SYMBOLS & LABELS | 853PRO OPERATOR’S MANUAL |
|
|
THE FOLLOWING SYMBOLS AND DEFINITIONS ARE FOUND THROUGHOUT THIS MANUAL
AND ARE DESIGNED TO MAKE YOU AWARE OF POTENTIAL HAZARDS OR UNSAFE
PRACTICES.
WARNING
CAUTION
IMPORTANT
A potentially hazardous situation exists which, if not avoided, could result in death or serious injury.
A potentially hazardous situation exists which, if not avoided, may result in minor or moderate injury or property damage.
A potential situation exists which, if not avoided, may result in product or property damage.
THE FOLLOWING SYMBOLS & LABELS MAY BE FOUND IN THIS MANUAL OR ON THE SAW
Read the operator’s manual carefully and understand the contents before you use this equipment.
Always use:
• Protective helmet
• Ear protection
• Protective glasses or full face protection
Wear hand protection
�WARNING
•Do not exceed the hydraulic flow recommended for your saw model: 8 gpm, (30 lpm) or 12 gpm (45 lpm) at 2,500 psi (172.5 bar) hydraulic pressure
•Minimum water pressure 20 psi (1.5 bar)
•Weight 23 lbs (10.4 kg) w/out bar and chain
•Inserting the tool into a
•Always operate tool with solid footing and firm hand grip
•Contact at a hydraulic leak or burst can cause oil injection into the body
READ OPERATIONS & MAINTENANCE MANUAL BEFORE USE OF TOOL. FAILURE TO OBSERVE THESE PRECAUTIONS CAN RESULT IN SERIOUS PERSONAL INJURY
4 | © 2008 ICS, Blount International Inc. Specifications are subject to change without notice. REV0708 F/N 71904 |