Sanitation
After you fill your spa, you need to decide which chemical sanitizer you wish to use. Consult your Cal Spas dealer for the right decision with regards to your lifestyle and spa usage.
We recommend either bromine or chlorine as your sanitizer. Both work well when maintained regularly.
DO NOT use trichlor.. Trichlor is very acidic and the hot temperature of the spa causes it to dissolve too quickly.. It will cause damage to your spa and will void your warranty..
Sanitizers kill bacteria and other organic waste by breaking them down to
Make sure you follow all instructions and use only Cal Spas brand chemicals.
Whichever plan you decide on, follow it completely and don’t take shortcuts. It will provide you with clean, safe, clear spa water with a minimum of effort. Spa owners with the Cal Zone Quest ozonator still need to use a chemical sanitizer. See page 30 for instructions on usage.
Using Chlorine as a Sanitizer
If you choose to use chlorine as a sanitizer, only use granulated chlorine, not liquid chlorine. We recommend you use only Cal Spas “Chlorinating Granules”.
Once a week, check the chlorine level using either a test strip or a reagent kit. See the table on the following page for the ideal range.
Add one or two tablespoons of Cal Spas “Chlorinating Granules” to the spa water weekly. Note that chlorine dissipation rate will be faster at higher water temperatures and slower at lower temperatures.
When you add chlorine, open all of the jets and run the spa at high speed with the cover open for at least 30 minutes.
Follow the maintenance schedule on page 29.
25
Clear Water Plan
Using Bromine as a Sanitizer
Bromine is a very effective sanitizer that produces low chemi- cal odors. Unlike chlorine, it can break down bacteria and other impurities to a safe level with a low
Bromine is available in both granulated and tablet form. Use granulated bromine to establish your bromine base. Use tab- lets to maintain it. The filter cartridge provided with your spa has an internal chamber for bromine tablets. Do not use a floater.
When you begin with fresh water, add 2 ounces of Cal Spas Go Brom. Open all of the jets and run the spa at high speed. This is your base bromine level as the tablets will take a while to dissolve.
Add two ounces of Oxidizer Shock. Open all of the jets and run on high speed with the cover half open for at least 30 minutes.
Place three or four bromine tablets in the chamber inside the filter cartridge.
Follow the maintenance schedule on page 29.
2009 Inground Spas
Adding Sanitizer Tablets to the Chemical Chamber
LTR20091002, Rev. B | www.calspas.com |