Bush Hog 5045 manual Attaching Handle MOUNT, Control Handle Cables to Tractor

Page 38

BUSH HOG L.L.C.

MOUNTING INSTRUCTIONS

50051729 CABLE CONTROL VALVE KIT

50051730 CABLE CONTROL VALVE KIT

HYDRAULIC ATTACHMENT

FOR MID MOUNT LOADERS

(See Page 2 for Mounting Instructions)

WARNING

THE LOADER CAN FALL FROM HYDRAULIC

SYSTEM FAILURE. TO AVOID SERIOUS

INJURY OR DEATH, SECURELY SUPPORT

LOADER BEFORE WORKING UNDERNEATH.

CAUTION

USE A PIECE OF CARDBOARD OR WOOD RATHER

THAN HANDS AND WEAR EYE PROTECTION WHEN

SEARCHING FOR HYDRAULIC LEAKS. ESCAPING

HYDRAULIC OIL UNDER PRESSURE CAN PENETRATE

SKIN. IF OIL IS INJECTED INTO SKIN, IT MUST BE

SURGICALLY REMOVED WITHIN A FEW HOURS BY A

DOCTOR OR GANGRENE MAY RESULT.

ATTACHING HANDLE MOUNT, CONTROL HANDLE

AND CABLES TO TRACTOR

1.CAUTION: Before leaving tractor seat, stop engine, lock brake, relieve hydraulic pressure, and remove key. Do Not allow bystanders in work area.

2.Locate an area in the front-right side of tractor floor board to mount the support mount. (NOTE: If the floor board has a floor matt, role the matt back in the area chosen to check for pre-drilled mounting holes by the tractor manufacturer). If mounting holes will have to be drilled, make sure the area on the underside of the floor board has no cables, tubes, linkages or any other obstructions that would interfere or be damaged by drilling to mount the support weldment.

Page 1 03/11/06 62-06

Instruction Sheet No. 50051651

Image 38
Contents Bush HOG Congratulations Table of Contents 3545 / 4045 / 5045This Limited Warranty Shall not Apply Disclaimer of Implied Warranties & Consequential DamagesDealer Preparation Check List Safety Alert Symbol Loader Important Safety PrecautionsTractor Safety Precautions Operating the LoaderEMPLOYERS, Employees and Operations Employee Tractor Operating InstructionsSection Introduction and Description IntroductionTechnical Specifications Mounting Loader Section Loader Mounting and DismountingPreparing Tractor Pin In Operating Position Dismounting Loader 10 Hydraulic Hoses Quick CouplersPRE-OPERATION General SafetySection Operating Instructions Initial Loader OperationFloat Position External Loader AND/OR TRAC- TOR ValveNeutral Position Regenerative Valve PositionHose Identification Bucket Level Indicator RODRemoving AIR from Hydraulic System Lifting the Load Not this Do this Dump Lower Leverrollback Controlsraise Operating with Float Control Do this Not this Bale Spear Operation Soil PileFork Lift Operation TransportingSkid Steer Quick Hitch Operation Section Maintenance Maintenance Check ListTroubleshooting Hydraulic System Pressure RequirementsTroubleshooting Procedures Problem Possible Cause Remedy Section V Assembly Tractor PreparationHydraulic Hookup InstallationTractor Ballast Fork Lift Option Bale Spear OptionTine Teeth Side Cutting Edges Optional Bucket Items Assembly Spill Guard AttachmentDigging Teeth Torque Specifications AmericanSafety Decals DecalsBush HOG L.L.C Walvoil Valve Mounting Instructions Walvoil Valve Mounting Instructions Valve Stand Assembly Instructions Single Handle Valve KIT Attaching Handle MOUNT, Control Handle Cables to Tractor Support Mount to Front of Tractor Attaching Valve to Loader Frame Connecting Hydraulics Refer to and Fig Adjust the cables so the control handle operates as follows Cable Control Valve KIT Installation Instructions For 24H46343 Power Beyond KIT Cable Control Walvoil Valve Assembly Standard Walvoil Valve Assembly Sept Instruction Sheet No H46344 ~ Assembly Instructions ~ Page Front Description Bush HOG Bush HOG 24H49871 Grapple Attachment
Related manuals
Manual 1 pages 38.86 Kb

5045 specifications

The Bush Hog 5045 represents a versatile and robust solution for agricultural needs, particularly for those requiring a reliable utility vehicle. This machine stands out for its combination of power, efficiency, and ease of use. Tailored for farm operations, landscaping tasks, and various outdoor chores, the 5045 has earned a reputation for its dependability and performance.

One of the main features of the Bush Hog 5045 is its powerful engine. Equipped with a reliable diesel engine, this model delivers excellent torque and performance, ensuring it can handle challenging terrains and tough workloads. The engine is designed for fuel efficiency, enabling users to maximize productivity while minimizing operating costs.

In terms of technology, the Bush Hog 5045 incorporates advanced hydraulic systems. The hydraulic capabilities enhance its versatility, allowing operators to attach a variety of implements like loaders, blades, and even backhoes. This adaptability makes it an invaluable asset on the farm or job site, as it can seamlessly switch between different tasks.

The 5045 also boasts a spacious operator platform with a comfortable seat and user-friendly controls. This ergonomic design not only ensures comfort during long working hours but also enhances safety and accessibility. The visibility from the operator's seat is excellent, allowing for better awareness of surroundings and improving overall operational safety.

Storage options are another noteworthy characteristic. The Bush Hog 5045 includes ample storage compartments for tools and other necessities, ensuring that operators have everything they need on hand while minimizing trips back to the workshop or garage.

Durability is a hallmark of the Bush Hog brand, and the 5045 is no exception. Built with high-quality materials, this utility vehicle withstands the rigors of daily use, ensuring longevity and reducing maintenance needs. The heavy-duty frame and robust components contribute to its ability to tackle tough tasks year after year.

Overall, the Bush Hog 5045 is a practical, durable, and efficient utility vehicle suited for a variety of applications. Whether it’s for farming, landscaping, or general maintenance, this model combines power with usability to meet the demands of modern agricultural operations. With its blend of features, technology, and robust construction, the Bush Hog 5045 continues to be a preferred choice among professionals in the field.