AeroGarden 100710-BSS, PRO100 quick start Replanting Your AeroGarden

Page 15

Prepare For Your Next Garden (continued)

Replanting Your AeroGarden

If you have already grown a garden in your AeroGarden PRO100, please follow the instructions below to reset the nutrient timer:

•Press and hold “Reset” button until red “Add Nutrient” light blinks 3 or 4 times (about 9 seconds).

•Release “Reset” button. “Add Nutrient” light will turn off.

•Your AeroGarden is now reset. (In some cases you may see other lights blink as well. This is nothing to worry about.)

NOTE: These steps do not reset grow bulb timer.

Reset

Add Nutrient

Remember to...

•Replace Grow Bulbs after 6 months of use. Grow Bulbs can be ordered at www.aerogardensupport.com or from your retailer.

•Sanitize AeroGarden PRO100 before replanting (see page 13).

•Set your Lamp Hood to lowest position when starting a new garden.

!Bundle cord when furnishing is not in use.

14

Image 15

Contents Simple Steps Important Safety Instructions PRO100 Into Base Quick Start Assembly No tools requiredSet Bowl into Base Quick Start AssemblyAway From Place Your GardenAdd Water Using a Spouted Container Planting Your GardenPlant Your Garden Add Starting Nutrient Tablets and Record Planting Date Place Bio-Domeson Seed PodsPlug Cord into Electrical Outlet What will happen Starting Your GardenYour Light Timer Select SettingSimple Steps Personalize Your Light Timer optionalAeroGarden PRO100 24-Hour Light Setting Personalize Your Light TimerAeroGarden PRO100 Control Panel Basic Reminders About Your AeroGardenBasic Reminders About Your AeroGarden Prepare For Your Next Garden Replanting Your AeroGarden PRO100