Husqvarna 11, 13, 11 Bio, 13 Bio manual Do not smoke when carrying out maintenance

Page 11

SAFETY INSTRUCTIONS

•If leaks arise in the fuel system, the engine must not be started until the problem has been resolved.

•Store the machine and fuel in such a way that there is no risk that leaking fuel or fumes can cause any damage.

•Check the fuel level before each use and leave space for the fuel to expand, because the heat from the engine and the sun may otherwise cause the fuel to expand and overflow.

•Avoid overfilling. If you spill petrol on the machine, wipe up the spill and wait until it has evaporated before starting the engine. If you spill petrol on your clothing, change your clothing.

•Allow the machine to cool before performing any actions in the engine compartment.

•Be especially careful when handling battery acid. Acid on the skin can cause serious corrosive injuries. In the event of spillage on the skin wash immediately with water.

•Acid in the eyes can cause blindness, contact a doctor immediately.

•Take care with battery maintenance. Explosive gases form in the battery. Never perform maintenance on the battery while smoking or in the vicinity of open flames or sparks. This can cause the battery to explode and cause serious injuries.

•Make sure all nuts and bolts are tightened correctly and that the equipment is in good condition.

•Do not modify safety equipment. Check regularly to be sure it works properly. The machine must not be driven if protective plates, protective covers, safety switches or other protective devices are not fitted or are defective.

•Do not change the setting of governors and avoid running the engine at excessively high revs. If you run too fast, you risk damaging the machine components.

WARNING!

The engine and the exhaust system become very hot during operation.

Risk of burn injuries if touched.

WARNING!

The battery contains lead and lead pollutants, chemicals that are considered to cause cancer, birth defects or other reproductive impairment. Wash your hands after touching the battery.

Do not smoke when carrying out maintenance.

6003-009

English – 9

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Rider 11 Rider 13 Rider 11 Bio Rider 13 Bio Svenska Contents Towing IntroduktionDear customer Travel and transport on public roadsSerial number Safety InstructionsGood service Slope Explanation of SymbolsGeneral use Safety instructionsKeep children away from the area to be mowed Proceed as follows Driving on slopesChildren MaintenanceDo not smoke when carrying out maintenance Transport Location of the controls PresentationPresentation Brake pedal / Parking brake Presentation Rider 11 / 11 BIOThrottle and Choke lever Clutch pedalParking brake Presentation Rider 13/13 BIOSpeed limiter Lift lever for cutting unit Cutting unitFuelling Lever for adjustment of cutting heightSee safety instructions SeatFor Rider 11 and Rider 11 Bio Set the gear DrivingBefore starting Starting the engineWarm engine Cold engineFor Rider 11 and Rider 11 Bio Driving the machineFor Rider 13 and Rider 13 Bio Cutting tips Release lever Rider 13 and Rider 13 Bio Hill start, manual gearboxStopping the engine Daily Maintenance interval Hours Nance 100 MaintenanceMaintenance schedule Front hood Rider 11 and Rider Dismantling of the machine hoodsEngine hood Left-hand fender Right-hand fenderChecking and adjustment of the steering wires Checking the brake Rider 11 Rider 11 Bio Adjusting the brake Rider 11 and Rider 11 BioCheck and adjust the brakes on Rider 13 and Rider 13 Bio Poorly adjusted brakes can result in reduced braking powerReplacement of the fuel filter Checking and adjustment of the throttle wireReplacing the air filter Do not use compressed air to clean the paper filterFitting the wrong spark plug type can damage the engine Check the level of the battery acidProcedures on contact with acid Checking of the fuel pump’s air filterInspecting the safety system Check the engine’s cooling air intake Checking the tyre pressureChecking the cutting unit’s parallelism 6008-026H Placing in service position Maintenance Rider 11 BIO/13 BIOService position for BioClip 6017-221 6017-222 Take care not to get your hand trapped Restoring from service positionReplacing the break-pin BioClip Checking the bladesChanging the oil LubricationCheck the engine’s oil level General lubrication Lubrication of belt tensionerLubrication of front wheel bearings Lubrication Rider 11 and Rider 11 BioProblem Procedure Trouble Shooting ScheduleWinter storage ServiceStorage Technical Data Electrical system Rider 13 Bio Dimensions Rider 11 BioEU declaration of conformity Only applies to Europe EU-DECLARATION of ConformityWork done Servicejournal Rider 11/13Pre-delivery service After first 5 hoursWork done Date, mileage, stamp, sign ServicejournalServicejournal ´+H$r¶6C¨ Page 114 00

13, 11, 13, 11 Bio, 13 Bio specifications

Husqvarna is a brand synonymous with quality and innovation in the realm of outdoor power equipment, and the 11 and 13 series are prime examples of their commitment to excellence. The 11 and 13 models, including the 11 Bio and 13 Bio versions, showcase the brand's focus on performance, efficiency, and environmentally friendly practices. Both series are designed to cater to the needs of professionals and homeowners alike, making them versatile options for various landscaping and maintenance tasks.

The Husqvarna 11 series is characterized by its lightweight design and ease of use. These models include powerful engines that provide exceptional cutting performance, ensuring that tasks such as trimming, mowing, and edging are completed efficiently. One of the standout features of the 11 series is its ergonomic design, which reduces operator fatigue and enhances comfort during extended use. The intuitive controls make adjustments straightforward, helping users to focus on their work rather than struggling with complicated machinery.

On the other hand, the Husqvarna 13 series builds upon the strengths of the 11 series with increased power and advanced technology. The 13 models come equipped with a more potent engine, allowing for deeper, more efficient cutting. These units also feature improved fuel efficiency, which translates to lower running costs and fewer emissions. The Bio variants of both series, specifically the 11 Bio and 13 Bio, emphasize sustainability without sacrificing performance. These models incorporate specialized cutting systems designed to reduce waste and promote better mulching capabilities, making them ideal for environmentally conscious users.

Both series include advanced filtration systems that ensure longer engine life and reduced maintenance intervals. Integrated safety features are also paramount, with automatic shutdown functions and improved visibility for the operator. Furthermore, the durability of Husqvarna’s construction means these machines can withstand the rigors of daily use, making them a worthwhile investment for any user.

In conclusion, the Husqvarna 11 and 13 series, including the Bio variants, stand out in the market for their thoughtful design and innovative technology. These models demonstrate Husqvarna's dedication to creating efficient, powerful, and environmentally friendly equipment that meets the diverse needs of users everywhere. Whether you are a professional landscaper or a dedicated homeowner, the Husqvarna 11 and 13 series deliver performance, reliability, and sustainability.
Top Page Image Contents