Exmark CD42CD, Cd42cd, Cd48cd manual Operation, Maintenance and Storage, Safety Signs

Page 7

1.3.3While mowing, always wear substantial footwear and long trousers. Do not operate equipment when barefoot or when wearing open sandals.

1.3.4Thoroughly inspect the area where the equipment is to be used and remove all stones, sticks, wires, bones, and other foreign objects which may damage the equipment or cause personal injury to the operator or bystanders.

1.4OPERATION

Although hazard control and accident prevention are partially dependent upon the design and configuration of the equipment, these factors are also dependent upon the awareness, concern, prudence, and proper training of the personnel involved in the operation, transport, maintenance, and storage of the equipment. It is essential that all Operator Safety Mechanisms be connected and in operating condition prior to use for mowing.

WARNING

POTENTIAL HAZARD

♦Hands, feet, hair, clothing, or accessories can become entangled in rotating parts.

WHAT CAN HAPPEN

♦Contact with rotating parts can cause traumatic amputation or severe lacerations.

HOW TO AVOID THE HAZARD

♦Do not operate the machine without guards, shields, and safety devices in place and working.

♦Keep hands, feet, hair, jewelry, or clothing away from rotating parts.

1.4.1Give complete, undivided attention to the job at hand.

1.4.2Mow only in daylight or good artificial light, keeping away from holes and hidden hazards. NEVER carry passengers.

1.4.3Use EXTREME caution when backing up. LOOK BEHIND YOU!

1.4.4Stop the blades when crossing surfaces other than grass and when transporting the mower to and from the area to be mowed.

1.4.5Never operate the mower with damaged guards, shields, or covers. Always have safety shields, guards, switches, and other devices in place and in proper working condition.

1.5MAINTENANCE AND STORAGE

1.5.1Check all bolts frequently to maintain proper tightness.

1.5.2Keep all guards, shields, and all safety devices in place and in safe working condition.

1.5.3Frequently check for worn or deteriorating components that could create a hazard.

1.5.4All replacement parts must be the same as or equivalent to the parts supplied as original equipment.

1.6SAFETY SIGNS

1.6.1Keep all safety signs legible. Remove all grease, dirt and debris from safety signs and instructional labels.

1.6.2Safety signs must be replaced if they are missing or illegible.

1.6.3When new components are installed, be sure that current safety signs are affixed to the replaced components.

1.6.4New safety signs may be obtained from Exmark Mfg. Co. Inc.

2

Page 6 Page 8
Image 7
Page 6 Page 8
Contents For Serial Nos 510,000 & Higher Effective Date September 1 Program Exmark Parts PLUS→ ProgramPotential Hazard Operators Manual Table of Contents Training SafetyYour Safety is Involved Safety Alert SymbolSafety Signs Maintenance and StorageOperation Page Assembly Instructions SpecificationsPTO Guard Installation Push ARM InstallationJackshaft and Drive Shaft Connection Deck Spring Installation Maintenance & AdjustmentsDeck Removal Raising the Deck Deck Raising and LoweringService Interval Daily Periodic MaintenanceService Interval Refer to chart Blade Bolt InstallationService Interval Once Yearly Grease Fitting Lubrication ChartGearbox OIL Drain Locations AdjustmentsCaster Adjustment Deck Support PIN AssemblyDeck Locking PIN Adjustment Deck Group Parts ListDeck Group Front Frame Group Front Frame Group Gearbox Components for 103-3460 Year Limited Warranty Walk Behind Accessories Riding Accessories

CD42CD, Cd42cd, Cd48cd specifications

The Exmark CD42CD and CD48CD series stand out in the mowing equipment market, designed specifically for commercial landscaping professionals seeking efficiency and performance. These zero-turn mowers encapsulate advanced technologies and features that deliver a superior mowing experience.

One of the primary features of the CD42CD and CD48CD models is their powerful engines. These mowers are equipped with robust, gasoline-powered engines that provide ample horsepower, ensuring they can tackle even the toughest grass and terrain with ease. The mowers’ compact design, particularly the 42-inch and 48-inch cutting decks, allows for impressive maneuverability, making them ideal for tight spaces and intricate landscaping tasks.

The cutting decks of the Exmark CD series are crafted for precision. With a deep design, these decks enable efficient airflow, ensuring that grass is cut evenly and finely. Users appreciate the enhanced cut quality, which not only provides a more aesthetically pleasing lawn but also promotes healthier grass growth. The cutting heights are adjustable, allowing operators to achieve their desired length for various grass types and conditions.

Another significant technology embedded in the Exmark CD series is the patented Innovate technology, which improves both the efficiency of the mower and the ease of operation. This technology allows for smoother handling and better traction, leading to reduced overall fuel consumption. Moreover, the ergonomic controls make it easier for operators to navigate with precision.

In terms of durability, the Exmark CD series is built with rugged components that withstand the demands of daily commercial use. The frame is robust, and the wheels are designed for optimal stability and traction, contributing to a long service life.

Comfort is also a priority in the CD42CD and CD48CD models. The operator’s seat is designed for long hours of use, featuring ample cushioning and support. Adjustable armrests and controls align with the operator's body, minimizing fatigue during extensive mowing sessions.

In summary, the Exmark CD42CD and CD48CD are a testament to innovative design in landscape maintenance equipment. Their powerful performance, cutting-edge technology, and user-oriented features further solidify their reputation as reliable tools for professional landscapers aiming to enhance productivity and achieve exceptional results in their mowing tasks.
Top Page Image Contents