Exmark Metro 26 manual

Page 18

NOTE: The blade control lever will release rapidly when the blade control bail is released. To avoid minor injury, keep hands clear of the blade control lever when the blade control bail is released.

3.3.6Checking the Blade Brake Clutch:

Check the Blade Brake Clutch (BBC) system before each use to ensure that it is operating properly.

Normal Test:

a)Stop the engine and wait for all moving parts to stop.

b)Move the lawn mower onto a paved surface in a non-windy area.

c)Set all four wheels in to the 2-1/2 in. (64 mm) cutting height (Figure 6).

d)Set the ground speed selector to the N (Neutral) position.

e)Take a half sheet of newspaper and crumple it into ball small enough to go

under the deck (about three inches or 76 mm in diameter) as shown in Figure 5.

FIGURE 5

f)Place the ball of newspaper five inches (12.7 cm) in front of the lawn mower (Figure 5).

g)Start the engine.

h)Squeeze the blade control bail against the handle.

i)Move the blade control lever to the full forward Latch position. Blades should engage.

j)Release the blade control bail. You should hear a “bang.” The blade should stop in three seconds.

k)Immediately push the lawn mower over the newspaper ball.

l)Stop the engine and wait for all moving parts to stop.

m)Walk around the lawn mower to check for the newspaper ball. If the ball did not go under the deck, repeat steps g) through l).

n)Pull the lawn mower away from the newspaper. If the newspaper ball unravels or is shredded, the blade has not properly stopped, resulting in an unsafe operating condition. Contact an Authorized Service Dealer.

13

Image 18
Contents For Serial Nos 561,194 & Higher 600,000 & Higher Potential Hazard Exmark Parts PLUS→ Program Operators Manual Table of Contents Safety Alert Symbol TrainingPreparation Carbon monoxide can kill you Potential Hazard Potential Hazard Operation Potential Hazard Maintenance and Storage Safety Signs Engine DimensionsModel Number Fuel SystemPRE-START Operating Instructions Page Page Cutting Heights Moving blade can cause serious injury Potential Hazard Potential Hazard Maintenance Recommended Maintenance ScheduleWashing Method Scraping Method Paper Air Filter Screw Sail Flat Sail Wear Sail Slot Worn or damaged blade can break Page Page Oil may be hot after engine has been run Gasket Page Storage Potential Hazard Accessories Corrective Action Year Limited Warranty Exmark Turf Equipment For units purchased on or after October 1Evaporative Emission Control Warranty Statement Date Description of Work Done Page Page Page See EXMARK’S Complete Line of Accessories Check us out on the Web

Metro 26 specifications

The Exmark Metro 26 is a notable walk-behind mower designed for professional landscapers and dedicated homeowners seeking high performance and reliability. Renowned for its compact size and robust construction, the Metro 26 is ideal for navigating tight spaces while delivering an excellent cut quality.

One of the standout features of the Metro 26 is its powerful 26-inch cutting deck, engineered to provide efficient mowing capabilities. The deck is crafted from durable steel, ensuring longevity and resilience against the wear and tear of frequent use. This mower's design emphasizes precision, facilitating clean cuts and a neat finish on various types of grass.

Equipped with Exmark’s patented Quantum engine, the Metro 26 boasts impressive power and efficiency. This engine is specially designed to optimize fuel consumption while delivering maximum torque, resulting in improved performance even in thick grass. The machine features a dual-belt drive system that enhances power transfer and makes it easier to maintain speed during operation.

A notable characteristic of the Exmark Metro 26 is its adjustable cutting height. Users can easily select from a range of heights to suit their specific lawn care needs, allowing for versatility across various grass types and conditions. The convenient height adjustment lever is easily accessible, ensuring a seamless transition between different cutting heights.

The mower features large, durable rear wheels that provide excellent traction and maneuverability, helping operators to tackle slopes and uneven terrain with confidence. In addition, the front casters allow for exceptional steering control, making it easy to navigate around obstacles and achieve precise cutting patterns.

Another key technology integrated into the Metro 26 is its innovative bagging system. The mower is compatible with a high-capacity bagging system, enabling users to collect grass clippings effectively. This feature not only facilitates easier lawn cleanup but also helps maintain a tidy appearance on the lawn.

For ease of maintenance, the Exmark Metro 26 includes a bolt-on blade that simplifies sharpening and replacement. This mower also comes with a durable powder-coated finish that provides additional protection against corrosion and wear.

In summary, the Exmark Metro 26 is a high-performance walk-behind mower characterized by its powerful engine, durable construction, and user-friendly features. With its combination of precision engineering and thoughtful design, the Metro 26 is an excellent choice for anyone seeking a reliable mowing solution.