FIGURE 13
THROTTLE TENSION
5.2.8Adjust Speed Control Lever Tension
a)Stop engine, wait for all moving parts to stop, and remove key.
b)Tension in speed control lever can be adjusted by adjusting the tightness of the lever pivot bolt, which is located under the seat near the speed control lever. See Figure 14.
c)Set the tension high enough that the speed control lever position is maintained during operation and loose enough to be moved comfortably by the operator.
FIGURE 14
THROTTLE TENSION
5.2.9Motion control linkage adjustment
WARNING
POTENTIAL HAZARD
♦Engine must be running and drive wheels must be turning so motion control adjustment can be performed.
WHAT CAN HAPPEN
♦Contact with moving parts or hot surfaces may cause personal injury.
HOW TO AVOID THE HAZARD
♦Keep fingers, hands, and clothing clear of rotating components and hot surfaces.
-30 -