Black & Decker PW1300TDW instruction manual Maintenance

Page 18

18 • ENGLISH

Use of extension cables: Use cables featuring “IPX5” protection level. The cross-section of the extension cable should be proportionate to its length; the longer it is, the greater its cross-section should be. See Fig. G.

Water supply connection

Caution! Only clean or teredwater should be used for intake. The delivery of the water intake tap should be equal to that of pump capacity. Place the appliance as close to the water supply system as possible.

Connection points:

Water outlet (OUTLET)

Water inlet with filter (INLET)

Connection to the mains water supply

The appliance can be connected directly to the mains drinking water supply only if the supply hose is fitted with a backflow preventer valve as per current regulations in force. Make sure that the hose is at least Ø13mm and that it is reinforced.

Connecting to the mains water system/water supply

Detergent flow is adjusted using the regulator.

Warning! Comply strictly with the technical regulations and standards of the local water supply company.

ff Ensure that the water mains connection complies with the data provided in the appliance’s technical specifications.

ff Connect the water supply hose (not supplied) to the appliance’s intake connection (Fig. C).

ff Turn on the water supply.

ff Vent the air from the appliance. To vent the air from the appliance, set the nozzle in low pressure mode (Fully forward) and press the trigger (First releasing the safety catch (10) if necessary) until the water which flows out is free from air bubbles. When done, return the nozzle to the high pressure setting.

appliance without water will damage it; do not cover the ventilation grilles when the appliance is in use.

1.Turn on the water supply tap fully.

2.Release the safety catch (10).

3.Depress the gun trigger for a few seconds and start up the appliance using the starter device (ON/I)(12a).

AS Models - In AS models with automatic delivery flow cut-o system:

a.When the gun trigger is released the dynamic pressure automatically cuts out the motor;

b.When the gun trigger is depressed the automatic drop in pressure starts the motor and the pressure is restored after a very slight delay;

c.If the AS is to function correctly all gun releasing and depressing operations must be performed at intervals of less than 4 - 5 seconds.

Note: To prevent damage to the appliance, when running do not stop the water jet for more than 10 minutes at a time.

Stopping the appliance (Fig. E)

1.Set the starter device switch on (OFF/0)(12b).

2.Depress the gun trigger and discharge the residual pressure inside the hoses.

3.Engage the gun safety catch (10).

Restarting

1.Release the safety catch (10).

2.Depress the gun trigger and discharge the residual air inside the hoses.

3.Set the starter device on (ON/I)(12a).

Storage

1.Switch the appliance off (OFF/0)(12b).

2.Remove the plug from the socket.

3.Turn o the water supply tap.

4.Discharge the residual pressure from the gun until all the water has come out of the nozzle.

5.Engage the gun safety catch (10).

USE OF THE APPLIANCE (Fig. E)

Starter device (12)

Set the starter switch on (ON/I) (12a) to:

a.Start the motor (In models without AS device);

b.Set the motor ready to start (In models with AS device). Note: If there is a pilot light on the starter device, it should light up.

Caution! During operation the appliance must be positioned as shown in Fig. E on a sturdy, stable surface.

Start-up (Fig. E)

MAINTENANCE

Important! To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (other than those listed in this manual) should be performed by authorized service centers or other qualified service personnel, always using identical replacement parts.

Caution! Always disconnect the plug from the power socket before carrying out any work on the appliance.

Cleaning the nozzle (Fig. F)

1.Disconnect the lance from the nozzle.

2.Remove any dirt deposits from the nozzle hole using

Caution! Before starting up the appliance check that

the tool (11).

the water supply hose is connected properly; use of the

 

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Manual DE Instrucciones Manual DE Instruções Appearance or specifications without notice FIG. aFIG. D FIG. F FIG. H Conserve Estas Instrucciones Normas Generales DE SeguridadUso previsto Informaciones TécnicasUsos no permitidos Partes Principales Fig. aEnlace hídrico MontajeEnlace eléctrico Enlace a la red hídrica públicaMantenimiento Protección DEL Medio AmbienteEspecificaciones PW1300TDW Inconvenientes Probables Causas Solución Guarde Estas Instruções Regras Gerais DE SegurançaInstruções de Segurança Componentes Principais Fig. a Informações técnicasUso Pretendido Uso inadequadoConexão para fornecimento de água MontagemConexão elétrica Informações DE USO Fig. E Dispositivo de partidaManutenção Proteção do Meio AmbienteInformações DE Serviço Especificações PW1300TDW Problema Possíveis Causas Soluções Somente versões com desligamentoGeneral power tool safety warnings General Safety RulesSafety Instructions Safety MustsEnvisaged use AssemblyTechnical Information Main components Fig. aMaintenance End-of-season storage Cleaning the filter Fig. HService Information Specifications PW1300TDW Protecting the EnvironmentProblem Possible Causes Solution AS versions only Motor startsPWA001 Lanza Rotatoria / Lança Turbo / Rotary Lance PWA004 Impreso en China Impresso em China 92077 07/17/12

PW1300TDW specifications

The Black & Decker PW1300TDW is a powerful and versatile electric pressure washer designed for both heavy-duty cleaning tasks and everyday maintenance around the home. With its compact size and innovative features, this pressure washer is ideal for tackling various surfaces, including driveways, patios, vehicles, and outdoor furniture.

One of the standout features of the PW1300TDW is its robust 1300 watt motor, which provides a maximum pressure of 130 bar. This impressive power allows users to effectively remove dirt, grime, and stains from various surfaces with ease. The machine's adjustable nozzle enables users to customize the spray patterns, providing versatility for different cleaning tasks, such as wide spray for delicate surfaces or a focused jet for stubborn stains.

The lightweight and portable design of the PW1300TDW enhances its usability, making it easy to transport from one cleaning job to another. The integrated wheels and ergonomic handle allow for effortless maneuverability. Additionally, the power washer comes equipped with a 5-meter high-pressure hose, facilitating extended reach without the need to frequently change power sources.

Another important feature is the built-in detergent tank. This enables users to effortlessly apply cleaning solutions while pressure washing, enhancing the machine's ability to tackle grease and tough stains. The detergent is dispensed at a controlled rate, ensuring efficient use and even application.

Safety is also a priority with the Black & Decker PW1300TDW. It features a safety lock mechanism on the trigger gun to prevent accidental activation, making it a suitable choice for families. Furthermore, it has an automatic shut-off feature that activates when the trigger is not engaged, helping to conserve energy and prolong the life of the motor.

In terms of build quality, the PW1300TDW is designed with a high-quality plastic casing that ensures longevity while remaining lightweight. Its compact design allows for easy storage in small spaces.

Overall, the Black & Decker PW1300TDW pressure washer combines power, efficiency, and safety into a well-engineered tool that is perfect for anyone looking to keep their outdoor spaces clean and well-maintained. With its combination of features and functionalities, it stands out as a reliable solution for both light and heavy-duty cleaning tasks.
Top Page Image Contents