Husqvarna PZ29D CE, 966616701 manual Rollover Protection System Rops, Spark Arrestor

Page 17

SAFETY

Rollover Protection System (ROPS)

The ROPS increases the basic weight of the unit by 73 lbs/33 kg.

Do not use the ROPS as a lifting, attaching or anchoring point.

Do not use the ROPS for wrecking or towing.

Do not exceed Max GVW: 2822 lbs/1283 kg.

Securely fasten the seat belt if the unit has a ROPS.

Where possible, avoid operating the unit near ditches, embankments and holes.

Reduce speed when turning, crossing slopes and on rough, slick or muddy surfaces.

Stay off slopes too steep for safe operation.

Be aware of the mowing path, especially at row ends, on roads and around trees.

Do not permit take passengers.

Operate the mower smoothly, make no jerky turns, starts or stops.

When the mower is stopped, set brakes securely and use the park brake.

If any part of the ROPS is damaged, the entire ROPS must be replaced.

Before each use, check for the correct torque on all bolts, including those on the seat belt.

Check the ROPS structure for damage before each use.

ROPS bar is NOT intended for use in sub zero temperatures.

WARNING!

The rollover protection system's capabilities may be impaired by damage if the mower is overturned or if alteration to the ROPS occurs. If these conditions take place, the total structure MUST be replaced.

WARNING!

This mower is equipped with an internal combustion engine and should not be used on or near any unimproved forested, bush covered or grassy lands unless the engine's system is equipped with a spark arrester meeting applicable local or state laws (if any).

WARNING!

The engine and the exhaust system become very hot during operation.

There is risk for burns if touched.

Allow engine and exhaust system to cool to a safe temperature before refueling.

Spark Arrestor

A spark arrester is standard equipment on the unit and is attached to the engine muffler. Clean the interior screen regularly, depending on usage and conditions.

The engine and the exhaust system become very hot during operation and there is risk for burns if touched.

Allow the exhaust system to cool to a safe temperature before cleaning the screen.

To clean, slide the spark arrestor screen out of the muffler. Clean the carbon from the screen with a soft brush or cloth.

Replace screen and reattach the tail pipe, orienting the tail pipe either horizontally or upwards, away from grassy surfaces.

8065-063

Regularly clean spark arrestor screen

17

Image 17
Contents Operator Manual 2011 HTC. All rights reserved Orangeburg, SC Contents Page Introduction Manufacturing Number Good ServiceImportant Information Symbols and DecalsRemove key before Performing any General Operation SafetySafety Instructions Never take passengers Slope Operation Personal Safety EquipmentBe extra cautious when driving on slopes Safe Handling of Diesel Fuel General Maintenance Risk of sparking Transport Spark Arrestor Rollover Protection System RopsControl Locations ControlsMotion Control Levers Parking Brake Blade SwitchTracking Knob Hour MeterIgnition Switch Coolant Temperature Battery VoltageControl Module Oil PressureCutting Height Pedals Seat AdjustmentsPump Release Valves FusesFuel Shut Off Valve Fuel Tanks Steering OperationTraining Before Starting Roll Bar and Safety BeltStarting the Engine Set the throttle Turn the key to RUN and observe glow plug light To remove cables, reverse order Weak BatteryJumper Cables Use Running Operating on Hills Stopping the Engine Mowing Tips Pump Release Valves Moving Machine By HandEngine and Radiator MaintenanceMaintenance For replacing BatteryFor cleaning Tire Pressures Safety SystemFuel Filter Parking brake adjustment Alignment Drive Lever AdjustmentHeight Adjustment Deck Belt Removal Deck Belt InstallationDeck Belt Replacing Pump Belt Belt Removal/InstallationPump Belt Clutch Belt ReinstallationBelts RemovalCutting Blades Leveling Deck Adjusting the Mower DeckCaster Wheels Removal and InstallationAnti-scalp Rollers Deck Lift SpringHardware CleaningUse protective glasses when cleaning and washing General LubricationLubrication Schedule Front Wheel Mount Wheel and Deck ZerksFront Wheel Bearings Deck SpindleFluid and Filter Change Hydraulic DriveTransmission Purging Procedures Problem Cause Troubleshooting GuideTroubleshooting Guide Winter Storage ServiceStorage Wiring Diagram Torque Specifications Technical DataHex Head Cap Screws Standard HardwareTransmission EngineCombi Deck Flat Deck Frame DimensionVibrations Noise EmissionsConformity Certificates For Model Listed Below Conformity CertificatesUSA requirements EU Declaration of Conformity InformationDelivery Service Service JournalAfter 10 hours Daily Service Hour Service Service Journal Service Journal At Least Once Each Year Service Journal Page 115 404727 Rev B Original Instructions 2011-11-30

PZ29D CE, 966616701 specifications

The Husqvarna 966616701, PZ29D CE, stands out as a premier choice among professional-grade zero-turn mowers, designed to cater to the needs of both landscape professionals and avid homeowners. Known for its powerful performance and innovative technology, the PZ29D CE showcases impressive features that enhance efficiency and durability.

At the heart of the PZ29D CE is a robust engine capable of delivering high power output, allowing users to tackle tough mowing tasks with ease. Typically equipped with a reliable Kawasaki engine, this mower ensures consistent performance, reducing downtime and enhancing productivity. The engine’s design focuses on fuel efficiency without compromising power, which is crucial for extensive mowing applications.

One of the standout features of the Husqvarna PZ29D CE is its cutting deck. The mower often features a wide cutting deck that ranges from 52 to 60 inches, depending on the specific model. This breadth of cutting gets the job done quickly, allowing operators to cover large areas in a short time. Additionally, the deck design often incorporates advanced air flow technology that can produce a clean and even cut, even in varied grass conditions.

The zero-turn capability of the PZ29D CE enhances maneuverability significantly, allowing for tight turns and easy navigation around obstacles. This feature is essential for professional landscapers who need to maintain precision while working around trees, flower beds, and fences. The intuitive controls make it easy for users to handle the mower, ensuring a smooth operational experience.

Comfort is also a priority in the design of the PZ29D CE. The plush, adjustable seat provides ample support during long hours of mowing, while the ergonomic control layout minimizes fatigue for the operator. This design consideration is vital for those who rely on their equipment for extended periods.

Additionally, the Husqvarna PZ29D CE incorporates features for improved safety, including roll-over protection systems and safety switches that engage when the operator leaves the seat.

In conclusion, the Husqvarna 966616701, PZ29D CE, combines powerful performance, advanced cutting technology, and operator comfort, making it a reliable and efficient choice for those seeking a high-performing zero-turn mower. Whether for commercial landscaping or residential maintenance, this model exemplifies the very best in lawn care technology.