Exmark CD42CD, Cd42cd, Cd48cd Maintenance & Adjustments, Deck Removal, Deck Spring Installation

Page 11

FIGURE 5

DECK SPRING INSTALLATION

h)Un-latch deck from raised position, slowly lower deck to ground and lock deck locking pins on each side per section 4.1.2, Lowering the Deck to the Operation Position.

3.4DECK REMOVAL

a)Stop engine, wait for all moving parts to stop, and remove key.

b)Raise mower deck up and latch with deck locking pins per section 4.1.1, Raising the Mower Deck to the Service Position.

c)Remove hairpins and washers at the top of the deck lift assist spring on each side of the unit. See Figure 5.

d)Remove the spring from the spring anchor. Repeat for other side of unit.

e)Un-latch deck from raised position and slowly lower deck to ground per section 4.1.2, Lowering the Mower Deck to the Operation Position.

NOTE: Deck will become heavier once springs are removed from the anchors. Lower deck carefully.

f)Remove lynch pins at front of push arms on both sides of the unit. See Figure 3.

g)Remove hairpin and clevis from both sides of the PTO guard. See Figure 4.

h)Raise seat and disconnect drive shaft using quick coupler at jackshaft. See Figure 2.

i)Pull mower deck forward to remove from unit.

4.MAINTENANCE & ADJUSTMENTS

WARNING

POTENTIAL HAZARD

♦While maintenance or adjustments are being made, someone could start the engine.

WHAT CAN HAPPEN

♦Accidental starting of the engine could seriously injure you or other bystanders.

HOW TO AVOID THE HAZARD

♦Remove the key from the ignition switch and pull the wire(s) off the spark plug(s) before you do any maintenance. Also push the wire(s) aside so it does not accidentally contact the spark plug(s).

6

Page 10 Page 12
Image 11
Page 10 Page 12
Contents For Serial Nos 510,000 & Higher Effective Date September 1 Program Exmark Parts PLUS→ ProgramPotential Hazard Operators Manual Table of Contents Training SafetyYour Safety is Involved Safety Alert SymbolOperation Maintenance and StorageSafety Signs Page Assembly Instructions SpecificationsJackshaft and Drive Shaft Connection Push ARM InstallationPTO Guard Installation Deck Removal Maintenance & AdjustmentsDeck Spring Installation Raising the Deck Deck Raising and LoweringService Interval Daily Periodic MaintenanceService Interval Refer to chart Blade Bolt InstallationService Interval Once Yearly Grease Fitting Lubrication ChartGearbox OIL Drain Locations AdjustmentsDeck Locking PIN Adjustment Deck Support PIN AssemblyCaster Adjustment Deck Group Parts ListDeck Group Front Frame Group Front Frame Group Gearbox Components for 103-3460 Year Limited Warranty Walk Behind Accessories Riding Accessories

CD42CD, Cd42cd, Cd48cd specifications

The Exmark CD42CD and CD48CD series stand out in the mowing equipment market, designed specifically for commercial landscaping professionals seeking efficiency and performance. These zero-turn mowers encapsulate advanced technologies and features that deliver a superior mowing experience.

One of the primary features of the CD42CD and CD48CD models is their powerful engines. These mowers are equipped with robust, gasoline-powered engines that provide ample horsepower, ensuring they can tackle even the toughest grass and terrain with ease. The mowers’ compact design, particularly the 42-inch and 48-inch cutting decks, allows for impressive maneuverability, making them ideal for tight spaces and intricate landscaping tasks.

The cutting decks of the Exmark CD series are crafted for precision. With a deep design, these decks enable efficient airflow, ensuring that grass is cut evenly and finely. Users appreciate the enhanced cut quality, which not only provides a more aesthetically pleasing lawn but also promotes healthier grass growth. The cutting heights are adjustable, allowing operators to achieve their desired length for various grass types and conditions.

Another significant technology embedded in the Exmark CD series is the patented Innovate technology, which improves both the efficiency of the mower and the ease of operation. This technology allows for smoother handling and better traction, leading to reduced overall fuel consumption. Moreover, the ergonomic controls make it easier for operators to navigate with precision.

In terms of durability, the Exmark CD series is built with rugged components that withstand the demands of daily commercial use. The frame is robust, and the wheels are designed for optimal stability and traction, contributing to a long service life.

Comfort is also a priority in the CD42CD and CD48CD models. The operator’s seat is designed for long hours of use, featuring ample cushioning and support. Adjustable armrests and controls align with the operator's body, minimizing fatigue during extensive mowing sessions.

In summary, the Exmark CD42CD and CD48CD are a testament to innovative design in landscape maintenance equipment. Their powerful performance, cutting-edge technology, and user-oriented features further solidify their reputation as reliable tools for professional landscapers aiming to enhance productivity and achieve exceptional results in their mowing tasks.
Top Page Image Contents