Husqvarna 11, 13, 11 Bio, 13 Bio manual Introduktion, Dear customer, Towing, Intended use

Page 4

INTRODUKTION

Dear customer

Thank you for choosing a Husqvarna Rider. Husqvarna Riders are built to a unique design with a front- mounted cutting unit and a patented rear-wheel steering system. Riders are designed for maximum efficiency even in small or confined areas. The closely grouped controls and pedal-operated hydrostatic transmission (certain models) also contribute to the performance of this machine.

We hope you will find this operator’s manual very useful. By following its instructions (on operation, service, maintenance, etc.) you will significantly extend the life of the machine and even its second-hand value.

When you sell your Rider, make sure you pass on the operator’s manual to the new owner.

Travel and transport on public roads

Check the relevant road traffic regulations before driving the machine on a public road. If transporting the machine on another vehicle always use approved securing devices and make sure that the machine is securely held.

Towing

When your machine is equipped with a hydrostatic transmission you should, if necessary, only tow the machine over short distances and at a low speed, otherwise there is a risk of damaging the transmission.

Intended use

This machine is designed solely for cutting grass on conventional lawns and other cleared and leveled ground without obstacles, as rocks, stumps etc., and, in conjunction with accessories supplied by the manufacturer even for other special tasks for which instructions are delivered with the accessory. Use in any other way is considered as contrary to the intended use. Compliance with and strict adherence to the conditions of operation, service and repair as specified by the manufacturer also constitute essential elements of the intended use.

This machine should be operated, serviced and repaired only by persons who are familiar with its particular characteristics and who are acquainted with the relevant safety procedures.

Accident prevention regulations, all other generally recognised regulations on safety and occupational medicine, and all road traffic regulations must be observed at all times.

Any arbitrary modifications carried out to this machine may relieve the manufacturer of liability for any resulting damage or injury

2– English

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Rider 11 Rider 13 Rider 11 Bio Rider 13 Bio Svenska Contents Introduktion Dear customerTravel and transport on public roads TowingGood service Safety InstructionsSerial number Explanation of Symbols SlopeSafety instructions General useKeep children away from the area to be mowed Driving on slopes Proceed as followsMaintenance ChildrenDo not smoke when carrying out maintenance Transport Presentation PresentationLocation of the controls Presentation Rider 11 / 11 BIO Throttle and Choke leverClutch pedal Brake pedal / Parking brakeSpeed limiter Presentation Rider 13/13 BIOParking brake Cutting unit Lift lever for cutting unitLever for adjustment of cutting height See safety instructionsSeat FuellingDriving Before startingStarting the engine For Rider 11 and Rider 11 Bio Set the gearCold engine Warm engineFor Rider 13 and Rider 13 Bio Driving the machineFor Rider 11 and Rider 11 Bio Cutting tips Stopping the engine Hill start, manual gearboxRelease lever Rider 13 and Rider 13 Bio Maintenance schedule MaintenanceDaily Maintenance interval Hours Nance 100 Engine hood Dismantling of the machine hoodsFront hood Rider 11 and Rider Right-hand fender Left-hand fenderChecking and adjustment of the steering wires Adjusting the brake Rider 11 and Rider 11 Bio Check and adjust the brakes on Rider 13 and Rider 13 BioPoorly adjusted brakes can result in reduced braking power Checking the brake Rider 11 Rider 11 BioChecking and adjustment of the throttle wire Replacement of the fuel filterDo not use compressed air to clean the paper filter Replacing the air filterCheck the level of the battery acid Procedures on contact with acidChecking of the fuel pump’s air filter Fitting the wrong spark plug type can damage the engineInspecting the safety system Checking the tyre pressure Check the engine’s cooling air intakeChecking the cutting unit’s parallelism 6008-026H Service position for BioClip Maintenance Rider 11 BIO/13 BIOPlacing in service position 6017-221 6017-222 Restoring from service position Take care not to get your hand trappedChecking the blades Replacing the break-pin BioClipCheck the engine’s oil level LubricationChanging the oil Lubrication of belt tensioner General lubricationLubrication Rider 11 and Rider 11 Bio Lubrication of front wheel bearingsTrouble Shooting Schedule Problem ProcedureStorage ServiceWinter storage Technical Data Dimensions Rider 11 Bio Electrical system Rider 13 BioEU-DECLARATION of Conformity EU declaration of conformity Only applies to EuropeServicejournal Rider 11/13 Pre-delivery serviceAfter first 5 hours Work doneServicejournal Work done Date, mileage, stamp, signServicejournal ´+H$r¶6C¨ Page 114 00

13, 11, 13, 11 Bio, 13 Bio specifications

Husqvarna is a brand synonymous with quality and innovation in the realm of outdoor power equipment, and the 11 and 13 series are prime examples of their commitment to excellence. The 11 and 13 models, including the 11 Bio and 13 Bio versions, showcase the brand's focus on performance, efficiency, and environmentally friendly practices. Both series are designed to cater to the needs of professionals and homeowners alike, making them versatile options for various landscaping and maintenance tasks.

The Husqvarna 11 series is characterized by its lightweight design and ease of use. These models include powerful engines that provide exceptional cutting performance, ensuring that tasks such as trimming, mowing, and edging are completed efficiently. One of the standout features of the 11 series is its ergonomic design, which reduces operator fatigue and enhances comfort during extended use. The intuitive controls make adjustments straightforward, helping users to focus on their work rather than struggling with complicated machinery.

On the other hand, the Husqvarna 13 series builds upon the strengths of the 11 series with increased power and advanced technology. The 13 models come equipped with a more potent engine, allowing for deeper, more efficient cutting. These units also feature improved fuel efficiency, which translates to lower running costs and fewer emissions. The Bio variants of both series, specifically the 11 Bio and 13 Bio, emphasize sustainability without sacrificing performance. These models incorporate specialized cutting systems designed to reduce waste and promote better mulching capabilities, making them ideal for environmentally conscious users.

Both series include advanced filtration systems that ensure longer engine life and reduced maintenance intervals. Integrated safety features are also paramount, with automatic shutdown functions and improved visibility for the operator. Furthermore, the durability of Husqvarna’s construction means these machines can withstand the rigors of daily use, making them a worthwhile investment for any user.

In conclusion, the Husqvarna 11 and 13 series, including the Bio variants, stand out in the market for their thoughtful design and innovative technology. These models demonstrate Husqvarna's dedication to creating efficient, powerful, and environmentally friendly equipment that meets the diverse needs of users everywhere. Whether you are a professional landscaper or a dedicated homeowner, the Husqvarna 11 and 13 series deliver performance, reliability, and sustainability.
Top Page Image Contents