Exmark 000 & higher, 850 manual Using the Grass Bag, Danger, Operation

Page 20
Using the Grass Bag

Operation

Figure 17

1.

Front wheel shaft

4.

Front quadrant block cut

 

assembly

 

heights

2.

Pull up

5.

Pull outward

3.

Height adjuster

6.

Shaft groove

2.Insert the front wheel shaft assembly into the desired cut height setting in the front quadrant block. Lower the height adjuster into the groove on the front wheel shaft. Pull and push the wheel shaft assembly to make sure it has locked into place.

Using the Grass Bag

Installing the Grass Bag

1.Stop the engine and wait for all moving parts to stop.

2.Open the rear door.

3.Grasp the handle on the bag and set the rear of the bag frame onto the handle bracket notch (Figure 18).

Figure 18

1.

Bag

4.

Handle bracket notch

2.

Handle

5.

Rear door

3.

Bag frame

6.

Lower

4.Once the bag is seated, lower the rear door onto the bag.

• Mowing with the Grass Bag

Manual background WARNING

A worn grass bag could allow small stones and other similar debris to be thrown in the operator’s or bystander’s direction. Thrown objects can result in serious personal injury or death to the operator or bystanders.

Check the grass bag frequently. If it is damaged, install a new Exmark replacement bag.

Cut the grass until the bag is full.

Note: Do Not overfill the bag.

Removing the Grass Bag

1.Stop the engine and wait for all moving parts to stop.

2.Raise the rear discharge door and grasp the handle on the bag.

3.Lift the bag off of the lawn mower and lower the rear discharge door.

4.Gradually tip the bag forward to empty the clippings.

5.To install the bag, refer to the section on Installing the Grass Bag.

Manual background DANGER

If the discharge door does not close completely, the lawn mower could throw objects. Thrown objects can result in serious personal injury or death to the operator or bystanders.

Never open the door to the discharge opening when the engine is running.

If you cannot close the door because the grass clippings clog the discharge area, stop the engine and gently move the discharge door handle back and forth until you can close the door completely. If you still cannot close the door, remove the obstruction with a stick, not your hand.

20

Image 20
Contents Part No. 4500-674Rev. A COMMERCIALFor Serial Nos 850,000 & Higher CALIFORNIA Proposition 65 Warning Introduction Model No Serial NoContents Safety Safety Alert SymbolSafety Safe Operating PracticesDANGER DANGERSafety Operation SafetyMaintenance and Storage Slope OperationSafety Do Not mow slopes when grass is wetSafety and Instructional Decals SafetyEC21KABBCX EC21KABBC,EC21KAY, EC21KA, EC21KABBCCASafety 109-8194EC21KABBCY, EC21KABBCCA 116-1922Safety 116-2737Specifications DimensionsSpecifications Curb WeightProduct Overview OperationControls OperationEngine Stop Switch Choke Control EC21HNBBC, EC21HNBBCXFuel Shut-OffValve Blade Control Lock Lever BladeHandle Adjustment Pre-StartOperating Instructions Open the Fuel Shut-OffValveStopping the Engine OperationUsing the Mulch Plug OperationAuthorized Service Dealer OperationTest Using the Grass Bag Adjusting the Cutting HeightDANGER OperationOperation Using the Grass BagDANGER Operating Tips OperationMaintenance MaintenanceRecommended Maintenance Schedules Periodic Maintenance Check Engine Oil LevelChecking the Blade Brake Clutch Blade Brake Clutch OnlyDANGER Check the Mower BladeMaintenance Check for Loose Hardware Check the Blade Brake Clutch Bail Operation BladeBrake Clutch Units Only MaintenanceMaintenance Service Air Filter Kawasaki UnitsService Air Filter EC21ASHN Units Service Air Filter EC21HNBBC and EC21HNBBCX Units MaintenanceService Interval After the first 5 hours Change Engine OilMaintenance Check Condition Of Belt Self-PropelledUnits Only Check Spark PlugsMaintenance Service Interval Every 100 hoursAdjustments Adjusting the Self-Propel DriveSelf-PropelledUnits Only MaintenanceMaintenance Adjusting the Blade Brake CableBlade Brake Clutch Units Only Cleaning Clean Grass Build-UpUnder DeckCleaning the Discharge Tunnel and Plug MaintenanceCleaning Under the Belt Cover Self-PropelledUnits Cleaning the Blade Brake Clutch ShieldCleaning Under the Cover Plate Non-BladeBrake OnlyMaintenance Waste DisposalMotor Oil Disposal Storage Preparing the Fuel SystemPreparing the Engine General Storage InformationTroubleshooting TroubleshootingTroubleshooting ProblemPossible Cause Corrective ActionExmark Commercial Turf Equipment 1 Year Limited WarrantyInstructions for Obtaining Warranty Service Owner’s ResponsibilitiesService Record Service Done ByDate Description of Work DoneWALK-BEHINDACCESSORIES AND OPTIONS MID-MOUNTRIDING ACCESSORIES AND OPTIONSOUT-FRONTRIDING ACCESSORIES AND OPTIONS
Related manuals
Manual 56 pages 15.39 Kb Manual 28 pages 32.2 Kb Manual 52 pages 57.34 Kb Manual 60 pages 42.39 Kb Manual 52 pages 61.7 Kb Manual 60 pages 62.85 Kb Manual 60 pages 23.73 Kb Manual 52 pages 50.76 Kb Manual 60 pages 57.72 Kb Manual 52 pages 62.21 Kb Manual 44 pages 57.61 Kb Manual 32 pages 16.59 Kb Manual 60 pages 29.4 Kb Manual 24 pages 21.56 Kb Manual 48 pages 5.05 Kb

