Exmark 850000 AND HIGHER manual PTO Symbols

Page 12

Safety

117–2718

PTO Symbols

1. PTO—Off

2. PTO—On

 

 

 

 

 

 

 

 

 

 

 

 

109-8965

1.

Warning–read the Operator’s Manual.

5.

Tipping hazard–avoid sudden and sharp turns while on

 

 

 

slopes, only mow across slopes less than 15 degrees,

 

 

 

keep a safe distance from water, and only mow up and

 

 

 

down slopes less than 15 degrees.

2.

Read the instructions before servicing or performing

6.

Cutting/dismemberment hazard of hand or foot, mower

 

maintenance; apply parking brake, remove the ignition key

 

blade–stay away from moving parts.

 

and disconnect the spark plug wire.

 

 

3.

Thrown object hazard—keep bystanders a safe distance

7.

Crushing/dismemberment hazard of bystanders,

 

from the machine, pick up debris before operating, keep

 

reversing–Do Not carry passengers, look behind and

 

the discharge deflector in place.

 

down when reversing.

4.Loss of traction/control hazard, slopes–loss of traction/control on slope, disengage the blade control switch (PTO), proceed off the slope slowly.

12

Image 12
Contents Quest California Introduction Contents Safety Safety Alert SymbolSafe Operating Practices General OperationService Slope OperationChildren TowingExmark Riding Mower Safety General ServiceSafety Safety and Instructional Decals 103-6327109-6035 116-0532 117-2718 PTO Symbols 116-2321 Specifications Model NumbersSystems Dimensions Product Overview Torque RequirementsOperation ControlsOperating Instructions Recommended GasolineOperation Using Stabilizer/Conditioner Checking the Engine Oil LevelStarting the Engine Gasoline/Alcohol blendsOperating the Blades Stopping the EngineEngaging the Blades Disengaging the BladesSafety Interlock System Understanding the Safety Interlock SystemTesting the Safety Interlock System Driving Forward or BackwardAdjusting the Height of Cut Stopping the MachineForward BackwardAdjusting the Anti-Scalp Rollers Positioning the SeatChanging the Seat Ride Suspension Adjusting the Motion Control Levers Adjusting the HeightAdjusting the Tilt Pushing the Machine by HandTransporting Side DischargeTransporting a Unit To Operate the MachineOperating Tips When Stopping Keep the Underside of the Mower CleanBlade Maintenance Long GrassMaintenance Recommended Maintenance SchedulesAccessing the Battery Raising the SeatLubrication Greasing the BearingsEngine Maintenance Servicing the Air CleanerServicing the Engine Oil Servicing Paper ElementChanging the Oil and Filter Checking the Hydraulic Oil Level Change the Hydraulic System FilterServicing the Spark Plug Removing the Spark PlugCleaning the Blower Housing Fuel System MaintenanceInstalling the Spark Plug Checking the Spark PlugCharging the Battery Electrical System MaintenanceRemoving the Battery Checking the Battery Charge Recommended Jump Starting Procedure Do Not jump start a weak battery if these conditions existDrive System Maintenance Checking the Tire Pressure Installing the BatteryServicing the Fuses and Relay Mower Maintenance Servicing the Cutting Blades Inspecting the BladesBefore Inspecting or Servicing the Blades Checking for Bent BladesRemoving the Blades Sharpening the BladesMower Belt Maintenance Installing the BladesInspecting the Belts Replacing the Mower BeltLeveling the Mower Deck 52 Inch DecksAdjusting the Blade Slope Replacing the Discharge Deflector Tracking Adjustment Brake Linkage AdjustmentCleaning Washing the Underside of the MowerPlug any holes in mower with bolts and locknuts Cleaning and Storage StorageTroubleshooting Problem Possible Cause Corrective ActionTo Pushing the Machine by Hand Schematics DiagramElectrical Logic Schematic Terminal a Terminal R Switch Ignition OFFExmark Quest Turf Equipment Page Page Service Record Page Page See EXMARK’S Complete Line of Accessories and Options