Bush Hog RMB 1660 manual Tractor Safety Devices, Tractor Horsepower, Point Hitch, Hydraulics

Page 61

OPERATION

3.5 Tractor Safety Devices

If transporting or operating the tractor and implement near a public roadway, the tractor must be equipped with proper warning lighting and a Slow Moving Vehicle (SMV) emblem which are clearly visible from the rear of the unit. Lights and a SMV emblem must be equipped directly on implements if the visibility of the tractor warning signals are obscured.

Maintain all manufacturer equipped safety shields and guards. Always replace shields and guards that were removed for access to connect, service, or repair the tractor or implement. Never operate the tractor PTO with the PTO master shield missing or in the raised position. OPS-U- 0004

3.6 Tractor Horsepower

The horsepower required to operate the mower depends on many factors including vegetation to be cut, terrain condition, operator experience, and condition of the mower and tractor. For most mowing condition, the 1660 boom mower requires a tractor with at least 60 HP PTO. Operating the mower with a tractor that does not have adequate power may damage the tractor engine.

3.7 3-Point Hitch

1660 boom mowers can attach to tractors with a CAT II hitch. Refer to the tractor operator’s manual for the category of the tractor used. If the hitch does not conform to ASABE Cat II dimensions, the mower may not fit or raise properly. Consult an authorized dealer for possible modification procedures to mount nonconforming hitches.

Use the correct hitch pins for the hitch category being used. For Cat II hitches it requires 1-1/8” lower and 1” upper diameter hitch pins.

CAT II Implement/ Hitch Specification

 

Width from outside to outside A-frame

32-3/8”

Quick Hitch width inside lug to lug

33-5/8”

Height from bottom hitch pin to top pin

19”

Lower pin diameter

1-1/18”

Upper pin diameter

1”

Lynch pin diameter

15/32”

3.8 Hydraulics

The 1660 is available with a Totally Independent Hydraulic System complete with Rotor Rotation Control. The rotor can be started, stopped, or reversed by operating a lever on the Control Console.

RMB 1660 11/10

Operation Section 4-7

© 2010 Alamo Group Inc.

OPERATION

Page 60 Page 62
Image 61
Page 60 Page 62
Contents RMB To the Owner/Operator/Dealer Warranty InformationOsha Training Requirements Alamo Group Ag. Division is willing to provide Table of Contents Maintenance Section Safety Section General Safety Instructions and Practices SafetyOperator Safety Instructions and Practices SG-36 Wait a minute...Save a life Equipment Operation Safety Instructions and Practices RMB 1660 11/10 Safety Section Stop Mowing if Passersby are Within 300 Feet Unless Safety SGM-06 SGM-08 Maintenance and Service Safety Instructions and Practices Safety Parts Information Transporting Safety Instructions and PracticesSafety Concluding Safety Instructions and Practices Decal Location Name LogoBooklet ReflectMULTI-DECAL InstructSerial Plate Decal Description Safety Safety Model Name RMB Safety Safety Safety Federal Laws and Regulations Page Introduction Section Introduction Introduction Before Operating this Machine Assembly Section Tractor Selection AssemblyFitting Operator Guard Tractor PreparationSuggestions to increase stability Dealer Setup InstructionsAttachment to Tractor Assembly Assembly Assembly Assembly Assembly Assembly Flail Head Attachment Fitting Control Unit in CAB OIL RequirementsTank Cable Controlled ModelsRemoval from Tractor Running UP ProcedureSubsequent Attachment to Identical Tractor StorageSubsequent Attachment to Different Tractor Page Operation Section Operation Operation Standard Equipment and SpecificationsPersonal Protective Equipment PPE Operator RequirementsRops and Seat Belt Tractor RequirementsOperator Thrown Object Protection Tractor Ballast Tractor Lighting and SMV EmblemTractor Horsepower Tractor Safety Devices3-Point Hitch HydraulicsPower Take Off PTO Front End WeightGetting on and OFF the Tractor Dismounting the Tractor Boarding the TractorStarting the Tractor Tractor Pre-Operation Inspection/Service PRE-OPERATION Inspection and ServiceBoom Unit Pre-Operation Inspection and Service Boom ARM Assembly Frame AssemblyHydraulic Line Inspection Hydraulic PUMP/OIL Reservoir Flail Head Inspection Sickle BAR Inspection Do not Operate an Unsafe Tractor or Mower Do not Operate an Unsafe Tractor or Implement Cable Controls Identification & Function Machine ControlsLever Functions Rotor Control With Slew selected BreakawayForward Speed Rotor Operating SpeedHigh Voltage Cables Hedge Cutting Procedure Working on Adverse Slopes Lift Float Kit OptionalDriving the Tractor and Implement Starting the Tractor Brake and Differential Lock SettingDriving the Tractor and Boom Operating the Tractor and ImplementForeign Debris Hazards Bystanders/Passersby PrecautionsEngaging the Power Take Off PTO Operating the Mower Operating Speed and Ground SpeedSGM-08 Grass Flail Operating the Attached Mower HeadsSickle Bar Shutting Down the Attached Head Transporting the Tractor and Implement TRACTOR, BOOM, and Attached Head StorageTransport Position Transport POSITION-Head Removal Transport POSITION-Head AttachedTransporting on Public Roadways Transport HeightOperation Operation Hauling the Tractor and Implement Trouble Possible Cause Possible Remedy Troubleshooting GuideOperation Page Maintenance Section General LubricationHydraulic System Filtration MaintenanceHydraulic Hoses Oil SupplyHose Warranty Hose ReplacementCables FlailheadPTO Gearbox Proper Torque Values for Fasteners Limited Warranty Required of the Operator Required of the OwnerRMB 1660 Rear Mount Boom Mower

