
Cleaning and Maintenance
based wax that is specifically formulated to protect the spa’s finish from the chemicals and minerals associated with normal spa use.
The most effective solution to minimize cleaning time is prevention. When the following steps are followed, the spa’s finish will actually start to resist most of the elements that cause calcium
Prior to Spa Start-Up and Refilling
1.Spray Cal Spas™
2.Wipe clean with a soft cloth.
3.Repeat on heavily calcified areas.
4.Wipe spa thoroughly with a wet sponge, rinsing often in a bucket of clean water.
5.Allow the spa to dry completely.
6.Apply a coat of Cal Spas™ Fast Sheen to the spa’s entire finish with a soft cloth or sponge.
7.Allow Fast Sheen to dry until white and powdery.
8.Buff clean with a soft cloth, rotating frequently.
IMPORTANT: Cal Spas™ Fast Sheen should not be used on spas full of water. Only apply to clean, cool, dry surfaces. Incorrect product usage may cause water clarity issues.
the flow of water goes through the filter, dirt and debris is removed and accumulated in the filter cartridge. As the filter cartridge accumulates dirt and debris, water flow is restricted and jet performance is reduced. This can cause your spa to not run or heat effectively.
Clean your filter regularly and replace as needed.
Filter Cleaning
Your new spa has been designed for quick and easy filter maintenance. The filter cartridge should be cleaned once a week. These instructions apply to both dual and single filtration systems.
1.Turn the power off at the breaker.
2.Remove the filter by turning it counterclockwise and unscrewing the bottom threads. Then pull it up and out.
3.Clean the filter with a garden hose as follows:
a.Hold the filter vertically.
b.Spray the filter cartridges with a pressure nozzle, starting from the top and spraying down each pleat.
c.Turn the filter cartridge over and repeat Step
3b.
d.Deep clean filter cartridge every month. Use only a Cal
Cleaning and Replacing the Filter
Filtration
Filtration is one of the most important steps you can take to ensure clean, clear water. Regardless of what some people may think, it is far less expensive to fix water clarity problems by filtering your spa than by using excessive amounts of chemicals, excessive filtration times, or by water replacement.
Cal Spas™ filtration system draws contaminated water through the exclusive
Filtration starts on electronically controlled spas as soon as the pumps are primed and water flow is steady. As
Exclusive Bio-Clean™ Filter Cartridge
The filter cartridge is designed to remove dirt, sand, minerals, phosphates, bather waste and other solids from the spa. Unfortunately, some spa owners fail to include filter cleaning as part of their chemical maintenance plan. Filters accumulate debris and become prime areas for bacteria growth.
The Cal Spas™ exclusive
2008 Portable Spa Owner’s Manual | Page 31 |
LTR20081000, Rev. B