Bush Hog RMB 1660 manual Dealer Setup Instructions, Suggestions to increase stability

Page 42

ASSEMBLY

ASSEMBLY

Suggestions to increase stability:

•Increasing rear wheel track; a tractor with a wider wheel track is more stable.

•Ballasting the wheel; it is preferable to use external weights but liquid can be added to around 75% of the tire volume – water with anti-freeze or the heavier Calcium Chloride alternative can be used.

•Addition of weights – care should be taken in selecting the location of the weights to ensure they are added to a position that offers the greatest advantage.

•Front axle locking; a cylinder can be used to ‘lock’ the front axle in work only – locking the axle moves the ‘balance line’ and can be used to transfer weight to the front axle from the rear (check with tractor manufacturer).

The advice above is offered as a guide for stability only and is not a guide to tractor strength - it is therefore recommended that you consult your tractor manufacturer or local dealer to obtain specific advise on this subject, additionally advice should be sought from a tire specialist with regard to tire pressures and ratings suitable for the type and nature of the machine you intend to fit.

DEALER SETUP INSTRUCTIONS

1.The machine will be delivered in a partially dismantled condition, secured with transport strap and banding.

2.Choose a firm level site.

3.Remove the transport strap, banding straps and loose items.

4.Check the oil level.

5.Raise the machine using overhead lifting equipment with a minimum capacity of 3307 lbs. LEAVE IN POSITION AT THIS STAGE.

6.Lower the legs and pin in position selecting the holes that position the machines gearbox stub shaft approx. 3” below the tractors P.T.O. shaft.

NOTE: Leg pin position used.

7.Unbolt stabilizer from machine and remove the stabilizer nose quadrant pin.

RMB 1660 11/10

Assembly Section 3-4

© 2010 Alamo Group Inc.

Page 41 Page 43
Image 42
Page 41 Page 43
Contents RMB Warranty Information To the Owner/Operator/DealerOsha Training Requirements Alamo Group Ag. Division is willing to provide Table of Contents Maintenance Section Safety Section Safety General Safety Instructions and PracticesOperator Safety Instructions and Practices SG-36 Wait a minute...Save a life Equipment Operation Safety Instructions and Practices RMB 1660 11/10 Safety Section Stop Mowing if Passersby are Within 300 Feet Unless Safety SGM-06 SGM-08 Maintenance and Service Safety Instructions and Practices Safety Transporting Safety Instructions and Practices Parts InformationSafety Concluding Safety Instructions and Practices Decal Location Booklet LogoName ReflectInstruct MULTI-DECALSerial Plate Decal Description Safety Safety Model Name RMB Safety Safety Safety Federal Laws and Regulations Page Introduction Section Introduction Introduction Before Operating this Machine Assembly Section Assembly Tractor SelectionTractor Preparation Fitting Operator GuardDealer Setup Instructions Suggestions to increase stabilityAttachment to Tractor Assembly Assembly Assembly Assembly Assembly Assembly Flail Head Attachment Tank OIL RequirementsFitting Control Unit in CAB Cable Controlled ModelsRunning UP Procedure Removal from TractorStorage Subsequent Attachment to Identical TractorSubsequent Attachment to Different Tractor Page Operation Section Operation Standard Equipment and Specifications OperationOperator Requirements Personal Protective Equipment PPETractor Requirements Rops and Seat BeltOperator Thrown Object Protection Tractor Lighting and SMV Emblem Tractor Ballast3-Point Hitch Tractor Safety DevicesTractor Horsepower HydraulicsFront End Weight Power Take Off PTOGetting on and OFF the Tractor Boarding the Tractor Dismounting the TractorStarting the Tractor PRE-OPERATION Inspection and Service Tractor Pre-Operation Inspection/ServiceBoom Unit Pre-Operation Inspection and Service Frame Assembly Boom ARM AssemblyHydraulic Line Inspection Hydraulic PUMP/OIL Reservoir Flail Head Inspection Sickle BAR Inspection Do not Operate an Unsafe Tractor or Mower Do not Operate an Unsafe Tractor or Implement Machine Controls Cable Controls Identification & FunctionLever Functions Rotor Control Breakaway With Slew selectedRotor Operating Speed Forward SpeedHigh Voltage Cables Hedge Cutting Procedure Lift Float Kit Optional Working on Adverse SlopesDriving the Tractor and Implement Brake and Differential Lock Setting Starting the TractorOperating the Tractor and Implement Driving the Tractor and BoomBystanders/Passersby Precautions Foreign Debris HazardsEngaging the Power Take Off PTO Operating Speed and Ground Speed Operating the MowerSGM-08 Operating the Attached Mower Heads Grass FlailSickle Bar Shutting Down the Attached Head TRACTOR, BOOM, and Attached Head Storage Transporting the Tractor and ImplementTransport Position Transport POSITION-Head Attached Transport POSITION-Head RemovalTransport Height Transporting on Public RoadwaysOperation Operation Hauling the Tractor and Implement Troubleshooting Guide Trouble Possible Cause Possible RemedyOperation Page Maintenance Section Lubrication GeneralHydraulic Hoses Filtration MaintenanceHydraulic System Oil SupplyHose Replacement Hose WarrantyFlailhead CablesPTO Gearbox Proper Torque Values for Fasteners Limited Warranty Required of the Owner Required of the OperatorRMB 1660 Rear Mount Boom Mower

RMB 1660 specifications

The Bush Hog RMB 1660 is a robust and versatile rotary mower that is designed for heavy-duty use in a variety of agricultural and landscaping applications. Known for its reliability and cutting efficiency, the RMB 1660 has gained a reputation among farmers, landscapers, and property owners alike. This rotary cutter is ideal for managing overgrown fields, clearing brush, and maintaining large properties with ease.

One of the standout features of the RMB 1660 is its impressive cutting capability. Equipped with a 60-inch cutting width, it allows operators to cover large areas quickly and efficiently. The cutting deck is constructed from high-quality steel, ensuring durability and resistance to wear and tear. This strong build also supports the mower's ability to tackle tough terrain and heavy grass.

The Bush Hog RMB 1660 is powered by a reliable and efficient engine that provides ample horsepower for even the most challenging mowing conditions. Its advanced driveline system delivers consistent power to the cutting deck, ensuring a clean and precise cut every time. The mower’s design also incorporates a balanced weight distribution, which enhances maneuverability and stability on uneven grounds.

Technologically, the RMB 1660 comes with several innovative features that enhance performance and ease of use. It includes adjustable cutting height capabilities, allowing operators to customize their mowing experience based on specific needs. The mower's simple height adjustment system makes it easy to switch between different grass lengths without the need for tools.

Safety is a paramount concern with the Bush Hog RMB 1660. The mower is designed with several safety features, including a safety chain that secures the mower to the tractor and a shield that protects the operator from flying debris. These features ensure a safer mowing experience, making it a reliable choice for users.

In addition to its impressive features, the RMB 1660 is designed for easy maintenance. Accessible grease points and easy-to-remove blades streamline maintenance tasks and minimize downtime, allowing users to focus on their trimming and mowing activities.

Overall, the Bush Hog RMB 1660 combines power, efficiency, and user-friendly features into a single package, making it an ideal choice for anyone seeking a reliable rotary mower capable of handling a variety of mowing tasks. Whether you are a commercial landscaper or a homeowner managing a large property, the RMB 1660 delivers exceptional performance, making it a valuable addition to any equipment lineup.
Top Page Image Contents