Husqvarna RZ3019BF, 966582101 manual Battery, To clean battery and terminals

Page 35

MAINTENANCE

Battery

Your mower is equipped with a maintenance free battery that does not need servicing. However, periodic charging of the battery with an automotive type battery charger will extend its life.

Keep battery and terminals clean.

Keep battery bolts tight.

See chart for charging times.

To clean battery and terminals

Corrosion and dirt on the battery and terminals can cause the battery to “leak” power.

1.Open the terminal access doors.

2.Remove the red terminal guard.

3.Disconnect BLACK battery cable first, then the RED battery cable and remove the battery from the machine.

4.Rinse the battery with plain water and dry.

5.Clean terminals and battery cable ends with wire brush until shiny.

6.Coat terminals with grease or petroleum jelly

7.Reinstall battery.

IMPORTANT INFORMATION

Do not attempt to open or remove caps or covers. Adding or checking level of electrolyte is not necessary.

Always use two wrenches for the terminal screws.

Replacing battery

1.Lift seat and rotate forward.

2.Remove the terminal guard.

3.Using two ½" wrenches disconnect BLACK battery cable then RED battery cable.

4.Unscrew the knob and remove battery hold down.

5.Carefully remove the battery from the mower.

6.Install new battery with terminals in the same position as the old battery.

7.Reinstall battery hold down.

8.First connect RED battery cable to positive (+) battery terminal with hex bolt and hex nut.

9.Connect BLACK grounding cable to negative (-) battery terminal with remaining hex bolt and hex nut.

10.Fit the terminal guard.

11.Lower seat.

Always use protective glasses when handling the battery.

STANDARD

STATE

APPROXIMATE BATTERY CHARGING TIME*

 

 

TO FULL CHARGE AT 80OF / 27OC

BATTERY

OF

 

 

 

 

 

Maximum Rate at:

 

 

 

 

 

 

CHARGE

 

 

 

 

 

50 Amps

30 Amps

20 Amps

10 Amps

 

 

 

 

 

 

 

 

12.6V

100%

- FULL CHARGE -

 

 

 

 

 

 

12.4V

75%

20 min.

35 min.

48 min.

90 min.

 

 

 

 

 

 

12.2V

50%

45 min.

75 min.

95 min.

180 min.

 

 

 

 

 

 

12.0V

25%

65 min.

115 min.

145 min.

280 min.

 

 

 

 

 

 

11.8V

0%

85 min.

150 min.

195 min.

370 min.

 

 

 

 

 

 

*Charging time depends on battery capacity,

condition, age, temperature and efficiency of charger

WARNING!

Do not short battery terminals by allowing a wrench or any other object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands, rings, etc.

Positive terminal must be connected first to prevent sparks from accidental grounding.

8050-109

Battery cleaning and installation

35

Image 35
Contents Operator Manual Page Contents Page Introduction Manufacturing Number Good ServiceXxxx xxxxxx xxxxx xxxx Xxxxxx xxxxxxxxx. xx xxxxxxxx Symbols and decalsManual General Operation SafetySafety Instructions Never take passengers Slope Operation Personal Safety EquipmentChildren Safe Handling of Gasoline General Maintenance Risk of sparking Spark Arrestor TransportControl Locations ControlsSteering Control Levers Throttle Control Ignition SwitchParking Brake Fuel Tank Choke ControlAlways use the high position F to transport Fuel Shut Off ValveMower Deck Lifting Lever TrackingBypass Linkage Blade Control LeverSteering TrainingStarting the Engine Before StartingPlace controls in neutral position Open the fuel valve To remove cables, reverse order Jumper cablesRunning Operating on Hills Mowing Tips Stopping the Engine Manual Transport Maintenance Schedule MaintenanceBefore After Year Always use protective glasses when handling the battery BatteryTo clean battery and terminals Tire Pressures Safety SystemTo replace deck belt BeltsDeck Belt Cutting Blades EZT BeltLeveling Deck Adjusting the Mower DeckCaster Wheels CleaningRemoval and installation of caster wheel Use protective glasses when cleaning and washingGeneral LubricationSteering Control Shafts Front Wheel MountFront Wheel Bearings Engine LubricationProblem Cause TroubleshootingTroubleshooting Winter Storage ServiceSchematic Standard Hardware Technical DataTorque Specifications Transmission RZ3019 BFEngine Productivity Overall dimensionsEquipment USA Requirements CONForMITY CertificatesDelivery Service Service JournalHour Service Perform the 25-hour service At Least Once Each Year Page 115 355026R2 09/14/10

RZ3019BF, 966582101 specifications

The Husqvarna 966582101, RZ3019BF, is a high-performance zero-turn mower designed for both residential and commercial use. Renowned for its robust construction and user-friendly features, it delivers exceptional efficiency and maneuverability, making lawn maintenance a breeze.

One of the standout features of the RZ3019BF is its powerful 19 HP Kawasaki engine, which offers reliable performance and enough power to tackle tough mowing jobs. This engine not only provides efficient cutting power but also enhances fuel efficiency, allowing users to operate the mower for extended periods without frequent refueling. The combination of the engine's output and the mower's compact design enables it to navigate tight spaces with ease.

Another highlight of the Husqvarna RZ3019BF is its cutting deck. Equipped with a 42-inch fabricated cutting deck, this mower delivers a clean and even cut across various types of grass. The 3-blade system ensures that grass is cut finely and effectively, contributing to a healthier lawn. With adjustable cutting heights between 1.5 and 4 inches, users can customize their mowing experience based on lawn conditions and personal preferences.

The zero-turn capability of the RZ3019BF allows it to pivot and maneuver around obstacles without missing a spot. This feature makes it ideal for complex lawns and gardens, helping to maximize efficiency and save time. The ergonomic controls enhance user comfort, making it easy to operate for extended periods.

Technologically, the RZ3019BF is equipped with a premium gauge steel frame that adds to its durability while keeping maintenance manageable. The mower's easy-access maintenance points simplify servicing, ensuring the machine remains in top condition with minimal effort.

Users also appreciate the large rear tires that provide excellent traction and stability, ensuring smooth operation on various terrains. Furthermore, the mower's compact design allows for easy storage, making it a practical choice for homeowners with limited space.

In summary, the Husqvarna 966582101, RZ3019BF, combines power, efficiency, and maneuverability, making it an excellent choice for anyone looking to maintain their lawn effortlessly. With its strong engine, effective cutting deck, and user-friendly features, this mower stands out in its category, promising performance and longevity for years to come.