Bolens 13B-325-401 manual Important Safe Operation Practices, General Operation, Slope Operation

Page 3

SECTION 1: IMPORTANT SAFE OPERATION PRACTICES

This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate your rider mower. Failure to comply with these instructions may result in personal injury. When you see this symbol— heed its warning.

Your rider mower was built to be operated according to the rules for safe operation in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury. If you violate any of these rules, you may cause serious injury to yourself or others.

WARNING: Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to State of California to cause cancer and birth defects or other reproductive harm.

General Operation

Read, understand, and follow all instructions in the manual and on the machine before starting. Keep this manual in a safe place for future and regular reference and for ordering replacement parts.

Only allow responsible individuals familiar with the instructions to operate the machine. Know controls and how to stop the machine quickly.

Do not put hands or feet under cutting deck or near rotating parts.

Clear the area of objects such as rocks, toys, wire, etc., which could be picked up and thrown by the blade. A small object may have been overlooked and could be accidentally thrown by the mower in any direction and cause injury to you or a bystander. To help avoid a thrown objects injury, keep children, bystanders and helpers at least 75 feet from the mower while it is in operation. Always wear safety glasses or safety goggles during operation or while performing an adjustment or repair, to protect eyes from foreign objects. Stop the blade(s) when crossing gravel drives, walks or roads.

Be sure the area is clear of other people before mowing. Stop machine if anyone enters the area. Never carry passengers.

Disengage blade(s) before shifting into reverse and backing up. Always look down and behind before and while backing.

Be aware of the mower and attachment discharge direction and do not point it at anyone. Do not operate the mower without either the entire grass catcher or the chute guard in place.

Slow down before turning. Operate the machine smoothly. Avoid erratic operation and excessive speed.

Never leave a running machine unattended. Always turn off blade(s), place transmission in neutral, set park brake, stop engine and remove key before dismounting.

Turn off blade(s) when not mowing.

Stop engine and wait until blade(s) comes to a complete stop before (a) removing grass catcher or unclogging chute, or (b) making any repairs, adjusting or removing any grass or debris.

Mow only in daylight or good artificial light.

Do not operate the machine while under the influence of alcohol or drugs.Watch for traffic when operating near or crossing roadways.

Use extra care when loading or unloading the machine into a trailer or truck. This unit should not be driven up or down a ramp onto a trailer or truck under power, because the unit could tip over, causing serious personal injury. The unit must be pushed manually on a ramp to load or unload properly.

Never make cutting height adjustment while engine is running, if operator must dismount to do so.

Wear sturdy, rough-soled work shoes and close- fitting slacks and shirts. Do not wear loose fitting clothes or jewelry. They can be caught in moving parts. Never operate a unit in bare feet, sandals, or sneakers.

Check overhead clearance carefully before driving under power lines, wires, bridges or low hanging tree branches, before entering or leaving buildings, or in any other situation where the operator may be struck or pulled from the unit, which could result in serious injury.

Disengage all attachment clutches, thoroughly depress the brake pedal, and shift into neutral before attempting to start engine.

Your mower is designed to cut normal residential grass of a height no more than 10". Do not attempt to mow through unusually tall, dry grass (e.g., pasture) or piles of dry leaves. Debris may build up on the mower deck or contact the engine exhaust presenting a potential fire hazard.

Slope Operation

Slopes are a major factor related to loss of control and tip-over accidents which can result in severe

3

Image 3
Contents Operator’s Manual Table of Contents Important Safe Operation Practices General OperationSlope Operation Service Do NotChildren Tires and other harmful waste Slope Guage Attaching Side-Discharge Chute Attaching Battery CablesUnpacking & Assembling Your Rider Mower Loose PartsAttaching Mulch Plug Attaching Bumper If equippedAttaching Hitch Plate If equipped Know Your Rider Mower Stopping Mower Safety InterlockUsing Shift Lever Grass Fill Level IndicatorOperating Your Rider Mower Using The Mower Brake Pedal Go PedalCutting Height Blade Brake/PTO Adjusting the DeckTest 1 Checking Rear Deck Height Adjustment Seat PositionFront to Rear Levelling Adjusting Rear Deck HeightTest 2 Checking Front to Rear Levelling Test 3 Checking Side to Side LevellingDeck Belt Fuse ReplacementBelt Replacement Servicing Your Rider MowerMaintaining Your Rider Mower General RecommendationsCutting Blade Oil Drain Sleeve EngineLubrication Fuel Filter Cleaning EngineTrouble Possible Cause Remedial Action TROUBLE-SHOOTINGCharge with 6 Amp. charger until fully Parts List for Series Model 320 Series Model 320 Series 4323 735-0261 2216 712-3010 Hex Nut 5/16-18 714-0115 Description 683-0147 2718 33 4 712-0267 List of color codes below. Please add Model 320 Series Spindle Assembly 683-0150C 11 26 Description Safety & Decorative Labels Your Notes MANUFACTURER’S Limited Warranty for

13B-325-401 specifications

The Bolens 13B-325-401 is a versatile riding lawnmower designed for homeowners who require reliable performance and ease of use in their lawn maintenance. This model, known for its powerful engine and user-friendly features, is tailored to handle a variety of landscaping tasks with precision.

At the heart of the Bolens 13B-325-401 is a robust 13.5 horsepower Briggs & Stratton engine. This engine provides ample power to tackle tough grass and uneven terrain, making it suitable for larger residential lawns. The engine is designed for easy starting, featuring a recoil system that ensures quick operation, reducing downtime and making yard work more efficient.

One of the standout features of the 13B-325-401 is its 42-inch cutting deck. This wide cutting area allows users to cover more ground in less time, and the precise design promotes an even cut across different grass types. The deck is equipped with adjustable cutting heights, allowing operators to customize the lawn cut to their desired level. With six different cutting positions, users can transition from a manicured look to a more natural finish depending on their landscaping needs.

The mower also includes a responsive hydrostatic transmission, which provides seamless speed control without the complications of manual shifting. This feature allows for effortless transitioning between forward and reverse, making maneuvering around obstacles like flower beds or trees much easier. The intuitive controls are strategically placed, ensuring that operators can adjust their speed and direction smoothly while maintaining a comfortable grip.

Durability is a key characteristic of the Bolens 13B-325-401. The heavy-duty steel frame is designed to withstand the rigors of regular use, ensuring longevity. Additionally, the mower’s compact design allows for easy storage, even in tight spaces.

User comfort has not been overlooked. The mower offers a plush seat that is adjustable, providing support during longer mowing sessions. The ergonomic steering wheel and dashboard layout improve the overall user experience, allowing for easy access to essential controls such as the ignition and throttle.

In summary, the Bolens 13B-325-401 combines power, efficiency, and comfort, making it an excellent choice for homeowners looking to simplify lawn care. Its advanced features, including a reliable engine, adjustable cutting deck, and user-friendly design, create a machine capable of maintaining beautiful lawns with confidence and ease.