Bush Hog RMB 1660 manual Engaging the Power Take Off PTO

Page 84
(SGM-09)
(SFL-6)

OPERATION

OPERATION

Flail Mowers are capable under adverse conditions of throwing objects for great distances (300 feet or more) and causing serious injury or death. Follow safety messages carefully.

STOP MOWING IF PASSERSBY ARE WITHIN 300 FEET UNLESS:

-Front and Rear Deflectors, Chain Guards, or Bands are installed and in good, workable condition;

-Mower sections or Wings are running close to and parallel to the ground without exposed Blades;

-All areas have been thoroughly inspected and all foreign material such as rocks, cans, glass, and general debris has been removed.

NOTE: Where there are grass and weeds high enough to hide debris that could be

struck by the blades, the area should be: inspected and large debris removed, mowed at an intermediate height, inspected closely with any remaining debris being removed, and mowed again at desired final height. (This will also reduce power required to mow, reduce wear and tear on the Mower drivetrain, spread cut material better, eliminate streaking, and make the final cut more uniform.)

15.3 Engaging the Power Take Off (PTO)

Before engaging the PTO, make certain that the area is clear of bystanders and passersby. The implement must be completely lowered and the deck positioned at a safe operating height. NEVER engage the PTO with the implement in the raised position.

Set the tractor engine speed at approximately 1,000 RPM before engaging the PTO. Shift the PTO control to the on position, and slowly increase the engine speed until the PTO is operating at the rated speed. If you hear unusual noises or see or feel abnormal vibrations, disengage the PTO immediately. Inspect the implement to determine the cause of the noise or vibration and repair the abnormality. OPS-U- 0027

Do not put hands or feet under mower decks. Blade Contact can result in serious injury or even death. Stay away until all motion has stopped and the decks are securely blocked up.

RMB 1660 11/10

Operation Section 4-30

© 2010 Alamo Group Inc.

Page 83 Page 85
Image 84
Page 83 Page 85
Contents RMB Warranty Information To the Owner/Operator/DealerOsha Training Requirements Alamo Group Ag. Division is willing to provide Table of Contents Maintenance Section Safety Section Safety General Safety Instructions and PracticesOperator Safety Instructions and Practices SG-36 Wait a minute...Save a life Equipment Operation Safety Instructions and Practices RMB 1660 11/10 Safety Section Stop Mowing if Passersby are Within 300 Feet Unless Safety SGM-06 SGM-08 Maintenance and Service Safety Instructions and Practices Safety Transporting Safety Instructions and Practices Parts InformationSafety Concluding Safety Instructions and Practices Decal Location Logo NameBooklet ReflectInstruct MULTI-DECALSerial Plate Decal Description Safety Safety Model Name RMB Safety Safety Safety Federal Laws and Regulations Page Introduction Section Introduction Introduction Before Operating this Machine Assembly Section Assembly Tractor SelectionTractor Preparation Fitting Operator GuardDealer Setup Instructions Suggestions to increase stabilityAttachment to Tractor Assembly Assembly Assembly Assembly Assembly Assembly Flail Head Attachment OIL Requirements Fitting Control Unit in CABTank Cable Controlled ModelsRunning UP Procedure Removal from TractorStorage Subsequent Attachment to Identical TractorSubsequent Attachment to Different Tractor Page Operation Section Operation Standard Equipment and Specifications OperationOperator Requirements Personal Protective Equipment PPETractor Requirements Rops and Seat BeltOperator Thrown Object Protection Tractor Lighting and SMV Emblem Tractor BallastTractor Safety Devices Tractor Horsepower3-Point Hitch HydraulicsFront End Weight Power Take Off PTOGetting on and OFF the Tractor Boarding the Tractor Dismounting the TractorStarting the Tractor PRE-OPERATION Inspection and Service Tractor Pre-Operation Inspection/ServiceBoom Unit Pre-Operation Inspection and Service Frame Assembly Boom ARM AssemblyHydraulic Line Inspection Hydraulic PUMP/OIL Reservoir Flail Head Inspection Sickle BAR Inspection Do not Operate an Unsafe Tractor or Mower Do not Operate an Unsafe Tractor or Implement Machine Controls Cable Controls Identification & FunctionLever Functions Rotor Control Breakaway With Slew selectedRotor Operating Speed Forward SpeedHigh Voltage Cables Hedge Cutting Procedure Lift Float Kit Optional Working on Adverse SlopesDriving the Tractor and Implement Brake and Differential Lock Setting Starting the TractorOperating the Tractor and Implement Driving the Tractor and BoomBystanders/Passersby Precautions Foreign Debris HazardsEngaging the Power Take Off PTO Operating Speed and Ground Speed Operating the MowerSGM-08 Operating the Attached Mower Heads Grass FlailSickle Bar Shutting Down the Attached Head TRACTOR, BOOM, and Attached Head Storage Transporting the Tractor and ImplementTransport Position Transport POSITION-Head Attached Transport POSITION-Head RemovalTransport Height Transporting on Public RoadwaysOperation Operation Hauling the Tractor and Implement Troubleshooting Guide Trouble Possible Cause Possible RemedyOperation Page Maintenance Section Lubrication GeneralFiltration Maintenance Hydraulic SystemHydraulic Hoses Oil SupplyHose Replacement Hose WarrantyFlailhead CablesPTO Gearbox Proper Torque Values for Fasteners Limited Warranty Required of the Owner Required of the OperatorRMB 1660 Rear Mount Boom Mower

RMB 1660 specifications

The Bush Hog RMB 1660 is a robust and versatile rotary mower that is designed for heavy-duty use in a variety of agricultural and landscaping applications. Known for its reliability and cutting efficiency, the RMB 1660 has gained a reputation among farmers, landscapers, and property owners alike. This rotary cutter is ideal for managing overgrown fields, clearing brush, and maintaining large properties with ease.

One of the standout features of the RMB 1660 is its impressive cutting capability. Equipped with a 60-inch cutting width, it allows operators to cover large areas quickly and efficiently. The cutting deck is constructed from high-quality steel, ensuring durability and resistance to wear and tear. This strong build also supports the mower's ability to tackle tough terrain and heavy grass.

The Bush Hog RMB 1660 is powered by a reliable and efficient engine that provides ample horsepower for even the most challenging mowing conditions. Its advanced driveline system delivers consistent power to the cutting deck, ensuring a clean and precise cut every time. The mower’s design also incorporates a balanced weight distribution, which enhances maneuverability and stability on uneven grounds.

Technologically, the RMB 1660 comes with several innovative features that enhance performance and ease of use. It includes adjustable cutting height capabilities, allowing operators to customize their mowing experience based on specific needs. The mower's simple height adjustment system makes it easy to switch between different grass lengths without the need for tools.

Safety is a paramount concern with the Bush Hog RMB 1660. The mower is designed with several safety features, including a safety chain that secures the mower to the tractor and a shield that protects the operator from flying debris. These features ensure a safer mowing experience, making it a reliable choice for users.

In addition to its impressive features, the RMB 1660 is designed for easy maintenance. Accessible grease points and easy-to-remove blades streamline maintenance tasks and minimize downtime, allowing users to focus on their trimming and mowing activities.

Overall, the Bush Hog RMB 1660 combines power, efficiency, and user-friendly features into a single package, making it an ideal choice for anyone seeking a reliable rotary mower capable of handling a variety of mowing tasks. Whether you are a commercial landscaper or a homeowner managing a large property, the RMB 1660 delivers exceptional performance, making it a valuable addition to any equipment lineup.
Top Page Image Contents