Bush Hog RMB 1660 manual Safety

Page 19
(SG-37)
(SG-35)
(SG-21)
(SG-20)
(SG-14)
(SG-8)

SAFETY

Always maintain the safety signs in good readable condition. If the safety signs are missing, damaged, or unreadable, obtain and install replacement safety signs immediately. (SG-5)

Do not modify or alter this Implement. Do not permit anyone to modify or alter this Implement, any of its components or any Implement function.

Never work under the Implement, the framework, or any lifted component unless the Implement is securely supported or blocked up to prevent sudden or inadvertent falling which could cause serious injury or even death.

Never attempt to lubricate, adjust, or remove material from the Implement while it is in motion or while tractor engine is running.

Periodically inspect all moving parts for wear and replace when necessary with authorized service parts. Look for loose fasteners, worn or broken parts, and leaky or loose fittings. Make sure all pins have cotter pins and washers. Serious injury may occur from not maintaining this machine in good working order.

Do Not fill fuel tank while engine is running. Refuel only after engine has cooled down. If fuel is spilled, move machine away from the area of the spill and avoid creating any source of ignition until the gasoline has evaporated. (SG-28)

Perform service, repairs and lubrication according to the maintenance section. Ensure the unit is properly lubricated as specified in the lubrication schedule and all bolts and nuts are properly torqued. Failure to properly service, repair and maintain this Implement in good operating condition could cause component failure and possible serious injury or even death.

Use caution and wear protective gloves when handling sharp objects such as blades, knives, and other cutting edges. Be alert to worn component surfaces which have sharp edges. Sharp surfaces can inflict severe laceration injuries if proper hand protection is not worn.

SAFETY

RMB 1660 11/10

Safety Section 1-13

© 2010 Alamo Group Inc.

Page 18 Page 20
Image 19
Page 18 Page 20
Contents RMB To the Owner/Operator/Dealer Warranty InformationOsha Training Requirements Alamo Group Ag. Division is willing to provide Table of Contents Maintenance Section Safety Section General Safety Instructions and Practices SafetyOperator Safety Instructions and Practices SG-36 Wait a minute...Save a life Equipment Operation Safety Instructions and Practices RMB 1660 11/10 Safety Section Stop Mowing if Passersby are Within 300 Feet Unless Safety SGM-06 SGM-08 Maintenance and Service Safety Instructions and Practices Safety Parts Information Transporting Safety Instructions and PracticesSafety Concluding Safety Instructions and Practices Decal Location Reflect LogoName BookletMULTI-DECAL InstructSerial Plate Decal Description Safety Safety Model Name RMB Safety Safety Safety Federal Laws and Regulations Page Introduction Section Introduction Introduction Before Operating this Machine Assembly Section Tractor Selection AssemblyFitting Operator Guard Tractor PreparationSuggestions to increase stability Dealer Setup InstructionsAttachment to Tractor Assembly Assembly Assembly Assembly Assembly Assembly Flail Head Attachment Cable Controlled Models OIL RequirementsFitting Control Unit in CAB TankRemoval from Tractor Running UP ProcedureSubsequent Attachment to Identical Tractor StorageSubsequent Attachment to Different Tractor Page Operation Section Operation Operation Standard Equipment and SpecificationsPersonal Protective Equipment PPE Operator RequirementsRops and Seat Belt Tractor RequirementsOperator Thrown Object Protection Tractor Ballast Tractor Lighting and SMV EmblemHydraulics Tractor Safety DevicesTractor Horsepower 3-Point HitchPower Take Off PTO Front End WeightGetting on and OFF the Tractor Dismounting the Tractor Boarding the TractorStarting the Tractor Tractor Pre-Operation Inspection/Service PRE-OPERATION Inspection and ServiceBoom Unit Pre-Operation Inspection and Service Boom ARM Assembly Frame AssemblyHydraulic Line Inspection Hydraulic PUMP/OIL Reservoir Flail Head Inspection Sickle BAR Inspection Do not Operate an Unsafe Tractor or Mower Do not Operate an Unsafe Tractor or Implement Cable Controls Identification & Function Machine ControlsLever Functions Rotor Control With Slew selected BreakawayForward Speed Rotor Operating SpeedHigh Voltage Cables Hedge Cutting Procedure Working on Adverse Slopes Lift Float Kit OptionalDriving the Tractor and Implement Starting the Tractor Brake and Differential Lock SettingDriving the Tractor and Boom Operating the Tractor and ImplementForeign Debris Hazards Bystanders/Passersby PrecautionsEngaging the Power Take Off PTO Operating the Mower Operating Speed and Ground SpeedSGM-08 Grass Flail Operating the Attached Mower HeadsSickle Bar Shutting Down the Attached Head Transporting the Tractor and Implement TRACTOR, BOOM, and Attached Head StorageTransport Position Transport POSITION-Head Removal Transport POSITION-Head AttachedTransporting on Public Roadways Transport HeightOperation Operation Hauling the Tractor and Implement Trouble Possible Cause Possible Remedy Troubleshooting GuideOperation Page Maintenance Section General LubricationOil Supply Filtration MaintenanceHydraulic System Hydraulic HosesHose Warranty Hose ReplacementCables FlailheadPTO Gearbox Proper Torque Values for Fasteners Limited Warranty Required of the Operator Required of the OwnerRMB 1660 Rear Mount Boom Mower

RMB 1660 specifications

The Bush Hog RMB 1660 is a robust and versatile rotary mower that is designed for heavy-duty use in a variety of agricultural and landscaping applications. Known for its reliability and cutting efficiency, the RMB 1660 has gained a reputation among farmers, landscapers, and property owners alike. This rotary cutter is ideal for managing overgrown fields, clearing brush, and maintaining large properties with ease.

One of the standout features of the RMB 1660 is its impressive cutting capability. Equipped with a 60-inch cutting width, it allows operators to cover large areas quickly and efficiently. The cutting deck is constructed from high-quality steel, ensuring durability and resistance to wear and tear. This strong build also supports the mower's ability to tackle tough terrain and heavy grass.

The Bush Hog RMB 1660 is powered by a reliable and efficient engine that provides ample horsepower for even the most challenging mowing conditions. Its advanced driveline system delivers consistent power to the cutting deck, ensuring a clean and precise cut every time. The mower’s design also incorporates a balanced weight distribution, which enhances maneuverability and stability on uneven grounds.

Technologically, the RMB 1660 comes with several innovative features that enhance performance and ease of use. It includes adjustable cutting height capabilities, allowing operators to customize their mowing experience based on specific needs. The mower's simple height adjustment system makes it easy to switch between different grass lengths without the need for tools.

Safety is a paramount concern with the Bush Hog RMB 1660. The mower is designed with several safety features, including a safety chain that secures the mower to the tractor and a shield that protects the operator from flying debris. These features ensure a safer mowing experience, making it a reliable choice for users.

In addition to its impressive features, the RMB 1660 is designed for easy maintenance. Accessible grease points and easy-to-remove blades streamline maintenance tasks and minimize downtime, allowing users to focus on their trimming and mowing activities.

Overall, the Bush Hog RMB 1660 combines power, efficiency, and user-friendly features into a single package, making it an ideal choice for anyone seeking a reliable rotary mower capable of handling a variety of mowing tasks. Whether you are a commercial landscaper or a homeowner managing a large property, the RMB 1660 delivers exceptional performance, making it a valuable addition to any equipment lineup.
Top Page Image Contents