Exmark Metro 26 manual Scraping Method

Page 25

c)Hold the running garden hose a handle level and direct the water to flow on the ground just in front of the right rear tire (Figure 11).

G0213

FIGURE 11

d) Engage the blade.

NOTE: The blade will draw in water and wash out clippings. Let the water run until you no longer see clipping being washed out from under the housing.

e)Disengage the blade, stop the engine and wait for all moving parts to stop.

f)Turn off the water.

g)Start the lawn mower, engage the blade, and let the lawn mower run for a few minutes to dry out its components.

Scraping Method

If washing does not remove all debris from under the lawn mower, scrape it clean.

a)Disconnect the wire from the spark plug.

b)Drain the fuel from the fuel tank. Refer to section 4.8, Emptying the Fuel Tank and Cleaning the Fuel Filter.

WARNING

POTENTIAL HAZARD

♦Tipping the lawn mower may cause the fuel to leak from the carburetor or the fuel tank.

WHAT CAN HAPPEN

♦Gasoline is extremely flammable, highly explosive, and under certain conditions, can cause personal injury or property damage.

HOW TO AVOID THE HAZARD

♦Avoid fuel spills by running the engine dry or by removing the gasoline with a hand pump; never siphon.

c)Tip the lawn mower onto its right side.

d)Remove the dirt and grass clippings with a hardwood scraper. Avoid burrs and sharp edges.

e)Turn the lawn mower upright.

f)Fill the fuel tank.

g)Connect the wire to the spark plug.

4.4Cleaning the Discharge Tunnel: Service Interval: After each use.

Always be sure that the discharge tunnel door closes securely when you remove the bag. If the debris prevents the discharge door form closing securely, clean the inside of the discharge tunnel and the door thoroughly.

20

Page 24 Page 26
Image 25
Page 24 Page 26
Contents For Serial Nos 561,194 & Higher 600,000 & Higher Potential Hazard Exmark Parts PLUS→ Program Operators Manual Table of Contents Training Safety Alert SymbolPreparation Carbon monoxide can kill you Potential Hazard Potential Hazard Operation Potential Hazard Maintenance and Storage Safety Signs Model Number DimensionsEngine Fuel SystemPRE-START Operating Instructions Page Page Cutting Heights Moving blade can cause serious injury Potential Hazard Potential Hazard Recommended Maintenance Schedule MaintenanceWashing Method Scraping Method Paper Air Filter Screw Sail Flat Sail Wear Sail Slot Worn or damaged blade can break Page Page Oil may be hot after engine has been run Gasket Page Storage Potential Hazard Accessories Corrective Action For units purchased on or after October 1 Year Limited Warranty Exmark Turf EquipmentEvaporative Emission Control Warranty Statement Date Description of Work Done Page Page Page Check us out on the Web See EXMARK’S Complete Line of Accessories

Metro 26 specifications

The Exmark Metro 26 is a notable walk-behind mower designed for professional landscapers and dedicated homeowners seeking high performance and reliability. Renowned for its compact size and robust construction, the Metro 26 is ideal for navigating tight spaces while delivering an excellent cut quality.

One of the standout features of the Metro 26 is its powerful 26-inch cutting deck, engineered to provide efficient mowing capabilities. The deck is crafted from durable steel, ensuring longevity and resilience against the wear and tear of frequent use. This mower's design emphasizes precision, facilitating clean cuts and a neat finish on various types of grass.

Equipped with Exmark’s patented Quantum engine, the Metro 26 boasts impressive power and efficiency. This engine is specially designed to optimize fuel consumption while delivering maximum torque, resulting in improved performance even in thick grass. The machine features a dual-belt drive system that enhances power transfer and makes it easier to maintain speed during operation.

A notable characteristic of the Exmark Metro 26 is its adjustable cutting height. Users can easily select from a range of heights to suit their specific lawn care needs, allowing for versatility across various grass types and conditions. The convenient height adjustment lever is easily accessible, ensuring a seamless transition between different cutting heights.

The mower features large, durable rear wheels that provide excellent traction and maneuverability, helping operators to tackle slopes and uneven terrain with confidence. In addition, the front casters allow for exceptional steering control, making it easy to navigate around obstacles and achieve precise cutting patterns.

Another key technology integrated into the Metro 26 is its innovative bagging system. The mower is compatible with a high-capacity bagging system, enabling users to collect grass clippings effectively. This feature not only facilitates easier lawn cleanup but also helps maintain a tidy appearance on the lawn.

For ease of maintenance, the Exmark Metro 26 includes a bolt-on blade that simplifies sharpening and replacement. This mower also comes with a durable powder-coated finish that provides additional protection against corrosion and wear.

In summary, the Exmark Metro 26 is a high-performance walk-behind mower characterized by its powerful engine, durable construction, and user-friendly features. With its combination of precision engineering and thoughtful design, the Metro 26 is an excellent choice for anyone seeking a reliable mowing solution.
Top Page Image Contents