Exmark Metro 26 manual

Page 30

e)Open the fuel valve to the open position.

f)Drain the gasoline completely from the tank and fuel line into an approved fuel container.

g)Remove the fuel tank from the mower.

h)Close the fuel valve.

i)Pour a small amount of fuel in the fuel tank, move the fuel around in the tank, and pour it out into an approved fuel container.

j)Install the fuel tank and fuel line.

4.9Lubricating the Pivot Arms:

Service Interval: Lubricate after every 50 operating hours or when the season ends.

a)Move the rear wheel cutting height levers to the center setting.

b)Locate the grease fitting on the underside of the mower deck. Wipe the grease fittings with a clean rag (Figure 21).

FIGURE 21

c)Install a grease gun onto the fitting and gently apply 2 or 3 pumps of #2 multi- purpose lithium base grease (Figure 21).

NOTE: Excessive grease pressure may damage the seals.

4.10Adjusting the Self-Propel Drive:

NOTE: Improper adjustment can cause transmission failure.

a)If the lawn mower does not self-propel or has a tendency to creep forward when the control bar is released, adjust the transmission cable on the deck.

b)If the lawn mower does not self propel, rotate the transmission cable nuts clockwise 1/2 turn to tighten the belt.

c)If the lawn mower creeps forward, rotate the transmission cable nuts 1/2 turn counterclockwise to loosen the belt (Figure 22).

d)If the lawnmower does not drive up slopes, you may need to increase belt tension. Repeat step b).

FIGURE 22

25

Image 30
Contents For Serial Nos 561,194 & Higher 600,000 & Higher Potential Hazard Exmark Parts PLUS→ Program Operators Manual Table of Contents Safety Alert Symbol TrainingPreparation Carbon monoxide can kill you Potential Hazard Potential Hazard Operation Potential Hazard Maintenance and Storage Safety Signs Engine DimensionsModel Number Fuel SystemPRE-START Operating Instructions Page Page Cutting Heights Moving blade can cause serious injury Potential Hazard Potential Hazard Maintenance Recommended Maintenance ScheduleWashing Method Scraping Method Paper Air Filter Screw Sail Flat Sail Wear Sail Slot Worn or damaged blade can break Page Page Oil may be hot after engine has been run Gasket Page Storage Potential Hazard Accessories Corrective Action Year Limited Warranty Exmark Turf Equipment For units purchased on or after October 1Evaporative Emission Control Warranty Statement Date Description of Work Done Page Page Page See EXMARK’S Complete Line of Accessories Check us out on the Web

Metro 26 specifications

The Exmark Metro 26 is a notable walk-behind mower designed for professional landscapers and dedicated homeowners seeking high performance and reliability. Renowned for its compact size and robust construction, the Metro 26 is ideal for navigating tight spaces while delivering an excellent cut quality.

One of the standout features of the Metro 26 is its powerful 26-inch cutting deck, engineered to provide efficient mowing capabilities. The deck is crafted from durable steel, ensuring longevity and resilience against the wear and tear of frequent use. This mower's design emphasizes precision, facilitating clean cuts and a neat finish on various types of grass.

Equipped with Exmark’s patented Quantum engine, the Metro 26 boasts impressive power and efficiency. This engine is specially designed to optimize fuel consumption while delivering maximum torque, resulting in improved performance even in thick grass. The machine features a dual-belt drive system that enhances power transfer and makes it easier to maintain speed during operation.

A notable characteristic of the Exmark Metro 26 is its adjustable cutting height. Users can easily select from a range of heights to suit their specific lawn care needs, allowing for versatility across various grass types and conditions. The convenient height adjustment lever is easily accessible, ensuring a seamless transition between different cutting heights.

The mower features large, durable rear wheels that provide excellent traction and maneuverability, helping operators to tackle slopes and uneven terrain with confidence. In addition, the front casters allow for exceptional steering control, making it easy to navigate around obstacles and achieve precise cutting patterns.

Another key technology integrated into the Metro 26 is its innovative bagging system. The mower is compatible with a high-capacity bagging system, enabling users to collect grass clippings effectively. This feature not only facilitates easier lawn cleanup but also helps maintain a tidy appearance on the lawn.

For ease of maintenance, the Exmark Metro 26 includes a bolt-on blade that simplifies sharpening and replacement. This mower also comes with a durable powder-coated finish that provides additional protection against corrosion and wear.

In summary, the Exmark Metro 26 is a high-performance walk-behind mower characterized by its powerful engine, durable construction, and user-friendly features. With its combination of precision engineering and thoughtful design, the Metro 26 is an excellent choice for anyone seeking a reliable mowing solution.