Stop engine, remove key, read manual before making any repairs, adjustments.
OL4010
Wear appropriate hearing protection.
OL4690
3. DANGER!
ROTATING PARTS! Stop engine and remove key before clearing.
High speed impeller rotates
below discharge opening. Wait
for all moving parts to stop
OS2070 before removing clogs or servicing.
4. HOT SURFACES!
DO NOT touch parts which are hot from operation. ALWAYS allow parts to cool.
OL4340
ASSEMBLY SAFETY RULES
Read, understand, and follow all safety practices in Owner/Operator Manual before beginning assembly. Failure to follow instructions could result in personal injury and/ or damage to unit.
ALWAYS remove key and/or wire from spark plug before assembly. Unintentional engine start up can cause death or serious injury.
OPERATIONAL SAFETY RULES
Walk Around Inspection
Complete a walk around inspection of unit and work area to understand:
• Work area • Your unit • All safety decals
Work Area
ALWAYS check overhead and side clearances carefully before operation. ALWAYS be aware of traffic when operating along streets or curbs.
Keep children and people away. Keep children out of work area and under watchful care of a responsible adult.
NEVER allow children to operate or play on or near unit. Be alert and shut off unit if children enter area.
DO NOT allow adults to operate unit without proper training.
Keep area of operation clear of all toys, pets, and debris. Thrown objects can cause injury.
Check for weak spots on dock, ramps or
floors. Avoid uneven work areas and rough terrain. Stay alert for hidden hazards.
Avoid uneven and rough terrain. DO NOT operate near drop offs, ditches, or embankments. Unit can suddenly turn over if a wheel is over the edge of a cliff or ditch, or if an edge caves in.
Falling snow, fog, etc. can reduce vision and cause an accident. Operate unit only when there is good visibility and light.
Personal Safety
Only trained adults may operate unit. Training includes actual operation.
NEVER operate unit after or during the use of medication, drugs or alcohol. Safe operation requires your complete and unimpaired attention at all times.
NEVER allow anyone to operate this unit when their alertness or coordination is impaired.
DO NOT operate unit without wearing adequate winter outer garments. Wear adequate safety gear, including safety glasses with side shields, and protective gloves. Wear proper footwear to improve footing on slippery surfaces.
DO NOT wear loose clothing or jewelry and tie back hair that may get caught in rotating parts.
Protect eyes, face and head from objects that may be thrown from unit. Wear appropriate hearing protection.
Avoid sharp edges. Sharp edges can cut. Moving parts can cut off fingers or a hand.
ALWAYS keep hands and feet away from all rotating parts during operation. Rotating parts can cut off body parts.
ALWAYS keep hands away from all pinch points.
DO NOT touch unit parts which might be hot from operation. Allow parts to cool before attempting to maintain, adjust or service.
NEVER place your hands or any part of your body or clothing inside or near any moving part while unit is running.
GB - 9