Husqvarna 966614001, 967004001, PZ5430, PZ5426FX warranty Safety Instructions, General Operation

Page 9

SAFETY

Safety Instructions

These instructions are for your safety. Read them carefully.

WARNING!

THIS CUTTING MACHINE IS CAPABLE

OF AMPUTATING HANDS AND FEET

AND THROWING OBJECTS. FAILURE

TO OBSERVE THE FOLLOWING

SAFETY INSTRUCTIONS COULD

RESULT IN SERIOUS INJURY OR

DEATH.

General Operation

Read, understand, and follow all instructions on the machine and in the manual before starting.

It is recommended that someone be aware that you are mowing and can provide help in case of injury or accident.

Do not put hands or feet near rotating parts or under the machine. Keep clear of the discharge opening at all times.

Only allow responsible adults, who are familiar with the instructions, to operate the machine.

Clear the area of objects such as rocks, toys, wire, etc., which could be picked up and thrown by the blades.

Be sure the area is clear of bystanders before operating. Stop machine if anyone enters the area.

Never carry passengers. The machine is only intended for use by one person.

Do not mow in reverse unless absolutely necessary. Always look down and behind before and while backing.

Never direct discharged material toward anyone. Avoid discharging material against a wall or obstruction. Material may ricochet back toward the operator. Stop the blades when crossing gravel surfaces.

Do not operate machine without the entire grass catcher, discharge guard, or other safety devices in place and working

Slow down before turning.

Never leave a running machine unattended. Always turn off blades, set parking brake, stop engine, and remove keys before dismounting.

WARNING!

This symbol means that important safety instructions need to be emphasized. It concerns your safety.

0000-000

Read the operator’s manual before starting the machine

0000-000

Clear the area of objects before mowing

9

Image 9
Contents Operator Manual All rights reserved Contents Page Introduction Manufacturing Number Good ServiceXxxx xxxxxx xxxxx xxxx Xxxxxx xxxxxxxxx. xx xxxxxxxx Symbols and DecalsRemove key before Performing any Safety Safety InstructionsGeneral Operation Never take passengers Slope Operation Personal Safety EquipmentBe extra cautious when driving on slopes Safe Handling of Gasoline General Maintenance Risk of sparking Transport Spark Arrestors Rollover Protection System RopsControl Locations ControlsMotion Control Levers Blade Switch Parking BrakeThrottle Control Ignition Switch Choke Control FusesHour Meter Cutting Height Pedals Tracking KnobSeat Adjustment Lever Seat should not be adjusted while unit is in motionFuel Shut Off Valve Fuel Tank Operation TrainingSteering Before Starting Roll Bar and Safety BeltStarting the Engine Set the throttle Open the fuel tank valve Set the engine speed Weak Battery Jumper Cables UseTo remove cables, reverse order Running Operating on Hills Mowing Tips Stopping the Engine Bypass Valves Moving Machine By HandMaintenance Maintenance Battery For cleaningFor replacing Safety System Fuel FilterTire Pressures Parking brake adjustment Measure gap Deck Belt Installation Deck BeltDeck Belt Removal Pump Belt Belt InstallationBelts Replacing Pump BeltCutting Blades Leveling Deck Adjusting the Mower DeckCaster Wheels Removal and InstallationAnti-scalp Rollers Deck Lift SpringCleaning Use protective glasses when cleaning and washingHardware Lubrication Lubrication ScheduleGeneral Cables Wheel and Deck ZerksFront Wheel Mount Front Wheel BearingsFluid and Filter Change Hydraulic DriveTransmission Purging Procedures Problem Cause TroubleshootingTroubleshooting Service StorageWinter Storage Wiring Diagram Technical Data PZ 5426FX PZ5430 EngineTransmission PZ 5426FX PZ5430 Frame DimensionTorque Specifications Standard HardwareMetric Standard Hardware USA requirements Conformity CertificatesDelivery Service Service JournalAfter 10 hours Daily Service Hour Service Service Journal Service Journal At Least Once Each Year Service Journal Service Journal Page 115 461527 Rev B 2011-12-2