Husqvarna RZ3019BF, 966582101 manual Jumper cables, To remove cables, reverse order

Page 27

operation

Slowly push the choke control down when the engine has started.

Set the desired engine speed with the throttle. Allow the engine to run at a moderate speed, “half throttle” for 3-5 minutes before loading it to heavily. USE FULL THROTTLE WHEN MOWING (no choke).

WARNING!

Engine exhaust and certain vehicle components contain or emit chemicals considered to cause cancer, birth defects, or other reproductive system damage. The engine exhaust contains carbon monoxide, which is a odorless, colorless, poisonous gas. Do not use the machine in enclosed spaces.

WARNING!

Lead-acid batteries generate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries.

If your battery is too weak to start the engine, it should be recharged. (See Battery in the Maintenance section.)

If jumper cables are used for emergency starting, follow this procedure:

Jumper cables

1.Connect each end of the RED cable to the POSITIVE (+) terminal on each battery, taking care not to short against chassis.

2.Connect one end of the BLACK cable to the NEGATIVE (-) terminal of the fully charged battery.

3.Connect the other end of the BLACK cable to a good CHASSIS GROUND on the mower with the discharged battery, away from the fuel tank and battery.

To remove cables, reverse order

1.Remove BLACK cable first from chassis and then from the fully charged battery.

2.Remove RED cable last from both batteries.

8058-122

Use full throttle when mowing

IMPORTANT INFORMATION

Your mower is equipped with a 12-volt negative grounded system. The other vehicle must also be a 12-volt negative grounded system. Do not use your mower to start other vehicles.

8011-642

Jumper cable connection

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Operator Manual Page Contents Page Introduction Manufacturing Number Good ServiceXxxx xxxxxx xxxxx xxxx Xxxxxx xxxxxxxxx. xx xxxxxxxx Symbols and decalsManual Safety Safety InstructionsGeneral Operation Never take passengers Slope Operation Personal Safety EquipmentChildren Safe Handling of Gasoline General Maintenance Risk of sparking Spark Arrestor TransportControl Locations ControlsSteering Control Levers Ignition Switch Parking BrakeThrottle Control Fuel Tank Choke ControlAlways use the high position F to transport Fuel Shut Off ValveMower Deck Lifting Lever TrackingBypass Linkage Blade Control LeverSteering TrainingStarting the Engine Before StartingPlace controls in neutral position Open the fuel valve To remove cables, reverse order Jumper cablesRunning Operating on Hills Mowing Tips Stopping the Engine Manual Transport Maintenance Schedule MaintenanceBefore After Year Battery To clean battery and terminalsAlways use protective glasses when handling the battery Tire Pressures Safety SystemBelts Deck BeltTo replace deck belt Cutting Blades EZT BeltLeveling Deck Adjusting the Mower DeckCaster Wheels CleaningRemoval and installation of caster wheel Use protective glasses when cleaning and washingGeneral LubricationSteering Control Shafts Front Wheel MountFront Wheel Bearings Engine LubricationProblem Cause TroubleshootingTroubleshooting Winter Storage ServiceSchematic Technical Data Torque SpecificationsStandard Hardware RZ3019 BF EngineTransmission Overall dimensions EquipmentProductivity USA Requirements CONForMITY CertificatesDelivery Service Service JournalHour Service Perform the 25-hour service At Least Once Each Year Page 115 355026R2 09/14/10

RZ3019BF, 966582101 specifications

The Husqvarna 966582101, RZ3019BF, is a high-performance zero-turn mower designed for both residential and commercial use. Renowned for its robust construction and user-friendly features, it delivers exceptional efficiency and maneuverability, making lawn maintenance a breeze.

One of the standout features of the RZ3019BF is its powerful 19 HP Kawasaki engine, which offers reliable performance and enough power to tackle tough mowing jobs. This engine not only provides efficient cutting power but also enhances fuel efficiency, allowing users to operate the mower for extended periods without frequent refueling. The combination of the engine's output and the mower's compact design enables it to navigate tight spaces with ease.

Another highlight of the Husqvarna RZ3019BF is its cutting deck. Equipped with a 42-inch fabricated cutting deck, this mower delivers a clean and even cut across various types of grass. The 3-blade system ensures that grass is cut finely and effectively, contributing to a healthier lawn. With adjustable cutting heights between 1.5 and 4 inches, users can customize their mowing experience based on lawn conditions and personal preferences.

The zero-turn capability of the RZ3019BF allows it to pivot and maneuver around obstacles without missing a spot. This feature makes it ideal for complex lawns and gardens, helping to maximize efficiency and save time. The ergonomic controls enhance user comfort, making it easy to operate for extended periods.

Technologically, the RZ3019BF is equipped with a premium gauge steel frame that adds to its durability while keeping maintenance manageable. The mower's easy-access maintenance points simplify servicing, ensuring the machine remains in top condition with minimal effort.

Users also appreciate the large rear tires that provide excellent traction and stability, ensuring smooth operation on various terrains. Furthermore, the mower's compact design allows for easy storage, making it a practical choice for homeowners with limited space.

In summary, the Husqvarna 966582101, RZ3019BF, combines power, efficiency, and maneuverability, making it an excellent choice for anyone looking to maintain their lawn effortlessly. With its strong engine, effective cutting deck, and user-friendly features, this mower stands out in its category, promising performance and longevity for years to come.
Top Page Image Contents