Storage, Preparing the Fuel System | Exmark 850, 000 & higher

Storage

Preparing the Fuel System

To prepare the lawn mower for off season storage, perform the recommended maintenance procedures.

Store the lawn mower in a cool, clean, dry place. Cover the lawn mower to keep it clean and protected.

WARNING

Gasoline can vaporize if you store it over long periods of time. Gasoline vapors can explode if they come into contact with an open flame.

•Do Not store gasoline over long periods of time.

•Do Not store the lawn mower with gasoline in the fuel tank or the carburetor in an enclosure with an open flame. (For example, a furnace or a water heater pilot light.)

•Allow the engine to cool before storing it in any enclosure.

Empty the fuel tank when mowing the last time before storing the lawn mower.

1.Run the lawn mower until the engine stops from running out of fuel.

2.Prime the engine and start it again.

3.Allow the engine to run until it stops. When you can no longer start the engine it is sufficiently dry.

Preparing the Engine

1.While the engine is still warm, change the oil from the crankcase. Refer to Changing the Engine Oil section in Maintenance.

2.Remove the spark plug.

3.Using an oil can, add about one tablespoon of oil to the crankcase through the spark plug hole.

4.Slowly rotate the engine several times, using the starter rope, to distribute the oil.

5.Install the spark plug but Do Not connect the wire to the spark plug.

General Storage Information

1.Clean the lawn mower housing. Refer to

Cleaning the Underside of the Lawn Mower Housing section in Cleaning.

2.Clean any dirt and chaff from the cylinder, cylinder head fins, and blower housing.

3.Remove grass clippings, dirt, and grime from the external parts of the engine, the shrouding, and the top of the lawn mower housing.

4.Clean the BBC shield. Refer to Cleaning the Blade Brake Clutch Shield section in Cleaning.

5.Check the condition of the blade. Refer to Maintaining the Blade section in the Maintenance.

6.Service the air filter. Refer to Servicing the Air Filter in Maintenance.

7.Tighten all nuts, bolts, and screws.

8.Touch up all rusted or chipped paint surfaces with paint available from an Authorized Service Dealer.

Removing the Lawn Mower from Storage

1.Check and tighten all fasteners.

2.Remove the spark plug and spin the engine rapidly by pulling the starter rope to blow excess oil from the cylinder.

3.Clean the spark plug or replace it if it is cracked, broken, or if the electrodes are worn.

4.Install the spark plug and torque it to 17 ft-lb (23 N-m).

5.Perform any needed maintenance procedures.

6.Fill the fuel in the fuel tank with fresh gasoline.

7.Check the engine oil level.

8.Connect the wire to the spark plug.

000 & higher, 850 specifications

The Exmark 850 is a top-of-the-line commercial mower, known for its durability, efficiency, and advanced features, making it a favorite among landscaping professionals. With a powerful engine and innovative technology, the Exmark 850 is designed to tackle tough mowing tasks while ensuring a high-quality cut.

One of the standout characteristics of the Exmark 850 is its robust engine performance. Powered by a reliable Kohler or Kawasaki engine, it delivers exceptional horsepower, enabling it to handle various terrains and grass types with ease. The engine is designed for fuel efficiency, allowing operators to work longer hours without frequent refueling, ultimately boosting productivity on the job.

The cutting deck of the Exmark 850 is engineered with precision, utilizing Exmark's proprietary UltraCut technology. This technology ensures that grass is cut evenly and efficiently, resulting in a clean, manicured appearance. The deck height is easily adjustable, allowing users to quickly change settings to accommodate different lawn conditions and preferences.

Another key feature is the innovative suspension system that enhances ride quality. The Exmark 850 is equipped with a heavy-duty front axle and high-performance suspension that absorbs bumps and uneven ground, allowing for a smoother mowing experience. This is especially beneficial for operators who spend long hours on the mower, reducing fatigue and improving comfort.

Ergonomics play a crucial role in the design of the Exmark 850. The operator station is thoughtfully crafted with optimal controls and comfortable seating, allowing for easy maneuverability and long-term use. The ergonomic handles and intuitive control layout make it easy for operators to navigate tricky landscapes, enhancing overall efficiency.

In terms of durability, the Exmark 850 is built to withstand the rigors of commercial use. The high-quality materials and construction ensure that this mower can handle challenging conditions, extending its lifespan and reducing maintenance needs. Additionally, Exmark offers an extensive warranty program, providing peace of mind for operators.

Safety features are also prioritized in the Exmark 850, with guards and shields designed to protect the operator while mowers are in use. These features also include emergency shut-off systems and blade brake systems, ensuring compliance with safety standards.

Overall, the Exmark 850 stands out as a high-performing, reliable, and efficient mower suitable for a variety of commercial landscaping tasks. With its powerful engine, advanced cutting technology, ergonomic design, and emphasis on durability and safety, it continues to be a top choice for professionals seeking high-quality lawn care equipment.