equipped with a reliable diesel engine, this model delivers excellent torque and performance, ensuring it can handle challenging terrains and tough workloads. The engine is designed for fuel efficiency, enabling users to maximize productivity while minimizing operating costs.

In terms of technology, the Bush Hog 5045 incorporates advanced hydraulic systems. The hydraulic capabilities enhance its versatility, allowing operators to attach a variety of implements like loaders, blades, and even backhoes. This adaptability makes it an invaluable asset on the farm or job site, as it can seamlessly switch between different tasks.

The 5045 also boasts a spacious operator platform with a comfortable seat and user-friendly controls. This ergonomic design not only ensures comfort during long working hours but also enhances safety and accessibility. The visibility from the operator's seat is excellent, allowing for better awareness of surroundings and improving overall operational safety.

Storage options are another noteworthy characteristic. The Bush Hog 5045 includes ample storage compartments for tools and other necessities, ensuring that operators have everything they need on hand while minimizing trips back to the workshop or garage.

Durability is a hallmark of the Bush Hog brand, and the 5045 is no exception. Built with high-quality materials, this utility vehicle withstands the rigors of daily use, ensuring longevity and reducing maintenance needs. The heavy-duty frame and robust components contribute to its ability to tackle tough tasks year after year.

Overall, the Bush Hog 5045 is a practical, durable, and efficient utility vehicle suited for a variety of applications. Whether it’s for farming, landscaping, or general maintenance, this model combines power with usability to meet the demands of modern agricultural operations. With its blend of features, technology, and robust construction, the Bush Hog 5045 continues to be a preferred choice among professionals in the field.
Top Page Image Contents