LightSpeed Technologies Delta X10 Speaker Standtripod, Speaker Stand Tripod, Mounting the Delta

System Installation

Speaker Stand(tripod)

1

Locking

Knob

2

Safety

Pin

Locking

Knob

SPEAKER STAND (TRIPOD)

1.Extending the Legs: Loosen the lower knob and pull outward on two legs of the tripod. Extend the legs until the center post is just above the floor. The center post should NOT touch the floor. Tighten the lower knob.

2.Extending the Center Post: Loosen the upper knob and pull the center post up to the desired height. There are eight thru-holes in the center post. Locate the thru-hole nearest to the collar and insert the safety pin in that hole. Lower the center post until the safety pin sits on the collar. Tighten the upper knob.

3.Mounting the Delta X:

WARNING: Safe handling of this system requires two people.

For safety, two people are required to mount the Delta X system on the tripod. Lift the Delta X system above the top of the center post. Align the mounting hole with the center post of the tripod and carefully lower the Delta X system onto it.

3

Tripod Mount

Bottom View of

Delta X10

LightSPEED Technologies • Wireless Sound Solutions • Toll Free: 1-800-840-3662 9