RMB 1660 specifications

The Bush Hog RMB 1660 is a robust and versatile rotary mower that is designed for heavy-duty use in a variety of agricultural and landscaping applications. Known for its reliability and cutting efficiency, the RMB 1660 has gained a reputation among farmers, landscapers, and property owners alike. This rotary cutter is ideal for managing overgrown fields, clearing brush, and maintaining large properties with ease.

One of the standout features of the RMB 1660 is its impressive cutting capability. Equipped with a 60-inch cutting width, it allows operators to cover large areas quickly and efficiently. The cutting deck is constructed from high-quality steel, ensuring durability and resistance to wear and tear. This strong build also supports the mower's ability to tackle tough terrain and heavy grass.

The Bush Hog RMB 1660 is powered by a reliable and efficient engine that provides ample horsepower for even the most challenging mowing conditions. Its advanced driveline system delivers consistent power to the cutting deck, ensuring a clean and precise cut every time. The mower’s design also incorporates a balanced weight distribution, which enhances maneuverability and stability on uneven grounds.

Technologically, the RMB 1660 comes with several innovative features that enhance performance and ease of use. It includes adjustable cutting height capabilities, allowing operators to customize their mowing experience based on specific needs. The mower's simple height adjustment system makes it easy to switch between different grass lengths without the need for tools.

Safety is a paramount concern with the Bush Hog RMB 1660. The mower is designed with several safety features, including a safety chain that secures the mower to the tractor and a shield that protects the operator from flying debris. These features ensure a safer mowing experience, making it a reliable choice for users.

In addition to its impressive features, the RMB 1660 is designed for easy maintenance. Accessible grease points and easy-to-remove blades streamline maintenance tasks and minimize downtime, allowing users to focus on their trimming and mowing activities.

Overall, the Bush Hog RMB 1660 combines power, efficiency, and user-friendly features into a single package, making it an ideal choice for anyone seeking a reliable rotary mower capable of handling a variety of mowing tasks. Whether you are a commercial landscaper or a homeowner managing a large property, the RMB 1660 delivers exceptional performance, making it a valuable addition to any equipment lineup.
Top Page Image Contents