Operating Instructions
Wireless Transmitter
Handheld Microphone
Sensitivity Level
This function allows the user to set the gain structure of the microphone to best fit the voice level of the person speaking into it. A person with a very loud, booming voice may want the microphone set to a sensitivity level of 1 or 2. A person with a very soft voice will be better off with the microphone set to a sensitivity of 3 or 4.
To change the sensitivity setting:
• Press the “UP” button 3 times to get to the Sensitivity Level screen.
SENS SET | LOCK |
|
LOCK | SET | |
LEVEL [2] | DOWN |
|
|
| |
| ||
SET
UP
•Press and hold the “SET” button until ablinking cursor appears.
•Use the “UP” and “DOWN” arrows to make a selection
•Press and hold the “SET” button again until the blinking cursor disappears.
LightSPEED
Handheld Microphone
End View
Battery Life Indicator
The battery life is shown on the primary screen of the LCD. The
CH: 002
Battery Type
The transmitter will operate with either standard Alkaline Batteries or Nickel Metal Hydride (NiMH) Rechargable Batteries. Since these types of batteries have different characteristics, it is important to set the transmitter to the appropriate type of battery being used so that the battery life indicator will operate properly.
NOTE: Do not mix battery types.
WARNING: Do not use NiCad batteries! They will not charge properly and may cause damage to the transmitter.
To Change the Battery Type Setting:
• Press the “UP” button |
|
twice to get to the | NiMH |
AKLN | |
|
•Press and hold the “SET” button until a blinking cursor appears.
LOCK
DOWN
SET
LOCK | SET | LOCK | SET |
UP |
•Use the “UP” and “DOWN” arrows to make a selection.
•Press and hold the “SET” button again until the blinking cursor disappears.
Handheld Microphone | Rotate Disc to Secure |
End View | Controls |
LightSPEED Technologies • Wireless Sound Solutions • Toll Free: | 21 |