Exmark 850000 AND HIGHER manual Side Discharge, Transporting a Unit, To Operate the Machine

Page 26

Operation

Figure 15

1.

Front of the machine.

5.

Lever position for

 

 

 

pushing the machine

2.

Rotate bypass release

6.

Rotate bypass release

 

knob counterclockwise

 

knob clockwise

3.

Lever position for

7.

Release lever

 

operating the machine.

 

 

4.Pull lever in this direction

DANGER

Without the discharge deflector, mulch kit, or entire grass collection system mounted in place, you and others are exposed to blade contact and thrown debris. Contact with rotating mower blade(s) and thrown debris will cause injury or death.

Never remove the discharge deflector from the mower because the discharge deflector routes material down toward the turf. If the discharge deflector is ever damaged, replace it immediately.

Never put your hands or feet under the mower.

Never try to clear discharge area or mower blades unless you move the move the blade control switch to Off and rotate the ignition key to Off. Also remove the key and pull the wire off the spark plug(s).

Transporting

Transporting a Unit

4.Loosen the knob by turning counterclockwise. Then pull the release lever on the underside of machine (Figure 15) towards the back of the machine and retighten the knob to hold the release lever back in the released state. Repeat this on each side of the machine.

5.Release the parking brake. The machine is now able to be pushed by hand.

To Operate the Machine

Loosen the bypass knob, push the release levers forward, and retighten the knob to engage the drive system (Figure 15).

Side Discharge

The mower has a hinged discharge deflector that disperses clippings to the side and down toward the turf.

Use a heavy-duty trailer or truck to transport the machine. Lock brake and block wheels. Securely fasten the machine to the trailer or truck with straps, chains, cable, or ropes. Be sure that the trailer or truck has all necessary lighting and marking as required by law. Secure a trailer with a safety chain.

CAUTION

This unit does not have proper turn signals, lights, reflective markings, or a slow moving vehicle emblem. Driving on a street or roadway without such equipment is dangerous and can lead to accidents causing personal injury. Driving on a street or roadway without such equipment may also be a violation of State laws and the operator may be subject to traffic tickets and/or fines.

Do Not drive a unit on a public street or roadway.

26

Image 26
Contents Quest California Introduction Contents Safe Operating Practices SafetySafety Alert Symbol General OperationChildren ServiceSlope Operation TowingExmark Riding Mower Safety General ServiceSafety Safety and Instructional Decals 103-6327109-6035 116-0532 117-2718 PTO Symbols 116-2321 Systems SpecificationsModel Numbers Dimensions Product Overview Torque RequirementsOperation ControlsOperating Instructions Recommended GasolineOperation Starting the Engine Using Stabilizer/ConditionerChecking the Engine Oil Level Gasoline/Alcohol blendsEngaging the Blades Operating the BladesStopping the Engine Disengaging the BladesTesting the Safety Interlock System Safety Interlock SystemUnderstanding the Safety Interlock System Driving Forward or Backward Forward Adjusting the Height of Cut Stopping the Machine BackwardChanging the Seat Ride Suspension Adjusting the Anti-Scalp RollersPositioning the Seat Adjusting the Tilt Adjusting the Motion Control LeversAdjusting the Height Pushing the Machine by HandTransporting a Unit TransportingSide Discharge To Operate the MachineOperating Tips Blade Maintenance When StoppingKeep the Underside of the Mower Clean Long GrassMaintenance Recommended Maintenance SchedulesLubrication Accessing the BatteryRaising the Seat Greasing the BearingsServicing the Engine Oil Engine MaintenanceServicing the Air Cleaner Servicing Paper ElementChanging the Oil and Filter Checking the Hydraulic Oil Level Change the Hydraulic System FilterServicing the Spark Plug Removing the Spark PlugInstalling the Spark Plug Cleaning the Blower HousingFuel System Maintenance Checking the Spark PlugRemoving the Battery Charging the BatteryElectrical System Maintenance Checking the Battery Charge Recommended Jump Starting Procedure Do Not jump start a weak battery if these conditions existServicing the Fuses and Relay Drive System Maintenance Checking the Tire PressureInstalling the Battery Before Inspecting or Servicing the Blades Mower Maintenance Servicing the Cutting BladesInspecting the Blades Checking for Bent BladesRemoving the Blades Sharpening the BladesInspecting the Belts Mower Belt MaintenanceInstalling the Blades Replacing the Mower BeltLeveling the Mower Deck 52 Inch DecksAdjusting the Blade Slope Replacing the Discharge Deflector Tracking Adjustment Brake Linkage AdjustmentCleaning Washing the Underside of the MowerPlug any holes in mower with bolts and locknuts Cleaning and Storage StorageTroubleshooting Problem Possible Cause Corrective ActionTo Pushing the Machine by Hand Schematics DiagramElectrical Logic Schematic Terminal a Terminal R Switch Ignition OFFExmark Quest Turf Equipment Page Page Service Record Page Page See EXMARK’S Complete Line of Accessories and Options