000 & higher, 850 specifications

The Exmark 850 is a top-of-the-line commercial mower, known for its durability, efficiency, and advanced features, making it a favorite among landscaping professionals. With a powerful engine and innovative technology, the Exmark 850 is designed to tackle tough mowing tasks while ensuring a high-quality cut.

One of the standout characteristics of the Exmark 850 is its robust engine performance. Powered by a reliable Kohler or Kawasaki engine, it delivers exceptional horsepower, enabling it to handle various terrains and grass types with ease. The engine is designed for fuel efficiency, allowing operators to work longer hours without frequent refueling, ultimately boosting productivity on the job.

The cutting deck of the Exmark 850 is engineered with precision, utilizing Exmark's proprietary UltraCut technology. This technology ensures that grass is cut evenly and efficiently, resulting in a clean, manicured appearance. The deck height is easily adjustable, allowing users to quickly change settings to accommodate different lawn conditions and preferences.

Another key feature is the innovative suspension system that enhances ride quality. The Exmark 850 is equipped with a heavy-duty front axle and high-performance suspension that absorbs bumps and uneven ground, allowing for a smoother mowing experience. This is especially beneficial for operators who spend long hours on the mower, reducing fatigue and improving comfort.

Ergonomics play a crucial role in the design of the Exmark 850. The operator station is thoughtfully crafted with optimal controls and comfortable seating, allowing for easy maneuverability and long-term use. The ergonomic handles and intuitive control layout make it easy for operators to navigate tricky landscapes, enhancing overall efficiency.

In terms of durability, the Exmark 850 is built to withstand the rigors of commercial use. The high-quality materials and construction ensure that this mower can handle challenging conditions, extending its lifespan and reducing maintenance needs. Additionally, Exmark offers an extensive warranty program, providing peace of mind for operators.

Safety features are also prioritized in the Exmark 850, with guards and shields designed to protect the operator while mowers are in use. These features also include emergency shut-off systems and blade brake systems, ensuring compliance with safety standards.

Overall, the Exmark 850 stands out as a high-performing, reliable, and efficient mower suitable for a variety of commercial landscaping tasks. With its powerful engine, advanced cutting technology, ergonomic design, and emphasis on durability and safety, it continues to be a top choice for professionals seeking high-quality lawn care equipment.