Bush Hog RMB 1660 manual Shutting Down the Attached Head

Page 88
(SG-10)

OPERATION

OPERATION

15.7 Shutting Down the Attached Head

To shut down attached mower head, first bring the tractor to a complete stop. Decrease engine RPM to idle then disengage cutterhead. The mower head will come to a complete stop within a suitable amount of time. Do not engage or disengage the cutterheads at a high RPM unless there is an emergency situation.

Park the tractor on a level surface, place the transmission in park or neutral and apply the parking brake, shut down the engine, remove the key, and wait for all motion to come to a complete stop before exiting the tractor. OPS-B- 0011_J

BEFORE leaving the tractor seat lower the implement, set the parking brake and/or set the tractor transmission in parking gear, disengage the PTO, stop the engine, remove the key, and wait for all moving parts to stop. Place the tractor shift lever into a low range or parking gear to prevent the tractor from rolling. Never dismount a Tractor that is moving or while the engine is running. Operate the Tractor controls from the tractor seat only. (SG-9)

Always shut the Tractor completely down, place the transmission in park, and set the parking brake before you or anyone else attempts to connect or disconnect the Implement and Tractor hitches. (S3PT-15)

Never allow children or other persons to ride on the Tractor or Implement.

Falling off can result in serious injury or death.

RMB 1660 11/10

Operation Section 4-34

© 2010 Alamo Group Inc.

Page 87 Page 89
Image 88
Page 87 Page 89
Contents RMB Warranty Information To the Owner/Operator/DealerOsha Training Requirements Alamo Group Ag. Division is willing to provide Table of Contents Maintenance Section Safety Section Safety General Safety Instructions and PracticesOperator Safety Instructions and Practices SG-36 Wait a minute...Save a life Equipment Operation Safety Instructions and Practices RMB 1660 11/10 Safety Section Stop Mowing if Passersby are Within 300 Feet Unless Safety SGM-06 SGM-08 Maintenance and Service Safety Instructions and Practices Safety Transporting Safety Instructions and Practices Parts InformationSafety Concluding Safety Instructions and Practices Decal Location Logo NameBooklet ReflectMULTI-DECAL InstructSerial Plate Decal Description Safety Safety Model Name RMB Safety Safety Safety Federal Laws and Regulations Page Introduction Section Introduction Introduction Before Operating this Machine Assembly Section Assembly Tractor SelectionTractor Preparation Fitting Operator GuardDealer Setup Instructions Suggestions to increase stabilityAttachment to Tractor Assembly Assembly Assembly Assembly Assembly Assembly Flail Head Attachment OIL Requirements Fitting Control Unit in CABTank Cable Controlled ModelsRunning UP Procedure Removal from TractorSubsequent Attachment to Identical Tractor StorageSubsequent Attachment to Different Tractor Page Operation Section Operation Standard Equipment and Specifications OperationOperator Requirements Personal Protective Equipment PPERops and Seat Belt Tractor RequirementsOperator Thrown Object Protection Tractor Lighting and SMV Emblem Tractor BallastTractor Safety Devices Tractor Horsepower3-Point Hitch HydraulicsPower Take Off PTO Front End WeightGetting on and OFF the Tractor Boarding the Tractor Dismounting the TractorStarting the Tractor PRE-OPERATION Inspection and Service Tractor Pre-Operation Inspection/ServiceBoom Unit Pre-Operation Inspection and Service Boom ARM Assembly Frame AssemblyHydraulic Line Inspection Hydraulic PUMP/OIL Reservoir Flail Head Inspection Sickle BAR Inspection Do not Operate an Unsafe Tractor or Mower Do not Operate an Unsafe Tractor or Implement Machine Controls Cable Controls Identification & FunctionLever Functions Rotor Control Breakaway With Slew selectedForward Speed Rotor Operating SpeedHigh Voltage Cables Hedge Cutting Procedure Lift Float Kit Optional Working on Adverse SlopesDriving the Tractor and Implement Brake and Differential Lock Setting Starting the TractorOperating the Tractor and Implement Driving the Tractor and BoomBystanders/Passersby Precautions Foreign Debris HazardsEngaging the Power Take Off PTO Operating Speed and Ground Speed Operating the MowerSGM-08 Grass Flail Operating the Attached Mower HeadsSickle Bar Shutting Down the Attached Head TRACTOR, BOOM, and Attached Head Storage Transporting the Tractor and ImplementTransport Position Transport POSITION-Head Attached Transport POSITION-Head RemovalTransport Height Transporting on Public RoadwaysOperation Operation Hauling the Tractor and Implement Troubleshooting Guide Trouble Possible Cause Possible RemedyOperation Page Maintenance Section Lubrication GeneralFiltration Maintenance Hydraulic SystemHydraulic Hoses Oil SupplyHose Replacement Hose WarrantyFlailhead CablesPTO Gearbox Proper Torque Values for Fasteners Limited Warranty Required of the Owner Required of the OperatorRMB 1660 Rear Mount Boom Mower

RMB 1660 specifications

The Bush Hog RMB 1660 is a robust and versatile rotary mower that is designed for heavy-duty use in a variety of agricultural and landscaping applications. Known for its reliability and cutting efficiency, the RMB 1660 has gained a reputation among farmers, landscapers, and property owners alike. This rotary cutter is ideal for managing overgrown fields, clearing brush, and maintaining large properties with ease.

One of the standout features of the RMB 1660 is its impressive cutting capability. Equipped with a 60-inch cutting width, it allows operators to cover large areas quickly and efficiently. The cutting deck is constructed from high-quality steel, ensuring durability and resistance to wear and tear. This strong build also supports the mower's ability to tackle tough terrain and heavy grass.

The Bush Hog RMB 1660 is powered by a reliable and efficient engine that provides ample horsepower for even the most challenging mowing conditions. Its advanced driveline system delivers consistent power to the cutting deck, ensuring a clean and precise cut every time. The mower’s design also incorporates a balanced weight distribution, which enhances maneuverability and stability on uneven grounds.

Technologically, the RMB 1660 comes with several innovative features that enhance performance and ease of use. It includes adjustable cutting height capabilities, allowing operators to customize their mowing experience based on specific needs. The mower's simple height adjustment system makes it easy to switch between different grass lengths without the need for tools.

Safety is a paramount concern with the Bush Hog RMB 1660. The mower is designed with several safety features, including a safety chain that secures the mower to the tractor and a shield that protects the operator from flying debris. These features ensure a safer mowing experience, making it a reliable choice for users.

In addition to its impressive features, the RMB 1660 is designed for easy maintenance. Accessible grease points and easy-to-remove blades streamline maintenance tasks and minimize downtime, allowing users to focus on their trimming and mowing activities.

Overall, the Bush Hog RMB 1660 combines power, efficiency, and user-friendly features into a single package, making it an ideal choice for anyone seeking a reliable rotary mower capable of handling a variety of mowing tasks. Whether you are a commercial landscaper or a homeowner managing a large property, the RMB 1660 delivers exceptional performance, making it a valuable addition to any equipment lineup.
Top Page Image Contents