Bolens 13B-325-401 manual Operating Your Rider Mower

Page 11

SECTION 5: OPERATING YOUR RIDER MOWER

Using Throttle/Choke Control

The throttle/choke control is used to increase or decrease the speed of the engine.The FAST and the SLOW positions are marked with illustrations of a rabbit and a turtle respectively. See Figure 9.

For normal operation and when using a grass catcher, move the throttle/choke control to the FAST position.

For maximum charging of the battery and also for a cooler engine while running, move the throttle/ choke control to the FAST position.

For transport and to tow pull-behind attachments, move the throttle/choke control to the SLOW position.

Do not adjust the governor to increase or decrease the engine speed. The governor is set at the factory for maximum engine performance, and should not be altered.

Using Parking Brake

To engage parking brake

Completely push the brake pedal down and stop the unit.

With your right foot on the brake pedal, move the shift lever to the neutral position.

Continuing to hold down the brake pedal with your right foot, pull up the parking brake knob. Make sure the parking brake holds the unit.

Release the brake pedal. Stop the engine and remove the ignition key. Now your rider mower is parked.

To release the parking brake

Depress the brake pedal. The parking brake will be automatically disengaged.

Before Starting

Service the engine with gasoline as described in the engine manual. Check the oil level.

WARNING: Never fill fuel tank indoors, or when engine is running or hot. Do not smoke while filling up the gasoline tank.

Starting Engine

Attach the wire to the spark plug.

Depress the brake pedal with your right foot.

Set throttle/choke control in the CHOKE position (all the way forward).

Place the shift lever in the NEUTRAL position.

Turn the ignition key to the START position. As soon as the engine starts, let the key return to the ON position.

Move throttle/choke control out of CHOKE position and into FAST throttle position.

Starting Mower

Depress the brake pedal so that the parking brake is disengaged.

Place the shift lever in either the FORWARD or the REVERSE position as you desire. Look to the rear and check before backing up.

Release the brake pedal.

Depress the "Go" Pedal.

To stop, release the "Go" Pedal and depress the brake pedal.

Press the blade engagement pedal downward until the blades are turning.The blades can be engaged either while the mower is in motion or while it is standing.

NOTE: Your rider mower is equipped with a blade lock to keep the blade engaged without the operator having to depress the blade pedal continuously. See Figure 8.

To engage the blade lock: While pressing down on the blade pedal, push the blade lock down with your heel. It should click into the “blade engaged” position. To disengage the blade lock, simply push down on the blade pedal and release the lock.

WARNING: When the blades are engaged, keep hands and feet away from the discharge opening, the blades or any part of the deck.

Stopping Mower

Release blade engagement pedal all the way.

Release the "Go" Pedal and depress the brake pedal.

When the mower comes to a complete stop, place the shift lever in neutral.

Engage the parking brake by pulling up on the parking brake knob.

Turn ignition key to OFF position and remove key.

NOTE: Do not leave the key in the ON position when you are not operating the mower. Such action will drain the battery dead.

To Empty Grass Catcher

Stop the mower completely, pull up on the parking brake knob and take the ignition key out. Get off the operator’s seat.

11

Image 11
Contents Operator’s Manual Table of Contents Slope Operation Important Safe Operation PracticesGeneral Operation Children ServiceDo Not Tires and other harmful waste Slope Guage Attaching Side-Discharge Chute Attaching Battery CablesUnpacking & Assembling Your Rider Mower Loose PartsAttaching Hitch Plate If equipped Attaching Mulch PlugAttaching Bumper If equipped Know Your Rider Mower Stopping Mower Safety InterlockUsing Shift Lever Grass Fill Level IndicatorOperating Your Rider Mower Using The Mower Cutting Height Brake PedalGo Pedal Blade Brake/PTO Adjusting the DeckTest 1 Checking Rear Deck Height Adjustment Seat PositionFront to Rear Levelling Adjusting Rear Deck HeightTest 2 Checking Front to Rear Levelling Test 3 Checking Side to Side LevellingDeck Belt Fuse ReplacementBelt Replacement Servicing Your Rider MowerCutting Blade Maintaining Your Rider MowerGeneral Recommendations Lubrication Oil Drain SleeveEngine Fuel Filter Cleaning EngineTrouble Possible Cause Remedial Action TROUBLE-SHOOTINGCharge with 6 Amp. charger until fully Parts List for Series Model 320 Series Model 320 Series 4323 735-0261 2216 712-3010 Hex Nut 5/16-18 714-0115 Description 683-0147 2718 33 4 712-0267 List of color codes below. Please add Model 320 Series Spindle Assembly 683-0150C 11 26 Description Safety & Decorative Labels Your Notes MANUFACTURER’S Limited Warranty for

13B-325-401 specifications

The Bolens 13B-325-401 is a versatile riding lawnmower designed for homeowners who require reliable performance and ease of use in their lawn maintenance. This model, known for its powerful engine and user-friendly features, is tailored to handle a variety of landscaping tasks with precision.

At the heart of the Bolens 13B-325-401 is a robust 13.5 horsepower Briggs & Stratton engine. This engine provides ample power to tackle tough grass and uneven terrain, making it suitable for larger residential lawns. The engine is designed for easy starting, featuring a recoil system that ensures quick operation, reducing downtime and making yard work more efficient.

One of the standout features of the 13B-325-401 is its 42-inch cutting deck. This wide cutting area allows users to cover more ground in less time, and the precise design promotes an even cut across different grass types. The deck is equipped with adjustable cutting heights, allowing operators to customize the lawn cut to their desired level. With six different cutting positions, users can transition from a manicured look to a more natural finish depending on their landscaping needs.

The mower also includes a responsive hydrostatic transmission, which provides seamless speed control without the complications of manual shifting. This feature allows for effortless transitioning between forward and reverse, making maneuvering around obstacles like flower beds or trees much easier. The intuitive controls are strategically placed, ensuring that operators can adjust their speed and direction smoothly while maintaining a comfortable grip.

Durability is a key characteristic of the Bolens 13B-325-401. The heavy-duty steel frame is designed to withstand the rigors of regular use, ensuring longevity. Additionally, the mower’s compact design allows for easy storage, even in tight spaces.

User comfort has not been overlooked. The mower offers a plush seat that is adjustable, providing support during longer mowing sessions. The ergonomic steering wheel and dashboard layout improve the overall user experience, allowing for easy access to essential controls such as the ignition and throttle.

In summary, the Bolens 13B-325-401 combines power, efficiency, and comfort, making it an excellent choice for homeowners looking to simplify lawn care. Its advanced features, including a reliable engine, adjustable cutting deck, and user-friendly design, create a machine capable of maintaining beautiful lawns with confidence and ease.