Safety Signs | Exmark Metro 26 specs

1.6SAFETY SIGNS

1.6.1Keep all safety signs legible. Remove all grease, dirt and debris from safety signs and instructional labels.

1.6.2Safety signs must be replaced if they are missing or illegible.

1.6.3When new components are installed, be sure that current safety signs are affixed to the replaced components.

1.6.4New safety signs may be obtained from your authorized Exmark equipment dealer or distributor or from Exmark Mfg. Co. Inc.

1.6.5Safety signs can be affixed by peeling off the backing to expose the adhesive surface. Apply only to a clean, dry surface. Smooth to remove any air bubbles.

1.6.6Familiarize yourself with the following safety signs and instruction labels. They are critical to the safe operation of your Exmark commercial mower.

PART NO.: 68-7410

LOCATION: Top of Mower Deck

		98-4387
	PART NO.: 43-8480	PART NO.: 98-4387
	LOCATION: Top Surface of Mower Deck on	PART NO.: 98-4387
	LOCATION: Top Surface of Mower Deck on	LOCATION: Center of Handle Bar
	Left and Right Sides	LOCATION: Center of Handle Bar
	Left and Right Sides

PART NO.: 98-5954

LOCATION: Top of Mower Deck, Under

Belt Cover

PART NO.: 109-3756

LOCATION: Back of Mower Deck

	PART NO.: 103-6328
	LOCATION: Top Surface of
PART NO.: 104-8585	Throttle Control
LOCATION: On the Rear Discharge Door