Exmark CD42CD, Cd42cd, Cd48cd manual Periodic Maintenance, Service Interval Daily

Page 13

b)Push deck locking pins inward and rotate forward to securely lock deck in lowered position. See Figure 6.

WARNING

POTENTIAL HAZARD

♦Operating mower without locking pins securely latched can result in the mower deck folding up unexpectedly.

WHAT CAN HAPPEN

♦The mower deck folding up unexpectedly can cause serious injury.

HOW TO AVOID THE HAZARD

♦Always operate mower with locking pins securely latched.

4.2PERIODIC MAINTENANCE

4.2.1Clean grass build-up under deck.

Service Interval: Daily

a)Stop engine, wait for all moving parts to stop, and remove key.

b)Raise mower deck and secure in latched position. See section 4.1.1, Raising the Mower Deck to the Service Position.

c)Clean out any grass build-up from underside of deck and in discharge chute.

d)Lower deck to cutting position and lock deck locking pins. See section 4.1.2, Lowering the Mower Deck to the Operation Position.

4.2.2Check mower blades.

Service Interval: Daily

a)Stop engine, wait for all moving parts to stop, and remove key.

b)Lift deck and secure in raised position as stated in Section 4.1.1, Raising the Mower Deck to the Service Position.

c)Inspect blades and sharpen or replace as required.

d)To remove blade, use a block of wood or locking pliers to hold blade in place and remove the 1/2-20 x 2 1/4 blade bolt that secures the blade and blade driver.

e)If blade is worn or damaged, remove the shear pins that secure the blade driver to the blade. Re-install a new blade to the blade driver and secure with the shear pins.

f)Re-install the blade driver (with new blades) by using a block of wood or locking pliers to hold the blade in place and torque the blade bolts to 85-110 ft-lbs. (115- 149 N-m).

NOTE: Blade driver flats must be aligned with the flats on the shaft when installing blade on the mower deck.

g)Lower the mower deck to the operation position. See section 4.1.2, Lowering the Mower Deck to the Operation Position.

8

Page 12 Page 14
Image 13
Page 12 Page 14
Contents For Serial Nos 510,000 & Higher Effective Date September 1 Program Exmark Parts PLUS→ ProgramPotential Hazard Operators Manual Table of Contents Your Safety is Involved SafetySafety Alert Symbol TrainingSafety Signs Maintenance and StorageOperation Page Assembly Instructions SpecificationsPTO Guard Installation Push ARM InstallationJackshaft and Drive Shaft Connection Deck Spring Installation Maintenance & AdjustmentsDeck Removal Raising the Deck Deck Raising and LoweringService Interval Daily Periodic MaintenanceService Interval Refer to chart Blade Bolt InstallationService Interval Once Yearly Grease Fitting Lubrication ChartGearbox OIL Drain Locations AdjustmentsCaster Adjustment Deck Support PIN AssemblyDeck Locking PIN Adjustment Deck Group Parts ListDeck Group Front Frame Group Front Frame Group Gearbox Components for 103-3460 Year Limited Warranty Walk Behind Accessories Riding Accessories

CD42CD, Cd42cd, Cd48cd specifications

The Exmark CD42CD and CD48CD series stand out in the mowing equipment market, designed specifically for commercial landscaping professionals seeking efficiency and performance. These zero-turn mowers encapsulate advanced technologies and features that deliver a superior mowing experience.

One of the primary features of the CD42CD and CD48CD models is their powerful engines. These mowers are equipped with robust, gasoline-powered engines that provide ample horsepower, ensuring they can tackle even the toughest grass and terrain with ease. The mowers’ compact design, particularly the 42-inch and 48-inch cutting decks, allows for impressive maneuverability, making them ideal for tight spaces and intricate landscaping tasks.

The cutting decks of the Exmark CD series are crafted for precision. With a deep design, these decks enable efficient airflow, ensuring that grass is cut evenly and finely. Users appreciate the enhanced cut quality, which not only provides a more aesthetically pleasing lawn but also promotes healthier grass growth. The cutting heights are adjustable, allowing operators to achieve their desired length for various grass types and conditions.

Another significant technology embedded in the Exmark CD series is the patented Innovate technology, which improves both the efficiency of the mower and the ease of operation. This technology allows for smoother handling and better traction, leading to reduced overall fuel consumption. Moreover, the ergonomic controls make it easier for operators to navigate with precision.

In terms of durability, the Exmark CD series is built with rugged components that withstand the demands of daily commercial use. The frame is robust, and the wheels are designed for optimal stability and traction, contributing to a long service life.

Comfort is also a priority in the CD42CD and CD48CD models. The operator’s seat is designed for long hours of use, featuring ample cushioning and support. Adjustable armrests and controls align with the operator's body, minimizing fatigue during extensive mowing sessions.

In summary, the Exmark CD42CD and CD48CD are a testament to innovative design in landscape maintenance equipment. Their powerful performance, cutting-edge technology, and user-oriented features further solidify their reputation as reliable tools for professional landscapers aiming to enhance productivity and achieve exceptional results in their mowing tasks.
Top Page Image Contents