Bush Hog 5045 manual Attaching Valve to Loader Frame

Page 41

8.Rotate the valve ends of the cables through the notch at the bottom of the support tube and through the large hole in the support mount and floor board of the tractor. Attach the sup- port tube to the support mount as shown in Fig. 1. (NOTE: Take care to not cut cable cov- ering on sharp edges and be sure cable routing will not cause binding when attached to the valve).

9.Tighten all fasteners for handle controls and apply control decal to plate atop the support tube (Refer to Fig. 1).

10.ATTACHING VALVE TO LOADER FRAME:

Attach the valve mount to the outside surface of the pedestal on the mounting bracket of load on right hand side of the tractor. Use the 1/2” x 2 1/4” capscrews, 1/2” flatwashers, 1/2” lockwashers and 1/2” hex nuts as shown in Fig. 4.

11.Attach valve to valve mount using the (4) m8 x 1.25 x 20 Gr. 8.8 capscrews and m8 lock- washers as shown in Fig. 4. Be sure that the work ports are on top and the attaching ends of the spools are down.

12.It will be necessary to install the cable attaching kit on the cable in the order shown in Fig. 4. The nut, washer, flange and cap must be ran across the threaded part of the cable until they are hanging loose on the cable.

 

Fig. 4

 

VALVE MOUNT TO PEDESTAL :

 

 

(2) 1/2” X 2 1/4” CAPSCREWS

 

 

(2) 1/2” FLATWASHERS

 

 

(2) 1/2” LOCKWASHERS

 

 

(2) 1/2” HEX NUTS

 

 

VALVE MOUNT

 

 

 

 

LOADER

 

 

MOUNT BRACKET

Hoses and Quick

 

PEDESTAL

Disconnect Fittings Not

 

 

Shown for Clarity!

 

 

VALVE

 

 

SPOOL END

“O” RING

VALVE TO VALVE MOUNT :

 

 

PIN

(4) m8 x 1.25 x 20 CAPSCREWS

 

JOINT

(4) m8 LOCKWASHERS

 

 

 

JAMB NUT

 

 

CAP

 

 

FLANGE

 

 

SOCKET HEAD SCREW

 

 

WASHER

 

 

HEX NUT

 

LIFT CIRCUIT CABLE

ATTACHMENT CIRCUIT CABLE

 

 

Page 4

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Bush HOG Congratulations 3545 / 4045 / 5045 Table of ContentsDisclaimer of Implied Warranties & Consequential Damages This Limited Warranty Shall not ApplyDealer Preparation Check List Safety Alert Symbol Loader Important Safety PrecautionsTractor Operating the Loader Safety PrecautionsEmployee Tractor Operating Instructions EMPLOYERS, Employees and OperationsIntroduction Section Introduction and DescriptionTechnical Specifications Mounting Loader Section Loader Mounting and DismountingPreparing Tractor Pin In Operating Position 10 Hydraulic Hoses Quick Couplers Dismounting LoaderSection Operating Instructions General SafetyPRE-OPERATION Initial Loader OperationNeutral Position External Loader AND/OR TRAC- TOR ValveFloat Position Regenerative Valve PositionHose Identification Bucket Level Indicator RODRemoving AIR from Hydraulic System Lifting the Load Not this Do this Dump Lower Leverrollback Controlsraise Operating with Float Control Do this Not this Soil Pile Bale Spear OperationTransporting Fork Lift OperationSkid Steer Quick Hitch Operation Maintenance Check List Section MaintenanceHydraulic System Pressure Requirements TroubleshootingTroubleshooting Procedures Problem Possible Cause Remedy Tractor Preparation Section V AssemblyHydraulic Hookup InstallationTractor Ballast Bale Spear Option Fork Lift OptionTine Teeth Side Cutting Edges Optional Bucket Items Assembly Spill Guard AttachmentDigging Teeth American Torque SpecificationsDecals Safety DecalsBush HOG L.L.C Walvoil Valve Mounting Instructions Walvoil Valve Mounting Instructions Valve Stand Assembly Instructions Single Handle Valve KIT Attaching Handle MOUNT, Control Handle Cables to Tractor Support Mount to Front of Tractor Attaching Valve to Loader Frame Connecting Hydraulics Refer to and Fig Adjust the cables so the control handle operates as follows Cable Control Valve KIT Installation Instructions For 24H46343 Power Beyond KIT Cable Control Walvoil Valve Assembly Standard Walvoil Valve Assembly Sept Instruction Sheet No H46344 ~ Assembly Instructions ~ Page Front Description Bush HOG Bush HOG 24H49871 Grapple Attachment
Related manuals
Manual 1 pages 38.86 Kb

5045 specifications

The Bush Hog 5045 represents a versatile and robust solution for agricultural needs, particularly for those requiring a reliable utility vehicle. This machine stands out for its combination of power, efficiency, and ease of use. Tailored for farm operations, landscaping tasks, and various outdoor chores, the 5045 has earned a reputation for its dependability and performance.

One of the main features of the Bush Hog 5045 is its powerful engine. Equipped with a reliable diesel engine, this model delivers excellent torque and performance, ensuring it can handle challenging terrains and tough workloads. The engine is designed for fuel efficiency, enabling users to maximize productivity while minimizing operating costs.

In terms of technology, the Bush Hog 5045 incorporates advanced hydraulic systems. The hydraulic capabilities enhance its versatility, allowing operators to attach a variety of implements like loaders, blades, and even backhoes. This adaptability makes it an invaluable asset on the farm or job site, as it can seamlessly switch between different tasks.

The 5045 also boasts a spacious operator platform with a comfortable seat and user-friendly controls. This ergonomic design not only ensures comfort during long working hours but also enhances safety and accessibility. The visibility from the operator's seat is excellent, allowing for better awareness of surroundings and improving overall operational safety.

Storage options are another noteworthy characteristic. The Bush Hog 5045 includes ample storage compartments for tools and other necessities, ensuring that operators have everything they need on hand while minimizing trips back to the workshop or garage.

Durability is a hallmark of the Bush Hog brand, and the 5045 is no exception. Built with high-quality materials, this utility vehicle withstands the rigors of daily use, ensuring longevity and reducing maintenance needs. The heavy-duty frame and robust components contribute to its ability to tackle tough tasks year after year.

Overall, the Bush Hog 5045 is a practical, durable, and efficient utility vehicle suited for a variety of applications. Whether it’s for farming, landscaping, or general maintenance, this model combines power with usability to meet the demands of modern agricultural operations. With its blend of features, technology, and robust construction, the Bush Hog 5045 continues to be a preferred choice among professionals in the field.
Top Page Image Contents