Exmark 4501-191 Rev.A manual Slope Operation, Children, Towing, Service

Page 6

Safety

safely enough to protect themselves and others from serious injury.

Always follow the recommendations for wheel weights or counterweights.

Slope Operation

Slopes are a major factor related to loss of control and tip-over accidents, which can result in severe injury or death. Operation on all slopes requires extra caution. If you cannot back up the slope or if you feel uneasy on it, Do Not mow it.

Do Not mow slopes greater than 15 degrees.

Watch for ditches, holes, rocks, dips, and rises that change the operating angle, as rough terrain could overturn the machine.

Choose a low ground speed so you will not have to stop while operating on a slope.

Do Not mow slopes when grass is wet. Slippery conditions reduce traction and could cause sliding and loss of control.

Reduce speed and use extreme caution on slopes.

Do Not make sudden turns or rapid speed changes.

Remove or mark obstacles such as rocks, tree limbs, etc. from the mowing area. Tall grass can hide obstacles.

Avoid sudden starts when mowing uphill because the mower may tip backwards.

Be aware that operating on wet grass, across steep slopes or downhill may cause the mower to lose traction. Loss of traction to the drive wheels may result in sliding and a loss of braking and steering.

Always avoid sudden starting or stopping on a slope. If tires lose traction, disengage the blades and proceed slowly off the slope.

Use extreme care with grass collection systems or other attachments. These can change the stability of the machine and cause loss of control.

Do Not try to stabilize the machine by putting your foot on the ground.

Do Not mow near drop-offs, ditches, steep banks or water. Wheels dropping over edges can cause rollovers, which may result in serious injury, death or drowning.

Use a walk behind mower and/or a hand trimmer on slopes greater than 15 degrees, near drop-offs, ditches, steep banks or water.

Children

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. Never assume that children will remain where you last saw them.

Keep children out of the mowing area and under the watchful care of another responsible adult, not the operator.

Be alert and turn the machine off if children enter the area.

Before and while backing or changing direction, look behind, down, and side-to-side for small children.

Never carry children, even with the blades off. They may fall off and be seriously injured or interfere with safe machine operation.

Children who have been given rides in the past may suddenly appear in the mowing area for another ride and be run over or backed over by the mower.

Never allow children to operate the machine.

Use extra care when approaching blind corners, shrubs, trees, the end of a fence or other objects that may obscure vision.

Towing

Use for towing only if equipped with an Exmark hitch kit. Do Not attach towed equipment except at the hitch point.

Follow Exmark’s recommendation for weight limits for towed equipment and towing on slopes. This information can be found in the hitch kit instruction sheet and on the decal.

Never allow children or others in or on towed equipment.

On slopes, the weight of the towed equipment may cause loss of traction and loss of control.

Travel slowly and allow extra distance to stop.

Service

Safe Handling of Gasoline

To avoid personal injury or property damage, use extra care when handling gasoline and other fuels. They are flammable and the vapors are explosive.

