Husqvarna RZ3019BF, 966582101 manual Parking Brake, Throttle Control, Ignition Switch

Page 19

CONTROLS

Parking Brake

The parking brake is found on the right side of the machine. Pull the lever backward to activate the brake and push forward to release it.

IMPORTANT INFORMATION

The machine must stand absolutely still when applying the parking brake. Always set the parking brake before dismounting. Release the parking brake before moving the mower.

Throttle Control

The throttle control regulates the engine speed and thereby the rate of rotation of the blades.

In order to increase or decrease the engine speed, the control is moved forward or back respectively.

Avoid idling the engine for long periods, as there is a risk of fouling the spark plugs.

USE FULL THROTTLE WHEN MOWING, for best mower performance and battery charging.

Ignition Switch

The ignition key is placed on the control panel and is used to start and stop the engine.

IMPORTANT INFORMATION

Do not run the starter for more than five seconds each time. If the engine does not start, wait about 10 seconds before retrying.

8050-005

Parking brake not activated

8058-122

Throttle control

8058-122

Ignition switch

19

Image 19
Contents Operator Manual Page Contents Page Introduction Manufacturing Number Good ServiceXxxx xxxxxx xxxxx xxxx Xxxxxx xxxxxxxxx. xx xxxxxxxx Symbols and decalsManual Safety Instructions SafetyGeneral Operation Never take passengers Slope Operation Personal Safety EquipmentChildren Safe Handling of Gasoline General Maintenance Risk of sparking Spark Arrestor TransportControl Locations ControlsSteering Control Levers Parking Brake Ignition SwitchThrottle Control Fuel Tank Choke ControlAlways use the high position F to transport Fuel Shut Off ValveMower Deck Lifting Lever TrackingBypass Linkage Blade Control LeverSteering TrainingStarting the Engine Before StartingPlace controls in neutral position Open the fuel valve To remove cables, reverse order Jumper cablesRunning Operating on Hills Mowing Tips Stopping the Engine Manual Transport Maintenance Schedule MaintenanceBefore After Year To clean battery and terminals BatteryAlways use protective glasses when handling the battery Tire Pressures Safety SystemDeck Belt BeltsTo replace deck belt Cutting Blades EZT BeltLeveling Deck Adjusting the Mower DeckCaster Wheels CleaningRemoval and installation of caster wheel Use protective glasses when cleaning and washingGeneral LubricationSteering Control Shafts Front Wheel MountFront Wheel Bearings Engine LubricationProblem Cause TroubleshootingTroubleshooting Winter Storage ServiceSchematic Torque Specifications Technical DataStandard Hardware Engine RZ3019 BFTransmission Equipment Overall dimensionsProductivity USA Requirements CONForMITY CertificatesDelivery Service Service JournalHour Service Perform the 25-hour service At Least Once Each Year Page 115 355026R2 09/14/10

RZ3019BF, 966582101 specifications

The Husqvarna 966582101, RZ3019BF, is a high-performance zero-turn mower designed for both residential and commercial use. Renowned for its robust construction and user-friendly features, it delivers exceptional efficiency and maneuverability, making lawn maintenance a breeze.

One of the standout features of the RZ3019BF is its powerful 19 HP Kawasaki engine, which offers reliable performance and enough power to tackle tough mowing jobs. This engine not only provides efficient cutting power but also enhances fuel efficiency, allowing users to operate the mower for extended periods without frequent refueling. The combination of the engine's output and the mower's compact design enables it to navigate tight spaces with ease.

Another highlight of the Husqvarna RZ3019BF is its cutting deck. Equipped with a 42-inch fabricated cutting deck, this mower delivers a clean and even cut across various types of grass. The 3-blade system ensures that grass is cut finely and effectively, contributing to a healthier lawn. With adjustable cutting heights between 1.5 and 4 inches, users can customize their mowing experience based on lawn conditions and personal preferences.

The zero-turn capability of the RZ3019BF allows it to pivot and maneuver around obstacles without missing a spot. This feature makes it ideal for complex lawns and gardens, helping to maximize efficiency and save time. The ergonomic controls enhance user comfort, making it easy to operate for extended periods.

Technologically, the RZ3019BF is equipped with a premium gauge steel frame that adds to its durability while keeping maintenance manageable. The mower's easy-access maintenance points simplify servicing, ensuring the machine remains in top condition with minimal effort.

Users also appreciate the large rear tires that provide excellent traction and stability, ensuring smooth operation on various terrains. Furthermore, the mower's compact design allows for easy storage, making it a practical choice for homeowners with limited space.

In summary, the Husqvarna 966582101, RZ3019BF, combines power, efficiency, and maneuverability, making it an excellent choice for anyone looking to maintain their lawn effortlessly. With its strong engine, effective cutting deck, and user-friendly features, this mower stands out in its category, promising performance and longevity for years to come.