Husqvarna 11, 13, 11 Bio, 13 Bio manual Transport

Page 12

SAFETY INSTRUCTIONS

 

• Never use the machine indoors or in spaces

 

 

lacking proper ventilation. Exhaust fumes con-

 

 

tain carbon monoxide, an odourless, poisonous

 

 

and highly dangerous gas.

 

 

• Stop and inspect the equipment if you run over

 

 

or into anything. If necessary, make repairs

 

 

before starting.

 

 

• Never make adjustments with the engine

 

 

running.

 

 

• The machine is tested and approved only with

 

 

the equipment originally provided or

 

 

recommended by the manufacturer.

 

 

• The blades are sharp and can cause cuts. Wrap

 

 

the blades or wear protective gloves when

Never run the machine in an enclosed area.

8010-060

handling them.

 

 

 

• Check regularly that the parking brake works.

 

 

Adjust and maintain as required.

 

 

• The mulching unit should only be used where

 

 

better quality mowing is required and in known

 

 

areas.

 

 

• Reduce the risk of fire by removing grass, leaves

 

 

and other debris that may have fastened on the

 

 

machine. Allow the machine to cool before

 

 

putting it in storage.

 

 

Transport

 

 

• The machine is heavy and can cause serious

 

 

crush injuries. Be especially careful when it is

 

 

loaded in or out of a car or on and off of a trailer.

 

 

• Use an approved trailer to transport the ma-

 

8010-061

 

 

chine. Activate the parking brake, shutoff the fuel

Regularly clean grass, leaves and other debris from the

supply and secure the machine using approved

machine.

fasteners, such as tension belts, chains or ropes

 

when transporting.

 

•Check and observe local road traffic regulations before transporting or driving the machine on roads.

IMPORTANT INFORMATION

The parking brake is not sufficient to lock the machine during transport. Ensure you secure the machine firmly to the transport- ing vehicle. Reverse the machine on to the transporting vehicle to prevent it from overturning.

10 – English

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Rider 11 Rider 13 Rider 11 Bio Rider 13 Bio Svenska Contents Introduktion Dear customerTravel and transport on public roads TowingSafety Instructions Good serviceSerial number Explanation of Symbols SlopeSafety instructions General useKeep children away from the area to be mowed Driving on slopes Proceed as followsMaintenance ChildrenDo not smoke when carrying out maintenance Transport Presentation PresentationLocation of the controls Presentation Rider 11 / 11 BIO Throttle and Choke leverClutch pedal Brake pedal / Parking brakePresentation Rider 13/13 BIO Speed limiterParking brake Cutting unit Lift lever for cutting unitLever for adjustment of cutting height See safety instructionsSeat FuellingDriving Before startingStarting the engine For Rider 11 and Rider 11 Bio Set the gearCold engine Warm engineDriving the machine For Rider 13 and Rider 13 BioFor Rider 11 and Rider 11 Bio Cutting tips Hill start, manual gearbox Stopping the engineRelease lever Rider 13 and Rider 13 Bio Maintenance Maintenance scheduleDaily Maintenance interval Hours Nance 100 Dismantling of the machine hoods Engine hoodFront hood Rider 11 and Rider Right-hand fender Left-hand fenderChecking and adjustment of the steering wires Adjusting the brake Rider 11 and Rider 11 Bio Check and adjust the brakes on Rider 13 and Rider 13 BioPoorly adjusted brakes can result in reduced braking power Checking the brake Rider 11 Rider 11 BioChecking and adjustment of the throttle wire Replacement of the fuel filterDo not use compressed air to clean the paper filter Replacing the air filterCheck the level of the battery acid Procedures on contact with acidChecking of the fuel pump’s air filter Fitting the wrong spark plug type can damage the engineInspecting the safety system Checking the tyre pressure Check the engine’s cooling air intakeChecking the cutting unit’s parallelism 6008-026H Maintenance Rider 11 BIO/13 BIO Service position for BioClipPlacing in service position 6017-221 6017-222 Restoring from service position Take care not to get your hand trappedChecking the blades Replacing the break-pin BioClipLubrication Check the engine’s oil levelChanging the oil Lubrication of belt tensioner General lubricationLubrication Rider 11 and Rider 11 Bio Lubrication of front wheel bearingsTrouble Shooting Schedule Problem ProcedureService StorageWinter storage Technical Data Dimensions Rider 11 Bio Electrical system Rider 13 BioEU-DECLARATION of Conformity EU declaration of conformity Only applies to EuropeServicejournal Rider 11/13 Pre-delivery serviceAfter first 5 hours Work doneServicejournal Work done Date, mileage, stamp, signServicejournal ´+H$r¶6C¨ Page 114 00

13, 11, 13, 11 Bio, 13 Bio specifications

Husqvarna is a brand synonymous with quality and innovation in the realm of outdoor power equipment, and the 11 and 13 series are prime examples of their commitment to excellence. The 11 and 13 models, including the 11 Bio and 13 Bio versions, showcase the brand's focus on performance, efficiency, and environmentally friendly practices. Both series are designed to cater to the needs of professionals and homeowners alike, making them versatile options for various landscaping and maintenance tasks.

The Husqvarna 11 series is characterized by its lightweight design and ease of use. These models include powerful engines that provide exceptional cutting performance, ensuring that tasks such as trimming, mowing, and edging are completed efficiently. One of the standout features of the 11 series is its ergonomic design, which reduces operator fatigue and enhances comfort during extended use. The intuitive controls make adjustments straightforward, helping users to focus on their work rather than struggling with complicated machinery.

On the other hand, the Husqvarna 13 series builds upon the strengths of the 11 series with increased power and advanced technology. The 13 models come equipped with a more potent engine, allowing for deeper, more efficient cutting. These units also feature improved fuel efficiency, which translates to lower running costs and fewer emissions. The Bio variants of both series, specifically the 11 Bio and 13 Bio, emphasize sustainability without sacrificing performance. These models incorporate specialized cutting systems designed to reduce waste and promote better mulching capabilities, making them ideal for environmentally conscious users.

Both series include advanced filtration systems that ensure longer engine life and reduced maintenance intervals. Integrated safety features are also paramount, with automatic shutdown functions and improved visibility for the operator. Furthermore, the durability of Husqvarna’s construction means these machines can withstand the rigors of daily use, making them a worthwhile investment for any user.

In conclusion, the Husqvarna 11 and 13 series, including the Bio variants, stand out in the market for their thoughtful design and innovative technology. These models demonstrate Husqvarna's dedication to creating efficient, powerful, and environmentally friendly equipment that meets the diverse needs of users everywhere. Whether you are a professional landscaper or a dedicated homeowner, the Husqvarna 11 and 13 series deliver performance, reliability, and sustainability.
Top Page Image Contents