Briggs & Stratton 131F manual Replace the Fuse, Storage over 30 days

Page 28

Maintenance
	2	8
	1
1
1	4
1
		3
		6
	4
3
		5
	7	9

Figure 37

Replace the Fuse

If the fuse is blown, the engine will not start.

Remove the fuse and replace with a 15 amp automo- tive fuse.

Storage (over 30 days)

At the end of each year, prepare the unit for storage as follows.

1.Drain the fuel from the carburetor and the fuel tank. Change the engine oil. See the engine manufacturer’s instructions.

2.Clean the entire unit.

3.Charge the battery.

28

Image 28

Contents 13/30 Page Tabl e of Contents Safety Warning Pictorials Operation Pictorials International PictorialsIdentification Numbers CE Identification Tag MarkingsLimited Warranty Know Your Product Owner’s InformationResponsibility of the Owner Safe Operation Practices For Ride-On Riding Rotary Mower Ma- chines TrainingPreparation OperationMaintenance and Storage Assembly Install the Front WheelsInstall the Seat Assemble the Steering WheelAssembl e the Grass Bag Mount the Grass BagMaintenance Free Battery Assemble the Rear DeflectorCharge the Battery Install the Battery Cabl esCheck the L evel of the Mower Housing Check the TiresOperation Location of ControlsUse the Throttle Control Use the Blade Rotation ControlOperate with the Mower Housing Use the Parking BrakeChange the Cutting Height Stop the UnitClear the Connector Tube and the Extension Tube Operate on HillsUse the Grass Bagger Empty the Grass BaggerBefore Starting the Engine Start the EngineMowing and Bagging Tips Maintenance Chart Frequency Maintenance Required CommentsRemove and Install the Connector Tube General RecommendationsRemove and Install the Blade Inspect the BladeMaintenance Adjust the Blade Rotation ControlAdjust the Shift Lever Check and Adjust the ClutchCheck and Adjust the Drive Brake Remove the Battery Level the Mower Housing Where to LubricateCheck the Tires Replace the Motion Drive BeltRemove the Mower Housing Replace the Mower Drive BeltReplace the Fuse Storage over 30 daysOrder Replacement Parts Troubl eshooting Chart Hot engine causes a decrease in power When the clutch/brake pedal is released, belt Page Page