Briggs & Stratton 131F manual Assembl e the Grass Bag, Mount the Grass Bag

Assembly

7
4	(25x3)
6	(17x146)
1
3
2
	Figure 3

	4
3	2	1
		Figure 4

Assemble the Grass Bag

1.Slide the top tube (1) onto the wire frame (2) (see Figure 5). Make sure the handles (3) on the top tube and the wire frame are on top.

2.Attach the struts (4) to the INSIDE of the mounting tabs (5) with bolt (6) and nut (7). Make sure the head of bolt is on the outside and nut is locked against the strut.

3			1
		7
6	5
(1x121)
	4
	6	5	2
			6
	(1x121)
			Figure 5

3.Slide the frame assembly (8) into the grass bag

(9) (see Figure 6). Make sure the Velcro flap (10) is on top.

4.Open the Velcro flap (10) (see Figure 7). Slide the handle (3) through the opening and secure the Vel- cro flap under the handle.

5.Attach the clips (11) to the frame assembly (8).

10
9	8
	Figure 6

3	11
	8
	10
	9
	Figure 7

Mount the Grass Bag

1.To lift the grass bag assembly, use the grass bag handles (3) (see Figure 8).

2.Raise the rear bagger cover (16) away from the rear plate.

3.Mount the top of the grass bag assembly (12) onto the rear plate hinges (13) (see Figure 9).

4.When mounting the top of the grass bag (9), hold the bottom of the grass bag slightly away from the rear plate (14) (see Figure 8).

5.Lower the grass bag (9) until the bottom is against the rear plate (see Figure 10).

11