Husqvarna 966582101, RZ3019BF manual Choke Control, Fuel Tank

Page 20

CONTROLS

Choke Control

The choke control is used for cold starts in order to provide the engine with a richer fuel mixture.

For cold starts the throttle should be pushed fully forward to the choke position.

WARNING!

Gasoline is highly flammable. Observe caution and fill the tank outdoors (see the safety instruction).

Fuel Tank

Read the safety instructions before refueling. The machine has one fuel tank, just behind the seat. The tank volume is 3 gallons (11.4 liters).

Make sure the fuel cap is properly tightened and the cap gasket is not damaged.

The engine will run on a minimum of 85-octane unleaded gasoline (no oil mix). Environmentally adapted alkylate gasoline can be used. See also Technical Data concerning ethanol fuel. Methanol fuel is not allowed. Do not use E85 alcohol based fuel. Damage to engine and components may occur.

IMPORTANT INFORMATION

Experience indicates that alcohol blended fuels (called gasohol, ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel the next season. See Storage Instructions for additional information. Never use engine or carburetor cleaners in the fuel tank or permanent damage may occur.

8058-122

Choke control

8050-012

Fuel tank

WARNING!

The engine and the exhaust system, become very hot during operation.

Risk for burns if touched.

Allow engine and exhaust system to cool at least two (2) minutes before refueling

WARNING!

Fill to bottom of filler neck. Do not overfill. Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Operator Manual Page Contents Page Introduction Good Service Manufacturing NumberSymbols and decals Xxxx xxxxxx xxxxx xxxx Xxxxxx xxxxxxxxx. xx xxxxxxxxManual General Operation SafetySafety Instructions Never take passengers Personal Safety Equipment Slope OperationChildren Safe Handling of Gasoline General Maintenance Risk of sparking Transport Spark ArrestorControls Control LocationsSteering Control Levers Throttle Control Ignition SwitchParking Brake Choke Control Fuel TankFuel Shut Off Valve Mower Deck Lifting LeverTracking Always use the high position F to transportBlade Control Lever Bypass LinkageTraining SteeringBefore Starting Starting the EnginePlace controls in neutral position Open the fuel valve Jumper cables To remove cables, reverse orderRunning Operating on Hills Mowing Tips Stopping the Engine Manual Transport Maintenance Maintenance ScheduleBefore After Year Always use protective glasses when handling the battery BatteryTo clean battery and terminals Safety System Tire PressuresTo replace deck belt BeltsDeck Belt EZT Belt Cutting BladesAdjusting the Mower Deck Leveling DeckCleaning Removal and installation of caster wheelUse protective glasses when cleaning and washing Caster WheelsLubrication GeneralFront Wheel Mount Front Wheel BearingsEngine Lubrication Steering Control ShaftsTroubleshooting Problem CauseTroubleshooting Service Winter StorageSchematic Standard Hardware Technical DataTorque Specifications Transmission RZ3019 BFEngine Productivity Overall dimensionsEquipment CONForMITY Certificates USA RequirementsService Journal Delivery ServiceHour Service Perform the 25-hour service At Least Once Each Year Page 115 355026R2 09/14/10

RZ3019BF, 966582101 specifications

The Husqvarna 966582101, RZ3019BF, is a high-performance zero-turn mower designed for both residential and commercial use. Renowned for its robust construction and user-friendly features, it delivers exceptional efficiency and maneuverability, making lawn maintenance a breeze.

One of the standout features of the RZ3019BF is its powerful 19 HP Kawasaki engine, which offers reliable performance and enough power to tackle tough mowing jobs. This engine not only provides efficient cutting power but also enhances fuel efficiency, allowing users to operate the mower for extended periods without frequent refueling. The combination of the engine's output and the mower's compact design enables it to navigate tight spaces with ease.

Another highlight of the Husqvarna RZ3019BF is its cutting deck. Equipped with a 42-inch fabricated cutting deck, this mower delivers a clean and even cut across various types of grass. The 3-blade system ensures that grass is cut finely and effectively, contributing to a healthier lawn. With adjustable cutting heights between 1.5 and 4 inches, users can customize their mowing experience based on lawn conditions and personal preferences.

The zero-turn capability of the RZ3019BF allows it to pivot and maneuver around obstacles without missing a spot. This feature makes it ideal for complex lawns and gardens, helping to maximize efficiency and save time. The ergonomic controls enhance user comfort, making it easy to operate for extended periods.

Technologically, the RZ3019BF is equipped with a premium gauge steel frame that adds to its durability while keeping maintenance manageable. The mower's easy-access maintenance points simplify servicing, ensuring the machine remains in top condition with minimal effort.

Users also appreciate the large rear tires that provide excellent traction and stability, ensuring smooth operation on various terrains. Furthermore, the mower's compact design allows for easy storage, making it a practical choice for homeowners with limited space.

In summary, the Husqvarna 966582101, RZ3019BF, combines power, efficiency, and maneuverability, making it an excellent choice for anyone looking to maintain their lawn effortlessly. With its strong engine, effective cutting deck, and user-friendly features, this mower stands out in its category, promising performance and longevity for years to come.
Top Page Image Contents