Operating Instructions
Wireless Transmitter
Handheld Microphone
Channel Selection – Handheld Transmitter
Once a channel has been selected on the receiver, you now need to select that same channel on the handheld transmitter. If you have a
•Turn the microphone on by sliding the switch on the barrel to the ON position. The red LED will flash once.
•Use the “up” and “down” buttons to select a screen that shows the current channel.
•To change the channel, press and hold the “SET” button on the bottom of the microphone until there is a blinking cursor on the LCD display
window (approximately 3 seconds).
Setup Screens |
| ||||||||||||||||
selectable with | NiMH | ||||||||||||||||
the UP and DOWN | AKLN | ||||||||||||||||
| Arrow Buttons |
| |||||||||||||||
|
|
| CH: 002 | SENS SET | |||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| LEVEL [2] |
|
| CH: 002 | LS | ||||||||||||||
| 720.500M | ||||||||||||||||
NOTE: Transmitters and receivers are available in 5 different frequency groups. Verify that the letter code that blinks on the receiver (when powered ON) matches the letter code on the frequency sticker in the battery compartment of the transmitter.
LOCK 
SET
LOCK SET
DOWN | UP |
•Use the “UP” and “DOWN” buttons to set the channel to match the receiver.
•Press and hold the “SET” button again until the blinking cursor disappears and the red LED flashes (approximately 3 seconds).
Red
LED
ON/OFF Switch
ON
LCD Display
Transmission Frequency in MHz: Press the “UP”
button once to view the transmission frequency in CH: 002
720.500M
MHz of the currently selected channel.
Lock Function
This allows users to lock out all the controls on the microphone so that it is not accidentally switched off or the channels aren’t accidentally changed in the middle of a performance.
To lock all the controls:
•Press the “LOCK” button on the bottom of the microphone. A lock icon will appear on the LCD screen next to the channel number.
CH: 002
LOCK SET
LightSPEED
Rotate Disc to Secure
Controls
•The black (or colored) disc on the bottom can be rotated around to completely cover the controls so that the buttons cannot be accidentally pressed again.
To unlock all the controls:
•Rotate the black (or colored) disc back around to reveal the buttons on the bottom of the microphone.
•Press the “LOCK” button again to unlock. The lock icon will disappear.
LightSPEED Technologies • Wireless Sound Solutions • Toll Free: | 20 |