6

Image 6
Contents Quest California Introduction Contents Safe Operating Practices SafetySafety Alert Symbol General OperationChildren ServiceSlope Operation TowingExmark Riding Mower Safety General ServiceSafety Safety and Instructional Decals 106-8717119-8814 PTO Switch Symbols 116-4220 120-2239 Specifications Model NumbersSystems Dimensions Product Overview Torque RequirementsOperation ControlsHeight-of-Cut Foot Lever Think Safety FirstOperating Instructions Fuel WindowUsing Stabilizer/Conditioner Recommended GasolineChecking the Engine Oil Level Starting the EngineFilling the Fuel Tank Engaging the Blades Operating the BladesStopping the Engine Disengaging the BladesTesting the Safety Interlock System Safety Interlock SystemUnderstanding the Safety Interlock System Driving Forward or BackwardBackward Adjusting the Height of Cut Adjusting the Anti-Scalp RollersStopping the Machine Positioning the Seat Inch DeckAdjusting the Motion Control Levers Changing the Seat Ride SuspensionPushing the Machine by Hand To Operate the Machine Side DischargeTransporting Transporting a UnitOperating Tips Blade Maintenance When StoppingKeep the Underside of the Mower Clean Long GrassMaintenance Recommended Maintenance SchedulesRaising the Seat LubricationGreasing the Bearings Cleaning the Element Engine MaintenanceServicing the Air Cleaner Servicing the Engine OilChanging the Oil and Filter Removing the Spark Plug Installing the Spark PlugServicing the Spark Plug Checking the Spark PlugServicing the Emissions Filter Cleaning the Blower HousingFuel System Maintenance Replacing the Fuel FilterElectrical System Maintenance Charging the BatteryRemoving the Battery Checking the Battery Charge Recommended Jump Starting ProcedureInstalling the Battery Do Not jump start a weak battery if these conditions existReleasing the Electric Brake Drive System Maintenance Checking the Tire PressureServicing the Fuses Checking the Hydraulic Oil LevelChanging the Hydraulic System Filter and Oil Removing Hydraulic System FiltersInstalling the Hydraulic System Filters Before Inspecting or Servicing the Blades Mower Maintenance Servicing the Cutting BladesBleeding the Hydraulic System Inspecting the BladesChecking for Bent Blades Measure from the tip of the blade to the flat surface hereRemoving the Blades Sharpening the BladesInstalling the Blades Leveling the Mower DeckSide-to-Side Leveling Blades side to side Adjusting the Front-to-Rear Blade Slope Inspecting the Belts Mower Belt MaintenanceRemoving the Mower Replacing the Mower BeltInstalling the Mower Replacing the Discharge DeflectorRod Deck brackets Spring Clean Engine and Exhaust System Area Washing the Underside of the MowerCleaning and Storage StorageTroubleshooting Problem Possible Cause Corrective ActionTo Pushing the Machine by Hand Schematics Electrical DiagramElectrical Logic Schematic Exmark Quest Turf Equipment Page Page Service Record Date Description of Work Done Service Done ByPage This page may be copied for personal use Exmark Accessories and Options

4501-191 Rev.A specifications

The Exmark 4501-191 Rev.A is a cutting-edge lawn mower designed to deliver exceptional performance and efficiency for both residential and commercial users. With its robust build and advanced technology, this model has quickly gained popularity among landscapers and homeowners alike.

One of the standout features of the Exmark 4501-191 Rev.A is its powerful engine. Equipped with a high-performance Kohler engine, this mower provides ample horsepower and torque, ensuring efficient cutting even in tough conditions. This allows users to tackle dense grass and uneven terrains with ease, making it ideal for various landscaping needs.

The mower's innovative cutting system is another highlight that sets it apart. Featuring a large, durable cutting deck, the Exmark 4501-191 Rev.A offers an impressive cutting width, enabling users to cover more ground in less time. The deck is designed for precision, providing a clean and even cut every time. Additionally, the adjustable cutting height feature allows for customized lawn care, accommodating different grass types and lengths.

One of the remarkable technologies integrated into the Exmark 4501-191 Rev.A is its efficient fuel system. The mower is engineered to maximize fuel efficiency, allowing users to extend their mowing sessions without the frequent need to refuel. This feature not only saves time but also reduces overall operating costs, making the mower a cost-effective choice for users with large properties.

Comfort and maneuverability are also key characteristics of the Exmark 4501-191 Rev.A. The ergonomic controls are designed for ease of use, providing a smooth and responsive experience. The mower features large rear wheels and front casters, allowing for agile navigation around obstacles and tight spaces. This is particularly beneficial for commercial users who often work in complex environments.

Maintenance is simplified with the Exmark 4501-191 Rev.A, allowing users to focus on lawn care rather than upkeep. The model is built with durable materials, ensuring longevity and reducing wear and tear. Clear access points for cleaning and maintenance further enhance user convenience, making it easy to keep the mower in top shape.

In summary, the Exmark 4501-191 Rev.A is a high-performance lawn mower that combines power, efficiency, and ease of use. With its advanced engine, innovative cutting system, and user-friendly design, it stands out as an excellent choice for anyone looking to achieve a beautifully manicured lawn. Whether for commercial or residential use, this mower is a reliable tool that promises exceptional results.