Husqvarna 967009803, RZ46215 warranty Troubleshooting

Page 48

TROUBLESHOOTING

Problem

Cause

 

 

 

Engine overheats

Clogged air intake or cooling fins

 

Engine overloaded

 

• Poor ventilation around engine

 

• Defective engine speed regulator

 

• Too little or no oil in the engine

 

• Contamination in the carburetor or fuel line.

 

Fouled spark plugs

 

 

 

Battery not charging

Poor contact of the battery terminal cable connections

 

• Charging lead is disconnected

 

 

 

The machine moves slowly, unevenly, or not at all

Parking brake on

 

• Bypass valve on pump open

 

• Drive belt for the transmission slack or has come off

 

• Air trapped in hydraulic system

 

 

 

Mower deck not engaging

Drive belt for the mower deck has come loose

 

• Contact for the electromagnetic coupling has loosened

 

• Blade switch is faulty or has come loose from cable

 

 

contact

 

Blown fuse

 

 

 

Transaxle leaks oil

Damaged seals, housing, or gaskets

 

• Air trapped in hydraulic system

 

 

 

Uneven mowing results

Different air pressure in tires on the left and right sides.

 

Bent blades

 

• Suspending for the mower deck is uneven

 

Blades are dull

 

• Driving speed too high

 

• Grass is too long

 

• Grass collected under the mower deck

48

Image 48 Contents
Operator Manual All rights reserved Contents Page Introduction Good Service Manufacturing NumberSymbols and Decals Xxxx xxxxxx xxxxx xxxx Xxxxxx xxxxxxxxx. xx xxxxxxxxRemove key before Performing any Safety Safety InstructionsGeneral Operation Never take passengers Personal Safety Equipment Slope OperationBe extra cautious when driving on slopes Safe Handling of Gasoline General Maintenance With water Transport Spark ArrestorControls Control LocationsSteering Control Levers Blade Switch Parking BrakeThrottle Control Ignition Switch Choke ControlFuse Fuel Tank Cutting Height Adjuster Fuel Shut Off ValveBypass Linkages Always raise the deck to the highest position for transportSeat Adjustment Lever Seat should not be adjusted while unit is in motionHour Meter Tracking KnobOperation TrainingSteering Before Starting Starting the Engine Place controls in neutral position Press in and turn the ignition key to the start position Weak Battery Jumper Cables UseTo remove cables, reverse order Running Operating On Hills Mowing Tips Stopping the Engine Moving Machine By Hand Maintenance Maintenance ScheduleDaily Maintenance interval Least Hours Once Each Before AfterDaily At least Maintenance Once Interval Each Hours Before After 100 300Battery Replacing batterySafety System Tire Pressures Anti-scalp RollersDeck Belt Installation BeltsDeck Belt Removal Cutting Blades Adjusting the Mower Deck Leveling deckCleaning Removal and installation of caster wheelUse protective glasses when cleaning and washing Caster Wheels Lubrication Lubrication Schedule General Engine Oil Change Wheel and Deck ZerksFront Wheel Mount Front Wheel BearingsTransmission Deck SpindlesTroubleshooting Problem CauseMaintenance Section Troubleshooting Service StorageWinter Storage Schematics Technical Data Torque SpecificationsAccessories Standard HardwareDimensions EngineTransmission FrameConformity Certificates USA requirementsService Journal Delivery ServiceHour Service After the First 10 HoursPerform the 25-hour service At Least Once Each Year Service Journal Page 115 621427 Rev a 2013-08-15
Related manuals
Manual 40 pages 45.17 Kb