Potential Hazard

DANGER

♦If the discharge door does not close completely, the lawn mower could throw objects.

WHAT CAN HAPPEN

♦Thrown objects can result serious personal injury or death to the operator or bystanders.

HOW TO AVOID THE HAZARD

♦Never open the door to the discharge opening when the engine is running.

♦If you cannot close the door because grass clippings clog the discharge area, stop the engine and clear the obstruction with a stick, not your hand, until you can close the door completely.

3.3.10Operating Tips:

•Review the Safety Instructions (Section 1) and read this manual carefully before operating the lawn mower.

•Set the engine speed to the fastest position for the best cutting results.

•Maintain a sharp blade throughout the cutting season. Periodically file down nicks on the blade. Replace the blade when necessary with an original Exmark replacement blade.

•Clean the air filter frequently. Mulching stirs up more clippings and dust which clogs the air filter and reduces engine performance.

Cutting Grass:

•Grass grows at different rates at different times of the year. In the summer heat, it is best to cut grass at the 2-1/2 inch (64 mm), 3 inch (76 mm), or 3- 1/2 inch (90 mm) cutting height settings. Cut only about a third of the grass blade at a time. Do not cut below the 2-1/2 inch (64 mm) setting unless the grass is sparse or it is late fall when grass growth begins to slow down.

•When cutting grass over 6 inches (15 cm) tall, first mow at the highest cutting height setting and walk slower; then mow again at a lower setting for the best lawn appearance. If the grass is too long and the leaves clump on top of the lawn, the lawn mower may plug and cause the engine to stall.

•Alternate the mowing direction. This helps disperse the clippings over the lawn for even fertilization.

If the finished lawn appearance is unsatisfactory, try one or more of the following:

•Sharpen the blade.

•Walk at a slower pace while mowing.

•Raise the cutting height on your lawn mower.

•Cut the grass more frequently.

•Overlap cutting swaths instead of cutting a full swath with each pass.

•Set the cutting height on the front wheels one notch lower than the rear wheels. For example, set the front wheels at 2-1/2 inches (64 mm) and the rear wheels at the 3 inches (76 mm).

Metro 26 specifications

The Exmark Metro 26 is a notable walk-behind mower designed for professional landscapers and dedicated homeowners seeking high performance and reliability. Renowned for its compact size and robust construction, the Metro 26 is ideal for navigating tight spaces while delivering an excellent cut quality.

One of the standout features of the Metro 26 is its powerful 26-inch cutting deck, engineered to provide efficient mowing capabilities. The deck is crafted from durable steel, ensuring longevity and resilience against the wear and tear of frequent use. This mower's design emphasizes precision, facilitating clean cuts and a neat finish on various types of grass.

Equipped with Exmark’s patented Quantum engine, the Metro 26 boasts impressive power and efficiency. This engine is specially designed to optimize fuel consumption while delivering maximum torque, resulting in improved performance even in thick grass. The machine features a dual-belt drive system that enhances power transfer and makes it easier to maintain speed during operation.

A notable characteristic of the Exmark Metro 26 is its adjustable cutting height. Users can easily select from a range of heights to suit their specific lawn care needs, allowing for versatility across various grass types and conditions. The convenient height adjustment lever is easily accessible, ensuring a seamless transition between different cutting heights.

The mower features large, durable rear wheels that provide excellent traction and maneuverability, helping operators to tackle slopes and uneven terrain with confidence. In addition, the front casters allow for exceptional steering control, making it easy to navigate around obstacles and achieve precise cutting patterns.

Another key technology integrated into the Metro 26 is its innovative bagging system. The mower is compatible with a high-capacity bagging system, enabling users to collect grass clippings effectively. This feature not only facilitates easier lawn cleanup but also helps maintain a tidy appearance on the lawn.

For ease of maintenance, the Exmark Metro 26 includes a bolt-on blade that simplifies sharpening and replacement. This mower also comes with a durable powder-coated finish that provides additional protection against corrosion and wear.

In summary, the Exmark Metro 26 is a high-performance walk-behind mower characterized by its powerful engine, durable construction, and user-friendly features. With its combination of precision engineering and thoughtful design, the Metro 26 is an excellent choice for anyone seeking a reliable mowing solution.