Hydraulic Drive, Fluid and Filter Change

LUBRICATION

Hydraulic Drive

Fluid and Filter Change

The hydraulic drive is designed with an external filter for ease of maintenance. To ensure constant fluid quality levels and longer life, an oil filter change interval of every 500 hours is recommended.

The following procedure can be performed with the pump installed in the vehicle, and the vehicle on level ground.

1.Lock the vehicle parking brake.

2.Place an oil drain pan with a 2 gallon capacity beneath the oil reservoir. Remove the drain port and drain oil. Remove the oil filter from the pump.

3.After the oil has drained, wipe the filter base

Drain old oil filters of all free-flowing oil prior to disposal. Place used oil in appropriate containers and dispose of it in accordance with laws in your area.

8065-076

Hydraulic pump oil filter

surface off and apply a film of new oil to the gasket of the new replacement filter.

4.Prefill the oil filter with new oil and install the new filter by hand. Turn ¾ to one full turn after the filter gasket contacts the filter base surface.

5.Fill reservoir with synthetic 15W 50 oil to the level of the lower hole in the fill tube. DO NOT fill above the level of the upper hole. After purging, check levels and add oil if necessary.

6.Reinstall the reservoir cap by hand. Do not overtighten.

7.Proceed to the purge procedure.

Do not fill above
this level	Minimum fill level

PZ29D CE, 966616701 specifications

The Husqvarna 966616701, PZ29D CE, stands out as a premier choice among professional-grade zero-turn mowers, designed to cater to the needs of both landscape professionals and avid homeowners. Known for its powerful performance and innovative technology, the PZ29D CE showcases impressive features that enhance efficiency and durability.

At the heart of the PZ29D CE is a robust engine capable of delivering high power output, allowing users to tackle tough mowing tasks with ease. Typically equipped with a reliable Kawasaki engine, this mower ensures consistent performance, reducing downtime and enhancing productivity. The engine’s design focuses on fuel efficiency without compromising power, which is crucial for extensive mowing applications.

One of the standout features of the Husqvarna PZ29D CE is its cutting deck. The mower often features a wide cutting deck that ranges from 52 to 60 inches, depending on the specific model. This breadth of cutting gets the job done quickly, allowing operators to cover large areas in a short time. Additionally, the deck design often incorporates advanced air flow technology that can produce a clean and even cut, even in varied grass conditions.

The zero-turn capability of the PZ29D CE enhances maneuverability significantly, allowing for tight turns and easy navigation around obstacles. This feature is essential for professional landscapers who need to maintain precision while working around trees, flower beds, and fences. The intuitive controls make it easy for users to handle the mower, ensuring a smooth operational experience.

Comfort is also a priority in the design of the PZ29D CE. The plush, adjustable seat provides ample support during long hours of mowing, while the ergonomic control layout minimizes fatigue for the operator. This design consideration is vital for those who rely on their equipment for extended periods.

Additionally, the Husqvarna PZ29D CE incorporates features for improved safety, including roll-over protection systems and safety switches that engage when the operator leaves the seat.

In conclusion, the Husqvarna 966616701, PZ29D CE, combines powerful performance, advanced cutting technology, and operator comfort, making it a reliable and efficient choice for those seeking a high-performing zero-turn mower. Whether for commercial landscaping or residential maintenance, this model exemplifies the very best in lawn care technology.